Index
C
- cable management arm (CMA)
- cables
- cabling the server 2.2.1, 2.3.1
- chassis, aligning mounting bracket with C.7.3
- chassis components E.1
- chassis serial number, locating 2.5.2
- circuit breaker and UPS guidelines B.2.3
- clearance, airflow B.3.3
- components
E
- Exadata Server X10M 1.1
- components and nomenclature E.1
- connecting devices to server 2.2
- ConnectX-6 Dx SmartNIC
- status indicators A.8
- controls, front panel 1.2
- cooling
- troubleshooting issues 2.1.4
- cooling unit components E.3
- crossover pinouts for SER MGT port 2.2.6
D
E
- electrical power requirements B.2
- electrostatic discharge
- environmental
- requirements B.3
- ESD precautions C.6.2
- Ethernet cables, connecting 2.2.1
- Ethernet ports
- status indicators A.6
- Exadata Server X10M 1
- Exadata Server X10M with 12-Drive backplane 1.4
- Exadata Server X10M with 4-Drive backplane 1.4
- extend server 3.6.3
- external cables, back panel 2.2.2
- external cables, connecting 2.2.1, 2.3.1
- external cap 12.1
F
- facility power checklist D
- facility power guidelines B.2.1
- fan module
- fan tray
- fault identification
- Fault Remind button
- Fault-Service Required LED A.1
- FIM
- installing 15.2
- firmware components E.1
- first-time log in
- Oracle ILOM 2.3
- flash riser board
- front panel indicators 1.2
- FRU key identity properties (KIP) 3.4
- full height PCIe configuration 1.3
I
- identifying server faults 2.4
- illustrated parts breakdown 1.4
- installation C
- installation prerequisites C.6
- installation procedure C.5
- installing
- installing components
- 12-Drive backplane 14.4
- 4-Drive backplane 14.2
- battery 10.2
- DBP signal cable 14.6
- DIMMs 9.7
- fan module 6.2
- fan tray 6.4
- flash riser board 7.2
- LED indicator module 15.2
- M.2 flash SSD 7.4
- motherboard assembly 12.2
- PCIe cards 11.3, 11.5
- PCIe flyover cable 11.10
- PCIe riser 11.7
- power supply 5.3
- processors 13.3
- SAS cables 16.2
- server into rack 17.5
- server top cover 17.3
- storage drives 4.4
- installing server
- internal M.2 flash SSDs
- description 1.5
- inventory, ship kit C.6.4
M
- M.2 flash solid-state drives (SSDs) 7
- M.2 flash SSD
- Main power 3.6.1.3, 3.6.1.4, 3.6.1.6
- maintenance space guidelines C.2
- management software 1.1
- marking rackmount location C.7.4
- Mellanox CX-6 Dx SmartNIC
- status indicators A.8
- memory 9
- memory device components E.7
- motherboard
- status indicators A.7
- motherboard assembly
- mounting brackets, installing C.7.3
O
- OK to Remove indicator
- storage drives A.4
- On/Standby
- open problems
2.4
- using to obtain status 2.1.1
- operating system installation
- summary C.8
- optimal range
- humidity B.3.1
- Oracle ILOM 2.4
- Oracle ILOM CLI 2.2.3
- Oracle ILOM interfaces
- connection 2.3
- Oracle Integrated Lights Out Manager (ILOM)
- key identity properties (KIP) for FRUID auto-update feature 3.4
- Ortano SmartNIC
- status indicators A.9
P
- PCIe cards
- PCIe configuration 1.1
- PCIe flyover cable
- PCIe Flyover cable 11.3, 11.5, 11.8
- PCIe riser
- PCIe risers
- replacing 11
- PCIe slot electrical interface 11.8
- PCIe slot numbering 11.1
- Pensando Ortano SmartNIC
- status indicators A.9
- population rules
- DIMMs 9.3
- population scenarios
- DIMMs 9.2
- ports
- ports, back panel 1.3
- power
- power down server
- power off the system, options 3.6.1, 4.2
- power-on self-test (POST) code checkpoint tests A.1
- power supply
- power unit components E.2
- preparation checklists D
- processor components E.6
- processors
- processor socket cover
- product description 1.1
- product information 18
- PSU 5
R
- rack
- rackmount
- rackmount instructions C.7
- rackmount procedure C.7
- RAID, fault 4.2
- remote ethernet connection 2.3
- removing cable management arm C.7.9
- removing components
- 12-Drive backplane 14.3
- 4-Drive backplane 14.1
- air baffle 8
- antistatic measures 17.4
- battery 10.1
- DBP signal cable 14.5
- DIMMs 9.6
- fan module 6.1
- fan tray 6.3
- flash riser board 7.1
- LED indicator module 15.1
- M.2 flash SSD 7.3
- motherboard assembly 12.1
- PCIe cards 11.2, 11.4
- PCIe flyover cable 11.9
- PCIe riser 11.6
- power supply 5.2
- processors 13.2
- SAS cables 16
- server top cover 3.6.6
- storage drives 4.3
- requirements
- reset SP 2.2.8
- Root-of-Trust circuitry, connecting to the 2.3.1
S
- safety
- safety precautions C.6.1
- SAS cables
- SAS Storage Drive Configuration 1.2
- serial management (SER MGT) port
- configuring serial port sharing 2.2.3
- serial number, locating 2.5.2
- serial port, SP Oracle ILOM CLI 2.2.3
- serial port, SP Oracle ILOM web 2.2.3
- serial port sharing
- configuring 2.2.3
- server
- diagnosing 2
- diagnosing faults 2.1
- drive specifications B.5
- exploded view 1.4
- hardware fault management 2.1
- installing into rack 17.5
- physical specifications B.1
- preparing for service 3
- removing from rack 3.6.4
- resetting with Oracle ILOM 2.3.2
- returning server to operation 17
- space requirements C.3
- troubleshooting 2, 2.1
- Server hardware faults
- managing 2.1.5
- server top cover
- server troubleshooting, information when contacting support 2.5.1
- service
- service processor 1.3
- resetting using pinhole switch 2.2.8
- service processor, connecting to the 2.3.1
- service references
- shipping inventory, checking for damage C.6.4
- shipping inventory contents C.6.4
- shutting down the system
- site planning checklists D
- slide-rail assemblies, attaching to rack C.7.6
- solid state drive (SSD) components E.5
- specifications B
- agency compliance B.4
- SP Oracle ILOM CLI 2.2.3
- Standby power 3.6.2
- status indicators A, E
- storage drive 4.5
- storage drives
- support for product 2.5.1
- system chassis components E.1
- system firmware components E.9
- system motherboard components E.8
- System OK indicator A.1
- system status, viewing using Oracle ILOM 2.1.1