Table of Contents

• Title and Copyright Information
• Recovery Appliance Preface
  • Audience
  • Documentation Accessibility
  • Conventions
• Changes in Zero Data Loss Recovery Appliance Owner’s Guide Release 23.1
• Introduction to the Recovery Appliance
  • About the Recovery Appliance
  • Recovery Appliance Rack Components
  • Compute Server Components
  • Storage Server Components
  • About Tape Backup Infrastructure
    • Oracle Recommended Stack
    • Third-Party Tape Systems
  • Restrictions on Modifying Recovery Appliance
• Part I Preinstallation
  • Site Requirements for Recovery Appliance and Oracle Exadata Storage Expansion Rack
    • Reviewing Safety Guidelines
    • Ensuring That the Site is Ready
    • General Environmental Requirements
      • General Environmental Requirements for ZDLRA Rack X6 and Later
    • Space Requirements
      • Space Requirements for Racks up to Recovery Appliance X6
    • Receiving, Unpacking, and Access Route Requirements
      • Rack Weights for Recovery Appliance
    • Maintenance Access Requirements
    • Flooring Requirements
    • Electrical Power Requirements
      • PDU Power Requirements
        • Low-Voltage 15 kVA Single Phase PDU for North America, South America, Japan and Taiwan
        • Low-Voltage 22 kVA Single Phase PDU for North America, South America, Japan and Taiwan
        • Low-Voltage 15 kVA Three Phase PDU for North America, South America, Japan and Taiwan
        • Low-Voltage 24 kVA Three Phase PDU for North America, South America, Japan and Taiwan
        • High-Voltage 15 kVA Single Phase PDU for Europe, the Middle East and Africa (EMEA), and Asia Pacific (APAC), except for Japan and Taiwan
        • High-Voltage 22 kVA Single Phase PDU for Europe, the Middle East and Africa (EMEA), and Asia Pacific (APAC), except for Japan and Taiwan
        • High-Voltage 15 kVA Three Phase PDU for Europe, the Middle East and Africa (EMEA), and Asia Pacific (APAC), except for Japan and Taiwan
        • High-Voltage 24 kVA Three Phase PDU for Europe, the Middle East and Africa (EMEA), and Asia Pacific (APAC), except for Japan and Taiwan
      • Facility Power Requirements
      • Circuit Breaker Requirements
      • Electrical Grounding Guidelines
    • Temperature and Humidity Requirements
    • Ventilation and Cooling Requirements
    • Network Connection and IP Address Requirements for ZDLRA Rack
      • Network Connection Requirements for ZDLRA Rack
      • DNS Configuration for ZDLRA Rack
      • IP Address Requirements for ZDLRA Rack
    • Dedicated Backup Network between Oracle Exadata and Oracle Zero Data Loss Recovery Appliance
  • Preparing Your Networks for Recovery Appliance
    • Overview of Network Requirements
      • About the Network Components and Interfaces
      • Example of Network Connections for Recovery Appliance
      • Connecting Recovery Appliance Rack Components to the Networks
      • Connecting Recovery Appliance to a Tape Library
        • Oracle Recommended Stack
        • Third-Party Tape Systems
      • Using Network VLAN Tagging with Recovery Appliance
    • Registering Recovery Appliance in the Domain Name System
    • Factory IP Address Settings
    • Port Assignments When Using a Firewall
    • Proxy Servers
  • Setting Up Auto Service Request
    • Understanding Auto Service Request
    • Getting Ready to Install ASR
    • Installing ASR Manager
    • Verifying the ASR Manager Installation
    • About the Trap Destinations on Recovery Appliance
    • Troubleshooting ASR
  • Using Oracle Exadata Deployment Assistant
    • Overview of Oracle Exadata Deployment Assistant
      • Considerations and Requirement for Using OEDA
    • Getting Started with the OEDA Browser-based User Interface
