|
Do not step on the cable or connectors. Plan cable paths away
from foot traffic or rolling loads.
|
|
Do not pull the cable out of the shipping box, through any
opening, or around any corners. Unroll the cable as you lay it
down and move it through turns.
|
|
Do not bend the cables to a radius tighter than 85 mm (3.4
inches). Ensure that cable turns are as wide as possible.
|
|
Do not pack the cable to fit a tight space. Use an alternative
cable route.
|
|
Do not drop the cable or connectors from any height. Gently
set the cable down, resting the cable connectors on a stable
surface.
|
|
Do not drag the cable or its connectors over any surface.
Carry the entire cable to and from the points of connection.
|
|
Do not force the cable connector into the
receptacle by pushing on the cable. Apply connection or
disconnection forces at the connector only.
|
