SMOD Components
The following illustration shows an SMOD (system module) and associated components, including an Oracle Storage 12 Gb SAS PCIe RAID HBA, internal: 16 port and 2 GB memory installed below the SMOD, one SAS cable that connects the HBA card to the server storage backplane, and an ESM extension cable that connects the energy storage module (ESM) to the HBA card.
| Call Out | Description |
|---|---|
|
1 |
SAS host bus adaptor (HBA): Oracle Storage 12 Gb SAS PCIe RAID HBA, internal: 16 port and 2 GB memory |
|
2 |
Energy storage module (ESM) |
|
3 |
Cable from HBA to ESM |
|
4 |
SMOD motherboard |
|
5 |
Storage drive SMOD midplane connectors (4) |
|
6 |
Four server storage drives 0-3 (HDD/SSD), back panel accessible |
|
7 |
External USB port, back panel accessible |
|
8 |
NET MGT ILOM service processor (SP) network management 10/100/1000BASE-T Network port, back panel accessible |
|
9 |
Serial management port labeled SER MGT port. IO port, back panel accessible |
|
10 |
NET 0-3 10 GbE network ports labeled NET0, NET1, NET2, and NET3. Network ports, back panel accessible |
|
11 |
Service processor (SP) - concealed location |
|
12 |
Real time clock 3V lithium coin cell battery |
|
13 |
Real time clock 3V lithium coin cell battery socket |
|
14 |
SAS storage drive backplane cable |
For component serviceability, locations, and designations, see Replaceable Components.
For replacement procedures, see Servicing System Module (SMOD) Components (FRU).