    • Using the Browser-based Version of Oracle Exadata Deployment Assistant
• Part II Installation and Configuration
  • Unpacking and Installing ZDLRA Rack
  • Expanding a Recovery Appliance Rack with Additional Storage Servers
    • Preparing to Extend Recovery Appliance
      • Estimating RDMA Network Fabric Cable Path Lengths
      • Obtaining the Current Configuration Information
      • Generating the Network Configuration Files
      • Moving the Audit and Diagnostic Files
      • Synchronizing Release and Patch Levels
    • Precautions and Guidelines
      • General Safety Precautions
      • InfiniBand Cable Precautions
      • InfiniBand Cable Bundling Guidelines
      • Cable Management Arm Guidelines
    • Adding Storage Servers to a Rack
      • Checking the Recovery Appliance Rack
      • Unpacking and Labeling the New Storage Servers
      • Recovery Appliance RA26, RA23, and RA21 Population Rules
      • Removing the Doors
      • Adding New Servers
      • Cabling the Storage Servers
      • Closing the Rack
    • Making New Storage Available
  • Configuring a Recovery Appliance Rack
    • Supporting Auto Service Request
      • Prerequisites for Using Auto Service Request
      • Checking an Existing ASR Manager Installation
      • Installing ASR Manager
    • Installing the Tape Hardware
    • Verifying the Network Configuration Prior to Configuring the Rack
    • Configuring the RDMA Network Fabric Switch
      • Configuring the InfiniBand Switches
        • Configuring an InfiniBand Switch
        • Setting the Time on an InfiniBand Switch
        • Setting the Serial Number on a Spine Switch
        • Checking the Health of an InfiniBand Switch
        • Setting a Spine Switch as the Subnet Manager Master
      • Configuring the Cisco Nexus 9336C-FX2 Switch
    • Configuring the Cisco Ethernet Switch
      • Configuring the Cisco Catalyst 4948 Ethernet Switch
      • Configuring the Cisco Nexus 93108-1G or 9348 Ethernet Switch
        • Performing the Initial Switch Configuration for the Cisco Nexus 93108-1G or 9348 Ethernet Switch
        • Setting the Clock on the Cisco 93108-1G or 9348 Ethernet Switch
      • Disabling Spanning Tree on the Ethernet Switch
    • Configuring the Power Distribution Units
      • Assigning Network Addresses to the PDUs
      • Configuring the PDU System Time Settings
      • Upgrading the PDU Firmware
    • Checking the Health of the Compute Servers
    • Checking the Health of the Storage Servers
    • Verifying the RoCE Network Fabric Configuration
    • Verifying the InfiniBand Network Fabric Network
    • Setting the Subnet Manager Master on Oracle Exadata Database Machine Full Rack and Oracle Exadata Database Machine Half Rack
  • Installing the Recovery Appliance Software
    • About the Installation Software
    • Software Installation Prerequisites
      • About Adding a Rack to an Existing Rack
      • About Adding New Storage Servers to an Existing Rack
    • Reclaiming Disk Space on the Compute Servers
    • Installing the Software on Recovery Appliance
    • Install Utility Syntax
      • Install Utility Parameters
      • Install Utility Syntax Examples
      • About the Install Utility Steps
    • Setting Up Enterprise Manager to Administer Recovery Appliance
      • Deploying the Enterprise Manager Agents
      • Discovering the Cluster
      • Discovering the Cluster Database Targets
      • Discovering the Recovery Appliance
      • Monitoring TLS-enabled Targets
      • Monitoring TLS-enabled Targets with EM Agents
      • Discovering TLS-Enabled Recovery Appliance
• Part III Security and Maintenance of Recovery Appliance
  • User Security on Recovery Appliance
    • Default User Accounts for Oracle Zero Data Loss Recovery Appliance
    • User Roles for the Recovery Appliance
