1. Oracle Server X8-8 Service Manual
  2. Troubleshooting and Diagnostics
  3. Troubleshooting Using Status Indicators
  4. Dual PCIe Card Carrier (DPCC) Indicators

Dual PCIe Card Carrier (DPCC) Indicators

Each DPCC has two indicator panels, one for each PCIe slot inside the server. Each panel contains a green OK indicator, an amber Fault-Service Required LED, and a recessed pinhole Attention (ATTN) button. The ATTN buttons are used to initiate DPCC removal and install. Before removing a DPCC, use a stylus to press both ATTN buttons. After installing a DPCC that contains a PCIe card, press the ATTN buttons again.


An illustration showing the DPCC indicator panels.
Call Out Status LED Icon and Color Description

1

ATTN

ATTN

Attention (ATTN) DPCC recessed pinhole button to initiate DPCC removal and install

2

Fault-Service Required/ Locate LED
Service Action Required LED icon

Amber


Locate Button/LED icon

Indicates a fault state in DPCC:

  • Off – Server is operating normally.

  • Steady On – A fault is present in the DPCC PCIe slot.

DPCC Locate LED:

  • Off – DPCC is operating normally.

  • Fast blink – Use Oracle ILOM to activate this LED to enable you to locate a DPCC quickly and easily.

3

DPCC OK indicator
OK LED icon

Green

Indicates the operational state of DPCC:

  • Off – DPCC power is not present.

  • Flashing – DPCC is booting.

  • Steady On – DPCC power is on and running.