| Skip Navigation Links | |
| Exit Print View | |
|
Sun Datacenter InfiniBand Switch 36 HTML Document Collection for Firmware Version 2.1 |
USB Management Connector and Pins
InfiniBand QSFP Connector and Pins
Understanding InfiniBand Cabling
Preparing to Install the Switch
Suggested Tools for Installation
Antistatic Precautions for Installation
Verify Shipping Carton Contents
Assemble the Optical Fiber InfiniBand Cables
Install the Switch in the Rack
Verifying the InfiniBand Fabric
Network Management Troubleshooting Guidelines
Understanding Routing Through the Switch
Understanding Administrative Commands
Administering the I4 Switch Chip
Controlling the I4 Switch Chip
Administering the Subnet Manager
Controlling the Subnet Manager
Configuring Secure Fabric Management
Administering the InfiniBand Fabric
Monitoring the InfiniBand Fabric
Controlling the InfiniBand Fabric
Understanding Oracle ILOM on the Switch
Understanding Oracle ILOM Targets
Administering Oracle ILOM (CLI)
Accessing Oracle ILOM From the CLI
Switching Between the Oracle ILOM Shell and the Linux Shell
Monitoring Oracle ILOM Targets (CLI)
Controlling Oracle ILOM Targets (CLI)
Upgrading the Switch Firmware Through Oracle ILOM (CLI)
Administering Oracle ILOM (Web)
Access Oracle ILOM From the Web Interface
Monitoring Oracle ILOM Targets (Web)
Controlling Oracle ILOM Targets (Web)
Upgrade the Switch Firmware (Web)
Accessing the Rear Panel Diagram
Accessing Status Pane Information
Monitoring Parameters and Status
Administering Oracle ILOM (SNMP)
Monitoring Oracle ILOM Targets (SNMP)
Controlling Oracle ILOM Targets (SNMP)
Display the Sensor States (IPMI)
Display the Sensor Information (IPMI)
Display the System Event Log (IPMI)
Display FRU ID Information (IPMI)
Display Switch Status LED States (IPMI)
Disable the Locator LED (IPMI)
Understanding Oracle ILOM Commands
Identify Faults in the Oracle ILOM Event Log
Determining the Alarm State of a Component or System
Understanding Service Procedures
Antistatic Precautions for Service
Determine If a Power Supply Is Faulty
Inspecting the InfiniBand Cables
Determine If the Battery Is Faulty
Remove the Switch From the Rack
Understanding Hardware Commands
Linux Shells for Hardware Commands
Understanding InfiniBand Commands
Linux Shells for InfiniBand Commands
Understanding the SUN-DCS-IB-MIB MIB OIDs
Understanding the SUN-FABRIC-MIB MIB OIDs
Understanding the SUN-HW-TRAP-MIB MIB OIDs
Understanding the SUN-ILOM-CONTROL-MIB MIB OIDs
Understanding the SUN-PLATFORM-MIB MIB OIDs
Accessing CLI Prompts
Accessing the Management Controller
Access the Management Controller From the NET MGT Port
Access the Management Controller From the USB Management Port
Accessing Oracle ILOM From the CLI
Access Oracle ILOM From the Web Interface
Access the Oracle ILOM Shell From the CLI (USB Management Port)
Accessing the Rear Panel Diagram
Accessing Status Pane Information
Acoustic Noise Emissions
Acquire the Switch Firmware Package (CLI)
Add Connectors to the Autodisable List
Add or Remove an Element From the Fabric Configuration
Add or Delete an Element From the Configuration
Add an Oracle ILOM User Account (CLI)
Add SNMP Service Communities (CLI)
Add SNMP Service User Accounts (CLI)
Add an Oracle ILOM User Account (SNMP)
Add an Oracle ILOM User Account (Web)
Add SNMP Service Communities (Web)
Add SNMP Service User Accounts (Web)
Add or Remove a Port From a Partition
Add Secret M_Keys to the Configuration
Create the smnodes List
Administering the Chassis
Administering Hardware (IPMI)
Administering the I4 Switch Chip
Administering the InfiniBand Fabric
Administering Oracle ILOM (CLI)
Administering Oracle ILOM (SNMP)
Administering Oracle ILOM (Web)
Administering the Subnet Manager
Understanding Administrative Commands
Aggregate Sensor States
Presence Sensor Alarm Conditions
State Sensor Alarm Conditions
Oracle ILOM Target Alarm States
Disable Alerts (CLI)
Display the Alert Properties (CLI)
Enable Alerts to Send Email Alerts (CLI)
Enable Alerts to Send PETs (CLI)
Enable Alerts to Send SNMP Traps (CLI)
Disable Alerts (SNMP)
Display the Alert Properties (SNMP)
Enable Alerts to Send Email Alerts (SNMP)
Enable Alerts to Send PETs (SNMP)
Enable Alerts to Send SNMP Traps (SNMP)
Modify Alert SNMP Version (SNMP)
Disable Alerts (Web)
Display the Alert Properties (Web)
Enable Alerts to Send Email Alerts (Web)
Enable Alerts to Send PETs (Web)
Enable Alerts to Send SNMP Traps (Web)
Assemble the Optical Fiber InfiniBand Cables
Attach the InfiniBand Cables
Attach the Management Cables
Attach the Power Cords
Add Connectors to the Autodisable List
Delete Connectors From the Autodisable List
Display Connectors Configured With Autodisable Functionality
Autodisable Functionality
Reenable Autodisabled Connectors
Autodisabling Ports and Connectors
Oracle Auto Service Request