Remove SLB-L2 Port Members

This example shows removing one port member from a SLB-L2 group. You use the same process to remove an active or standby port member.

1. Remove the member entry.

   SEFOS# configure terminal
   SEFOS(config)# no slb l2 1 extreme-ethernet 0/5
   SEFOS(config)# end
   

2. Show current LBGs and members.

   The following example shows the removal of one of the active SLB server members.

   SEFOS# show slb
    
   L2 SLB Group #1:
           Failover Method: Failover to All Ports
   Port Members:
   Port    State     Comments
   ====    =====     ==================
   3       ACTIVE
   4       ACTIVE
   6       STANDBY