    • RACLI Non-Root User
    • Securing the Operations of the Recovery Appliance
    • Kerberos Authentication and the Recovery Appliance
    • LDAP Authentication and the Recovery Appliance
    • Quorum
    • Default Password Requirements
    • Default Security Settings Implemented by OEDA
  • Keeping the Recovery Appliance Secure
    • Securing the Hardware
      • Getting the Rack Serial Number
      • Getting the Serial Numbers for Rack Components
      • Getting the Rack Serial Number for a Cisco 9336C or 9348 Switch
      • Getting the Rack Serial Number for a Sun Datacenter InfiniBand Switch 36
      • Getting the Serial Number for a Cisco 4948 Ethernet Switch
    • Securing the Software
    • Maintaining a Secure Environment
      • Maintaining Network Security
  • Recovering the Recovery Appliance
  • Maintaining the Recovery Appliance Hardware
    • Cautions and Warnings
    • Determining the Server Model
    • Powering On and Off a Recovery Appliance Rack
      • Emergency Power-Off Procedure
        • Powering Off in an Emergency
        • About the Emergency Power-Off Switch
      • Shutting Down Recovery Appliance
        • Stopping Recovery Appliance Services
        • Powering Down the Servers
        • Powering the Network Switches
      • Starting Up Recovery Appliance
        • Starting Up Recovery Appliance Components
        • Startup Sequence
        • Powering On Servers Remotely
        • Starting the Recovery Appliance Software
    • Replacing the Disk Controller Batteries
      • Monitoring Batteries in the Compute Servers
      • Replacing Batteries in Disk Controllers
    • Replacing a Power Distribution Unit
      • PDU Replacement Guidelines
      • Replacing a PDU
    • Replacing a Tape Drive
    • Save Configuration before Updating Firmware
    • Resetting a Non-Responsive Oracle ILOM
      • Resetting Oracle ILOM Using SSH
      • Resetting Oracle ILOM Using the Remote Console
      • Resetting Oracle ILOM Using IPMItool
      • Resetting Oracle ILOM By Removing Power
    • Maintaining the Compute Servers
      • Verifying the RAID Status of a Compute Server
    • Reimaging a Compute Server
      • Contacting Oracle Support Services
      • Downloading the Latest Release of the Cluster Verification Utility
      • Removing the Failed Compute Server from the Cluster
      • Preparing the USB Flash Drive for Imaging
      • Copying the Image to the New Compute Server
      • Configuring the Replacement Compute Server
      • Preparing the Replacement Compute Server for the Cluster
      • Applying Patch Bundles to a Replacement Compute Server
      • Cloning the Oracle Grid Infrastructure
      • Clone Oracle Database Homes to the Replacement Compute Server
    • Maintaining the Storage Servers
      • Shutting Down a Storage Server
      • Enabling Network Connectivity Using the Diagnostics ISO
    • Maintaining the Physical Disks of Storage Servers
      • About System Disks and Data Disks
      • Monitoring the Status of Physical Disks
      • What Happens When Disk Errors Occur?
      • About Detecting Underperforming Disks
      • About Rebalancing the Data
      • Monitoring Hard Disk Controller Write-Through Cache Mode
      • Replacing a Failed Physical Disk
      • Replacing a Faulty Physical Disk
      • Removing an Underperforming Physical Disk
      • Moving All Drives from One Storage Server to Another
      • Removing and Replacing the Same Physical Disk
      • Reenabling a Rejected Physical Disk
    • Maintaining the Flash Disks of Storage Servers
      • About the Flash Disks
      • Faulty Status Indicators
      • Identifying Flash Disks in Poor Health
      • Identifying Underperforming Flash Disks
      • When Is It Safe to Replace a Faulty Flash Disk?
