ibtracert Command

Traces the InfiniBand path.

Syntax

ibtracert [-d][-D][-G][-h][-m mlid][-s smlid][-v][-V][-C ca_name][-P ca_port][-t timeout][lid|dr_path|guid [startlid [endlid]]]

where:

• mlid is the multicast LID.

• smlid is the Subnet Manager LID.

• ca_name is the channel adapter name.

• ca_port is the channel adapter port.

• timeout is the timeout in milliseconds.

• lid is the local identifier.

• dr_path is the directed path.

• guid is the global unique identifier.

• startlid is the starting LID for a range.

• endlid is the ending LID for a range.

Description

This InfiniBand command uses SMPs to trace the path from a source GID or LID to a destination GID or LID. Each responding hop in the path is displayed. The -m option enables multicast path tracing between source and destination nodes.

The ibtracert command is available from the /SYS/Switch_Diag and /SYS/Fabric_Mgmt Linux shell targets of the Oracle ILOM CLI interface.

Options

This table describes the options to the ibtracert command and their purposes.

Example

This example shows how to display the path from LID 25 to LID 24 with the ibtracert command.

FabMan@switch_name->ibtracert 15 14
From switch {0x00212856cd22c0a0} portnum 0 lid 15-15 "SUN IB QDR GW switch mnm34-97"
[1] -> ca port {0x00212856cd22c042}[2] lid 14-14 "SUN IB QDR GW switch mnm34-97 Bridge 1"
To ca {0x00212856cd22c040} portnum 2 lid 14-14 "SUN IB QDR GW switch mnm34-97 Bridge 1"
FabMan@switch_name->

Related Information

• ibtracert man page

• ibroute Command

• Linux Shells for InfiniBand Commands