1. Exadata Server X10M Service Manual
  2. Servicing Fan Modules
  3. Install the Fan Tray

Install the Fan Tray

Perform this procedure only when servicing Disk backplane, SAS cables, and Motherboard assembly replaceable components:

  1. Lower the fan tray into the server.
    Ensure all motherboard cables are clear of the fan tray and fan tray gasket. Figure showing the fan tray being installed in the server.
  2. When installing the fan tray, the fan tray should first be slightly tilted to the left to compress the cables, before the operation.
    Ensure all motherboard cables are clear of the fan tray and fan tray gasket. Figure showing the fan tray being lowered in the server.
  3. Using a Torx T25 screwdriver, tighten the five spring-mounted screws that secure the fan tray to the server chassis.
    Figure showing the fan tray being secured in the server.
  4. Install the fan modules into the fan tray.
  5. Install the air baffle.
  6. Continue with the next step in the service procedure.