Restart the Interface Following Failure

When the port 16 is repaired and recovered, use the following commands to ensure that the port status has returned to active.

1. Restart the interface.

   SEFOS# configure terminal
   SEFOS(config)# interface extreme-ethernet 0/16
   SEFOS(config-if)# no hutdown
   SEFOS(config-if)# end
   

2. After a few seconds, examine the SLB-L2 output.

   SEFOS# show slb l2
    
   L2 SLB Group #1
   Failover Method: Failover to All ports
    
   Members:
   Port   State     Comments
   ====   =====     =================
    15    ACTIVE
   16    ACTIVE
    17    ACTIVE
    18    ACTIVE
   

   Port 16 is now returned to active state.