ibstat Command

Queries basic status of InfiniBand devices.

Syntax

ibstat [-d][-e][-h][-l][-s][-p][-V] ca_name [ca_port]

where:

• ca_name is the channel adapter name.

• ca_port is the channel adapter port.

Description

This InfiniBand software command displays basic information retrieved from the local InfiniBand driver. Output of the command includes:

• LID

• SMLID

• port logical state

• link width

• port physical state

The ibstat command is available from the /SYS/Switch_Diag and /SYS/Fabric_Mgmt Linux shell targets of the Oracle ILOM CLI interface.

Options

This table describes the options to the ibstat command and their purposes.

Example

This example shows how to display the basic status from the local InfiniBand driver with the ibstat command.

FabMan@switch_name->ibstat
Switch 'is4_0'
     Switch type: MT48436
     Number of ports: 0
     Firmware version: 7.4.2200
     Hardware version: a1
     Node GUID: 0x0021283a8980a0a0
     System image GUID: 0x0021283a8980a0a3
     Port 0:
         State: Active
         Physical state: LinkUp
         Rate: 40
         Base lid: 1
         LMC: 0
         SM lid: 1
         Capability mask: 0x4250084a
         Port GUID: 0x0021283a8980a0a0
FabMan@switch_name->

Related Information

• ibstat man page

• Linux Shells for InfiniBand Commands