      • Replacing a Failed Flash Disk
      • Replacing a Faulty Flash Disk
      • Removing an Underperforming Flash Disk
      • About Write-Back Flash Cache
    • Replacing a Disk Controller Battery Backup Unit
      • Replacing a Disk Controller BBU on a Compute Server
      • Replacing a Disk Controller BBU on a Storage Server
    • Using the Storage Server Rescue Procedure
      • First Steps Before Rescuing the Storage Server
        • If the Server Has Normal Redundancy
        • If the Server Has High Redundancy
      • About the Rescue Procedure
      • Rescuing a Server Using the CELLBOOT USB Flash Drive
      • Reconfiguring the Rescued Storage Server
      • Recreating a Damaged CELLBOOT USB Flash Drive
  • Reconfiguring the Hardware
    • Changing Component Passwords
      • Changing the Compute Server Passwords
        • Changing the User Account Password
        • Changing the GRUB Account Password
      • Changing the Storage Server Passwords
      • Creating New Users and Changing Passwords on a PDU
      • Changing the Oracle ILOM Password
      • Changing an InfiniBand Switch Password
      • Changing the Cisco Ethernet Switch Password
      • Changing the Recovery Appliance Database User Password
      • Changing OSB Tape Backup Passwords
    • Changing the DNS Servers
      • Changing the DNS Server Address on an InfiniBand Switch
      • Changing the DNS Server Address on the Cisco Ethernet Switch
      • Changing the DNS Server Address on the Compute Server
      • Changing the DNS Server on Storage Servers
    • Changing the chrony/NTP Servers
      • Setting the NTP Server Address on the Compute Servers
      • Setting the CHRONY Server Address on the InfiniBand Switches
      • Set the NTP Server Address on the Cisco Ethernet Switch
      • Setting the CHRONY Server on the Storage Servers
      • Restart Recovery Appliance
    • Changing the Time Zone Settings
      • Changing the Time Zone Settings on the Storage Servers
      • Change Time Zone Settings on the Compute Servers
      • Change the Time Zone Settings on the InfiniBand Switches
      • Change the Time Zone Settings on the Cisco Switch
• Part IV Recovery Appliance Command Line Interface Reference
  • RACLI Overview
    • racli add admin_user
    • racli add certificate
    • racli add cloud_key
    • racli add cloud_location
    • racli add cloud_user
    • racli add credential
    • racli add credential_wallet
    • racli add db_user
    • racli add db_user_profile
    • racli add host
    • racli add keystore
    • racli add management_db
    • racli add nfs
    • racli add protected_db
    • racli add ra_partner
    • racli add rasys_wallet
    • racli add remote_syslog
    • racli add replication_server
    • racli add replication_user
    • racli add replication_wallet
    • racli add storage_cells
    • racli add tag
    • racli alter admin_user
    • racli alter adr_parameter
    • racli alter appliance
    • racli alter cloud_key
    • racli alter cloud_location
    • racli alter db_user
    • racli alter db_user_profile
    • racli alter disk_group
    • racli alter keystore
    • racli alter network
    • racli alter parameter
    • racli alter passphrase
    • racli alter ra_partner
    • racli alter rasys_user
    • racli alter replication_server
    • racli alter replication_user
    • racli alter replication_wallet
    • racli approve request
    • racli begin migration
    • racli configure archived_log_grouping
    • racli configure export
    • racli configure replication_network
    • racli convert tape_to_cloud
    • racli create certificate
    • racli create protection_policy
    • racli create replication_server
    • racli delete protected_db
    • racli delete protection_policy
    • racli delete replication_server
    • racli deny request
    • racli disable
    • racli disable aide
