ibnetstatus Command

Displays status of the InfiniBand fabric.

Syntax

ibnetstatus [-h]

Description

This InfiniBand command provides a short status report of the InfiniBand fabric. It provides output equivalent to ibdiagnet -ls 10 -lw 4x.

The ibnetstatus command is available from the /SYS/Switch_Diag and /SYS/Fabric_Mgmt Linux shell targets of the Oracle ILOM CLI interface.

Options

The -h option provides help.

Example

This example shows how to display the status of the InfiniBand fabric with the ibnetstatus command.

FabMan@switch_name->ibnetstatus
Loading IBDIAGNET from: /usr/lib/ibdiagnet1.2
-W- Topology file is not specified.
     Reports regarding cluster links will use direct routes.
Loading IBDM from: /usr/lib/ibdm1.2
-I- Using port 0 as the local port.
-I- Discovering ... 9 nodes (2 Switches & 7 CA-s) discovered.
-I---------------------------------------------------
-I- Bad Guids/LIDs Info
-I---------------------------------------------------
-I- skip option set. no report will be issued
-I---------------------------------------------------
-I- Links With Logical State = INIT
-I---------------------------------------------------
-I- No bad Links (with logical state = INIT) were found
-I---------------------------------------------------
-I- PM Counters Info
-I---------------------------------------------------
-W- lid=0x0010 guid=0x00212856cfe2c0a0 dev=48438 Port=1
 Performance Monitor counter     : Value
 symbol_error_counter            : 0xffff (overflow)
-W- lid=0x0010 guid=0x00212856cfe2c0a0 dev=48438 Port=2
 Performance Monitor counter     : Value
 symbol_error_counter            : 0xffff (overflow)
-W- lid=0x0010 guid=0x00212856cfe2c0a0 dev=48438 Port=3
 Performance Monitor counter     : Value
 symbol_error_counter            : 0xffff (overflow)
-W- lid=0x0010 guid=0x00212856cfe2c0a0 dev=48438 Port=4
 Performance Monitor counter     : Value
 symbol_error_counter            : 0xffff (overflow)
-I---------------------------------------------------
-I- Links With links width != 4x (as set by -lw option)
-I---------------------------------------------------
-I- No unmatched Links (with width != 4x) were found
-I---------------------------------------------------
-I- Links With links speed != 10 (as set by -ls option)
-I---------------------------------------------------
-I- No unmatched Links (with speed != 10) were found
-I---------------------------------------------------
-I- Fabric Partitions Report (see ibdiagnet.pkey for a full hosts list)
-I---------------------------------------------------
-I---------------------------------------------------
-I- IPoIB Subnets Check
-I---------------------------------------------------
-I- Subnet: IPv4 PKey:0x0001 QKey:0x00000b1b MTU:2048Byte rate:10Gbps SL:0x00
-W- No members found for group
-I- Subnet: IPv4 PKey:0x7fff QKey:0x00000b1b MTU:2048Byte rate:10Gbps SL:0x00
-W- No members found for group
-I---------------------------------------------------
-I- Bad Links Info
-I- No bad link were found
-I---------------------------------------------------
-I- Stages Status Report:
 STAGE                                    Errors Warnings
 Bad GUIDs/LIDs Check                     0      0 
 Link State Active Check                  0      0 
 Performance Counters Report              0      4 
 Specific Link Width Check                0      0 
 Specific Link Speed Check                0      0 
 Partitions Check                         0      0 
 IPoIB Subnets Check                      0      2 
----------------------------------------------------------------
-I- Done. Run time was 22 seconds.
FabMan@switch_name->

Related Information

• ibnetstatus man page

• ibdiagnet Command

• Linux Shells for InfiniBand Commands