| Skip Navigation Links | |
| Exit Print View | |
|
Sun Datacenter InfiniBand Switch 36 HTML Document Collection for Firmware Version 2.1 |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun Datacenter InfiniBand Switch 36 HTML Document Collection for Firmware Version 2.1 |
USB Management Connector and Pins
InfiniBand QSFP Connector and Pins
Understanding InfiniBand Cabling
Preparing to Install the Switch
Suggested Tools for Installation
Antistatic Precautions for Installation
Verify Shipping Carton Contents
Assemble the Optical Fiber InfiniBand Cables
Install the Switch in the Rack
Verifying the InfiniBand Fabric
Network Management Troubleshooting Guidelines
Understanding Routing Through the Switch
Understanding Administrative Commands
Administering the I4 Switch Chip
Controlling the I4 Switch Chip
Administering the Subnet Manager
Controlling the Subnet Manager
Configuring Secure Fabric Management
Administering the InfiniBand Fabric
Monitoring the InfiniBand Fabric
Controlling the InfiniBand Fabric
Understanding Oracle ILOM on the Switch
Understanding Oracle ILOM Targets
Administering Oracle ILOM (CLI)
Accessing Oracle ILOM From the CLI
Switching Between the Oracle ILOM Shell and the Linux Shell
Monitoring Oracle ILOM Targets (CLI)
Controlling Oracle ILOM Targets (CLI)
Upgrading the Switch Firmware Through Oracle ILOM (CLI)
Administering Oracle ILOM (Web)
Access Oracle ILOM From the Web Interface
Monitoring Oracle ILOM Targets (Web)
Controlling Oracle ILOM Targets (Web)
Upgrade the Switch Firmware (Web)
Accessing the Rear Panel Diagram
Accessing Status Pane Information
Monitoring Parameters and Status
Administering Oracle ILOM (SNMP)
Monitoring Oracle ILOM Targets (SNMP)
Controlling Oracle ILOM Targets (SNMP)
Display the Sensor States (IPMI)
Display the Sensor Information (IPMI)
Display the System Event Log (IPMI)
Display FRU ID Information (IPMI)
Display Switch Status LED States (IPMI)
Disable the Locator LED (IPMI)
Understanding Oracle ILOM Commands
Identify Faults in the Oracle ILOM Event Log
Determining the Alarm State of a Component or System
Understanding Service Procedures
Antistatic Precautions for Service
Determine If a Power Supply Is Faulty
Inspecting the InfiniBand Cables
Determine If the Battery Is Faulty
Remove the Switch From the Rack
Understanding Hardware Commands
Linux Shells for Hardware Commands
Understanding InfiniBand Commands
Linux Shells for InfiniBand Commands
Understanding the SUN-DCS-IB-MIB MIB OIDs
Understanding the SUN-FABRIC-MIB MIB OIDs
Understanding the SUN-HW-TRAP-MIB MIB OIDs
Understanding the SUN-ILOM-CONTROL-MIB MIB OIDs
Understanding the SUN-PLATFORM-MIB MIB OIDs
Displays links presence.
listlinkup [link][peer][internal|all|connected]
This hardware command lists the presence of links and the up-down state of the associated ports on the switch chip.� The listlinkup command also accepts these arguments:
link – Displays additional information about the links.
peer – Displays additional information about the peer ports.
internal – Displays only internal links.
all – Displays all link types.
connected – Displays only links that are connected to other nodes.
The listlinkup command is available from the /SYS/Switch_Diag and /SYS/Fabric_Mgmt Linux shell targets of the Oracle ILOM CLI interface.
This example shows how to display comprehensive information about all link presence, associated ports, link state, and information about the peers with the listlinkup command.
FabMan@switch_name->listlinkup link peer all
Connector 0A Not present
Connector 1A Present <-> Switch Port 22 is up (Enabled)
Peer: "SUN DCS 36P QDR techpubs 10.132.124.33" Peerport: 8
NodeGUID: 0x0021283a8980a0a0 LID: 0x0001
Connector 2A Not present
Connector 3A Not present
Connector 4A Not present
Connector 5A Not present
Connector 6A Not present
Connector 7A Present <-> Switch Port 33 is up (Enabled)
Peer: "SUN DCS 36P QDR techpubs 10.132.124.33" Peerport: 34
NodeGUID: 0x0021283a8980a0a0 LID: 0x0001
Connector 8A Not present
Connector 9A Present <-> Switch Port 14 is up (Enabled)
Peer: "SUN DCS 36P QDR techpubs 10.132.124.33" Peerport: 29
NodeGUID: 0x0021283a8980a0a0 LID: 0x0001
Connector 10A Not present
Connector 11A Not present
Connector 12A Not present
Connector 13A Not present
Connector 14A Not present
Connector 15A Not present
Connector 16A Not present
Connector 17A Not present
Connector 0B Not present
Connector 1B Not present
Connector 2B Not present
Connector 3B Not present
Connector 4B Not present
Connector 5B Present <-> Switch Port 29 is up (Enabled)
Peer: "SUN DCS 36P QDR techpubs 10.132.124.33" Peerport: 14
NodeGUID: 0x0021283a8980a0a0 LID: 0x0001
Connector 6B Not present
Connector 7B Present <-> Switch Port 34 is up (Enabled)
Peer: "SUN DCS 36P QDR techpubs 10.132.124.33" Peerport: 33
NodeGUID: 0x0021283a8980a0a0 LID: 0x0001
Connector 8B Not present
Connector 9B Not present
Connector 10B Not present
Connector 11B Not present
Connector 12B Not present
Connector 13B Not present
Connector 14B Present <-> Switch Port 08 is up (Enabled)
Peer: "SUN DCS 36P QDR techpubs 10.132.124.33" Peerport: 22
NodeGUID: 0x0021283a8980a0a0 LID: 0x0001
Connector 15B Not present
Connector 16B Not present
Connector 17B Not present
FabMan@switch_name->
|