    • racli disable archived_log_grouping
    • racli disable check
    • racli disable cloud_location
    • racli disable fips
    • racli disable keystore
    • racli disable nfs
    • racli disable rasys_user
    • racli disable root_access
    • racli disable rpc
    • racli disable selinux
    • racli disable ssh
    • racli disable sys_remote_access
    • racli enable aide
    • racli enable archived_log_grouping
    • racli enable check
    • racli enable cloud_location
    • racli enable fips
    • racli enable keystore
    • racli enable nfs
    • racli enable rasys_user
    • racli enable replication_management
    • racli enable root_access
    • racli enable rpc
    • racli enable selinux
    • racli enable ssh
    • racli enable sys_remote_access
    • racli end migration
    • racli export appliance
    • racli export trusted_certificate
    • racli grant db_access
    • racli install appliance
    • racli install okv_endpoint
    • racli list admin_user
    • racli list certificate
    • racli list check
    • racli list cloud_key
    • racli list cloud_location
    • racli list cloud_user
    • racli list compute_nodes
    • racli list db_user
    • racli list db_user_profile
    • racli list env
    • racli list export
    • racli list grid_home
    • racli list host

    • racli list ip_addr

    • racli list nfs
    • racli list okv_endpoint
    • racli list okv_util
    • racli list oracle_home
    • racli list parameter
    • racli list protected_db
    • racli list protection_policy
    • racli list ra_partner
    • racli list remote_syslog
    • racli list replication_db
    • racli list replication_server
    • racli list replication_user
    • racli list replication_wallet
    • racli list san
    • racli list scan
    • racli list scan_listener
    • racli list storage_cells
    • racli list storage_location
    • racli list tag
    • racli remove acfs
    • racli remove admin_user
    • racli remove certificate
    • racli remove cloud_key
    • racli remove cloud_location
    • racli remove cloud_user
    • racli remove db_user
    • racli remove db_user_profile
    • racli remove grid_home
    • racli remove host
    • racli remove keystore
    • racli remove nfs
    • racli remove oracle_home
    • racli remove osb_pieces
    • racli remove ra_partner
    • racli remove remote_syslog
    • racli remove replication_server
    • racli remove replication_wallet
    • racli remove tag
    • racli revoke db_access
    • racli run check
    • racli run diagnostics
    • racli run preinstall
    • racli run reconcile
    • racli start appliance
    • racli start management_db
    • racli start nfs
    • racli start replication_db
    • racli start replication_server
    • racli status aide
    • racli status appliance
    • racli status archived_log_grouping
    • racli status cloud_location
    • racli status compliance
    • racli status copyall_state
    • racli status disk_group
    • racli status fips
    • racli status keystore
    • racli status listener
    • racli status migration
    • racli status nfs
    • racli status okv_endpoint
    • racli status replication_network
    • racli status replication_server
    • racli status replication_user
    • racli status request
    • racli status scan
    • racli status scan_listener
    • racli status selinux
    • racli stop appliance
    • racli stop management_db
    • racli stop nfs
    • racli stop replication_db
    • racli stop replication_server
    • racli uninstall appliance
    • racli uninstall okv_endpoint
    • racli update aide
    • racli update appliance
    • racli update parameter
    • racli update replication_server
    • racli update ssh_keys
    • racli update ssh_known_hosts
    • racli update storage_location
    • racli update support_tools
    • racli version
• Part V Cabling Information for Oracle Zero Data Loss Recovery Appliance
