Supported Features

For the implementation of Oracle ILOM 3.0 on the management controller, these features are supported:

• Interfaces – These interfaces are supported:

  • CLI – Succinct and human-readable administration interface.

  • BI – Browser interface or web interface. User-friendly administration interface.

  • SNMP – Advanced user interface for those experienced with SNMP.

  • IPMI – An interface between hardware devices.

• Fault Management – Automatically diagnose and report hardware faults.

• Event and fault monitoring – These events are logged:

  • Oracle ILOM events

  • Switch-specific events – Non-Oracle ILOM events are also logged into the Oracle ILOM event log.

• Firmware upgrade – I4 switch chip and management controller firmware upgrade from a single repository file.

• Fabric Monitor – Browser interface to monitor switch configuration, status, and activity.

• Oracle ILOM support – These features are supported for this implementation of Oracle ILOM:

  • User management – ilom-admin, ilom-operator, and user-created Oracle ILOM accounts.

    ---

    Note - SSH key-based user authentication is not supported.

    ---

  • Network management – IP address, netmask, gateway, and other parameters.

  • Session monitoring – Monitor active user sessions.

  • Service management – HTTP, HTTPS, SNMP, and others.

  • Alert management – Manage propagation of SNMP alerts, IPMI PETs, and Email alerts.

  • DNS – Domain name services are provided.

  • SMTP management – Configure SMTP client setting to support email alerts.

  • Snapshot feature – Take a snapshot of the state of Oracle ILOM.

  • Event management – Manage the local Oracle ILOM event log.

  • Remote syslog – Forward the Syslog to a remote server.

  • Service Tag – Support for the Service Tag program.

  • Back up and restore Oracle ILOM configuration – Save and restore the state of Oracle ILOM.

  • Modification of back up and restore – Switch-specific configuration information can be selectively backed up or restored.

  • NTP management – Automatically set time with NTP servers.

  • Timezone management – Configure the correct timezone for the management controller.

• Start OS shell from Oracle ILOM CLI – Toggle between the Oracle ILOM CLI and the Linux OS.

• Sensors

  • Aggregate sensor – Reports general health of switch, power redundancy, cooling redundancy status, etc.

  • Fan sensors – Return the speed of the fans.

  • Power supply sensors – Report the state of the power supplies.

  • Voltage sensors – Return the various voltages on the main board.

  • Temperature sensors – Report the temperatures within the switch.

• Indicators

• FRU ID – FRU identification information display.

Related Information

• Administering Oracle ILOM (CLI)

• Administering Oracle ILOM (Web)