Table of Contents
- Title and Copyright Information
- Preface
- 1 About Oracle Server X8-8
-
2
Troubleshooting and Diagnostics
- Detecting and Managing Server Faults
- Troubleshooting Using Diagnostic Tools
- Troubleshooting Using Status Indicators
- Troubleshooting Server Subsystems
- Attaching Devices to the Server
- Getting Help
- Auto Service Requests
-
3
Preparing for Service
- Electrostatic Discharge and Static Prevention Measures
- Safety Symbols
- FRU Key Identity Properties (KIP) Automated Update
- Required Tools and Equipment
-
Preparing the Server for Component Replacement
- Serviceability Overview
- Prepare the Server for Hot Service (Oracle ILOM CLI)
- Prepare the Server for Hot Service (Oracle ILOM Web Interface)
- Prepare the Server for Warm Service (Oracle ILOM CLI)
- Prepare the Server for Warm Service (Oracle ILOM Web Interface)
- Prepare the Server for Cold Service (Oracle ILOM CLI)
- Prepare the Server for Cold Service (Oracle ILOM Web Interface)
-
Powering Down the Server
- Power Off the Server Gracefully (Oracle ILOM CLI)
- Power Off the Server Gracefully (Oracle ILOM Web Interface)
- Power Off the Server Gracefully (Power Button)
- Power Off the Server for Immediate Shutdown (Oracle ILOM CLI)
- Power Off the Server for Immediate Shutdown (Oracle ILOM Web Interface)
- Power Off the Server for Immediate Shutdown (Power Button)
- Power Off the Server Using the Server OS
- Remove Power
- Power Control, Shutdown, and Reset States
- Managing the Locate Button/LED
-
4
Servicing Components
- Servicing Storage Drives (CRU)
- Servicing Fan Modules (CRU) and Fan Frames (CRU)
- Servicing Power Supplies (CRU)
- Servicing PCIe Cards and Carriers (CRU)
-
Servicing CPU Module (CMOD) Components (FRU)
- CMOD Slot Locations and Numbering
- CMOD Population Rules
- Remove a CMOD
- Remove the CMOD Cover
- Install the CMOD Cover
- Install a CMOD
- Servicing Processors (FRU)
- Servicing DIMMs (CRU)
- Upgrade the Server From Four to Eight CMODs (FRU)
- Servicing System Module (SMOD) Components (FRU)
- Servicing the Front Indicator Module (FRU)
- Servicing the Midplane Assembly (FRU)
- 5 Returning the Server to Operation
-
6
Configuring the System Socket Modes
- System Socket Mode Configurations
- Oracle X8-8 CPU Packages
- Configure Single 4-Socket Server to Dual 4-Socket Servers (FRU)
- Configure Dual 4-Socket Server to Single 8-Socket Server (CRU)
- Configure Single 8-Socket Server to Dual 4-Socket Server (CRU)
- Configure Single 4-Socket Server to Single 8-Socket Server (FRU)
- Verify the Current Socket Mode Configuration
- Verify the CMOD Configuration
- 7 Setting Up BIOS Configuration Parameters
-
8
BIOS Setup Utility Menu Options
- BIOS Main Menu Selections
-
BIOS Advanced Menu Selections
- BIOS Advanced Menu Serial Port Console Redirection Options
- BIOS Advanced Menu Network Stack Configuration Options
- BIOS Advanced Menu NVMe Configuration Options
- BIOS Advanced Menu Primary Video Selection Options
- BIOS Advanced Menu Trusted Computing 2.0 Options
- BIOS Advanced Menu Disk Freeze Lock Settings Option
- BIOS Advanced Menu Processor Configuration Options
- BIOS Advanced Menu Memory Configuration Options
- BIOS Advanced Menu CPU Power Management Configuration Options
- BIOS Advanced Menu USB Ports Options
- BIOS Advanced Menu Error Injection Settings Option
- BIOS Advanced Menu UPI General Configuration Options
- BIOS Advanced Menu T1s Auth Configuration Options
- BIOS Advanced Menu RAM Disk Configuration Options
- BIOS Advanced Menu iSCSI Configuration Options
- BIOS Advanced Menu Intel Virtual RAID on CPU Options
- BIOS Advanced Menu Gigabit Network Connection Options
- BIOS Advanced Menu Driver Health Options
- BIOS IO Menu Selections
- BIOS Boot Menu Selections
- BIOS Save and Exit Menu Selections
- 9 Monitoring and Identifying Server Components
- Index