  • Cable Color Coding
  • In-Rack Cabling Tables for Recovery Appliance RA26
    • Recovery Appliance RA26 Rack Layout
    • Oracle Integrated Lights Out Manager Cabling Connections RA26
    • Administrative Ethernet Port Cabling Tables RA26
    • Single-Phase Power Distribution Unit Cabling Connections RA26
    • Three-Phase Power Distribution Unit Cabling Connections RA26
    • RDMA Network Fabric Switch-to-Switch Cabling Connections RA26
    • RDMA Network Fabric Switch-to-Server Cabling Connections RA26
  • In-Rack Cabling Tables for Recovery Appliance RA23
    • Recovery Appliance RA23 Rack Layout
    • Oracle Integrated Lights Out Manager Cabling Connections RA23
    • Administrative Ethernet Port Cabling Tables RA23
    • Single-Phase Power Distribution Unit Cabling Connections RA23
    • Three-Phase Power Distribution Unit Cabling Connections RA23
    • RDMA Network Fabric Switch-to-Switch Cabling Connections RA23
    • RDMA Network Fabric Switch-to-Server Cabling Connections RA23
  • In-Rack Cabling Tables for Recovery Appliance RA21
    • Recovery Appliance RA21 Rack Layout
    • Oracle Integrated Lights Out Manager Cabling Connections RA21
    • Administrative Ethernet Port Cabling Tables RA21
    • Single-Phase Power Distribution Unit Cabling Connections RA21
    • Three-Phase Power Distribution Unit Cabling Connections RA21
    • RDMA Network Fabric Switch-to-Switch Cabling Connections RA21
    • RDMA Network Fabric Switch-to-Server Cabling Connections RA21
  • In-Rack Cabling Tables for Recovery Appliance X8M
    • Recovery Appliance RA21 and X8M Rack Layout
    • Oracle Integrated Lights Out Manager Cabling Connections X8M
    • Administrative Ethernet Port Cabling Tables X8M
    • Single-Phase Power Distribution Unit Cabling Connections X8M
    • Three-Phase Power Distribution Unit Cabling Connections X8M
    • RDMA Network Fabric Switch-to-Switch Cabling ConnectionsX8M
    • RDMA Network Fabric Switch-to-Server Cabling Connections X8M
  • In-Rack Cabling Tables for Recovery Appliance X8, X7, X6, and X5
    • Recovery Appliance X8, X7, X6, and X5 Rack Layout
    • Oracle Integrated Lights Out Manager Cabling Connections
    • Administrative Gigabit Ethernet Cabling Connections
    • Single-Phase Power Distribution Unit Cabling Connections X8
    • Single-Phase Power Distribution Unit Cabling Connections X7 and Earlier
    • Three-Phase Power Distribution Unit Cabling Connections X8
    • Three-Phase Power Distribution Unit Cabling Connections
    • RDMA Network Fabric Switch-to-Switch Cabling Connections
    • RDMA Network Fabric Switch-to-Server Cabling Connections
• Part VI Extending Oracle Zero Data Loss Recovery Appliance
  • Extending a Rack by Adding Another Rack
    • Overview of Adding Another Rack to an Existing System
    • Cabling Two Racks Together
      • Cabling Two RoCE Network Fabric Racks Together with No Down Time
        • Extending an RA21 or Later Model Rack with No Down Time by Adding Another RA21 or Later Model Rack
        • Extending an X8M Rack with No Down Time by Adding an RA21 or Later Model Rack
          • Two-Rack Cabling for a System Combining an X8M Rack and a Later Model Rack
        • Extending an X8M Rack with No Down Time by Adding Another X8M Rack
      • Cabling Two RoCE Network Fabric Racks Together with Down Time Allowed
      • Cabling Two InfiniBand Network Fabric Racks Together
    • Cabling Several Racks Together
      • Cabling Several RoCE Network Fabric Racks Together
      • Cabling Several InfiniBand Network Fabric Racks Together
  • Multi-Rack Cabling Tables for Recovery Appliance RA21 and Later Models
    • Understanding Multi-Rack Cabling for RA21 and Later Model Racks
    • Preparing for Multi-Rack Cabling with RA21 and Later Model Racks
    • Two-Rack Cabling for RA21 and Later Model Racks
    • Three-Rack Cabling for RA21 and Later Model Racks
    • Four-Rack Cabling for RA21 and Later Model Racks
    • Five-Rack Cabling for RA21 and Later Model Racks
    • Six-Rack Cabling for RA21 and Later Model Racks
    • Seven-Rack Cabling for RA21 and Later Model Racks
    • Eight-Rack Cabling for RA21 and Later Model Racks
    • Nine-Rack Cabling for RA21 and Later Model Racks
    • Ten-Rack Cabling for RA21 and Later Model Racks
    • Eleven-Rack Cabling for RA21 and Later Model Racks
    • Twelve-Rack Cabling for RA21 and Later Model Racks
    • Thirteen-Rack Cabling for RA21 and Later Model Racks
    • Fourteen-Rack Cabling for RA21 and Later Model Racks
  • Multi-Rack Cabling Tables for Recovery Appliance X8M Models
    • Understanding Multi-Rack Cabling for X8M Racks
      • Preparing for Multi-Rack Cabling with X8M Racks
      • Cabling Multiple Recovery Appliance X8M Racks
    • Two-Rack Cabling for X8M Racks
    • Three-Rack Cabling for X8M Racks
    • Four-Rack Cabling for X8M Racks
    • Five-Rack Cabling for X8M Racks
    • Six-Rack Cabling for X8M Racks
    • Seven-Rack Cabling for X8M Racks
    • Eight-Rack Cabling for X8M Racks
  • Multi-Rack Cabling Tables for ZDLRA Rack Models with InfiniBand Network Fabric (X2 to X8)
    • Understanding Multi-Rack Cabling for Racks with InfiniBand Network Fabric
      • Preparing for Multi-Rack Cabling with InfiniBand Network Fabric
      • Cabling Oracle Exadata Quarter Racks and Oracle Exadata Eighth Racks with InfiniBand Network Fabric
    • Two-Rack Cabling with InfiniBand Network Fabric
    • Three-Rack Cabling with InfiniBand Network Fabric
    • Four-Rack Cabling with InfiniBand Network Fabric
    • Five-Rack Cabling with InfiniBand Network Fabric
    • Six-Rack Cabling with InfiniBand Network Fabric
    • Seven-Rack Cabling with InfiniBand Network Fabric
    • Eight-Rack Cabling with InfiniBand Network Fabric
• Part VII Appendixes
  • Error Messages
    • Contacting Oracle Support Services
    • Generic Alert Messages: HALRT-00001 to HALRT-00500
    • Temperature Alert Messages: HALRT-00513 to HALRT-00600
    • Fan Alert Messages: HALRT-00616 to HALRT-00700
    • Power Supply/Converters Alert Messages: HALRT-00717 to HALRT-00800
    • Network Alert Messages: HALRT-00912 to HALRT-01000
    • Hard Disk and Flash Disk Alert Messages: HALRT-01015 to HALRT-01200
    • Accelerator/Controller Alert Messages: HALRT-01209 to HALRT-01300
    • Voltage Alert Messages: HALRT-01301 to HALRT-01400
    • Physical Disk Alert Messages: HALRT-01401 to HALRT-01500
    • Auto Service Request Alert Messages for Storage Servers: HALRT-02001 to HALRT-02013
    • HDD Controller Battery Alert Messages: HALRT-02101 to HALRT-02200
    • Generic Actions for Alert Messages: HALRT-10001 to HALRT-10500
    • Generic Actions for Alert Messages: HALRT-10503 to HALRT-11000
    • Generic Actions for Alert Messages: HALRT-11001 to HALRT-11100
  • Replacement Units
    • About Warranty Coverage
    • Understanding Repair Categories
    • LED Status Descriptions
      • Oracle Server LEDs
      • Sun Datacenter InfiniBand Switch 36 LEDs
    • Parts for Compute Servers
      • Database Server Components of Recovery Appliance X9M
      • Database Server Components of Recovery Appliance X8M
      • Oracle Server X8 and X8M Database Server Parts
    • Parts for Storage Servers
      • Oracle Exadata Storage Server X9M, X8M, and X8 High Capacity and Extended (XT) Server Parts
    • Parts for Cisco Switch
    • Parts for InfiniBand Switches
    • Parts for Power Distribution Units
    • Cables and Cable Accessories for Recovery Appliance
  • Oracle Zero Data Loss Recovery Appliance Software Accessibility Recommendations
    • Tips on Using Screen Readers and Braille Displays
    • Tips on Using Screen Magnifiers
    • Tips on Using Exawatcher Charts
    • Oracle Exadata Deployment Assistant (OEDA) Web interface Accessibility