Go to main content

Oracle® Rack Cabinet 1242 Power Distribution Units User's Guide

Exit Print View

Documentation Home » ... » Restoring the PDU to Factory Default Settings ... » Restore the PDU to Factory Default Settings (HTML)

Updated: March 2018

Oracle^® Rack Cabinet 1242 Power Distribution Units User's Guide

Document Information

Using This Documentation

Understanding PDUs

Confirming Facility Requirements and PDU Specifications

Preparing for Installation

Installing PDUs Into a Oracle Rack 1242 Cabinet

Connecting PDUs to the Network

Monitoring Original PDUs

Monitoring Enhanced PDUs

Understanding the Relationship Between Inputs and Outlet Groups

Relationship Between Inputs and Outlet Groups Overview

Single-Phase PDU Input and Outlet Group Relationship

Three-Phase PDU Input and Outlet Group Relationship

Access a Metering Unit on the Network (Enhanced PDU)

Set Threshold Parameter Values (Enhanced PDU)

Monitoring an Enhanced PDU

Monitor the Enhanced PDU (LCD Screen)

Monitor the Enhanced PDU (HTML Interface)

Monitor the Enhanced PDU (RS-232)

Monitor the Enhanced PDU (SSH)

Changing Interface Settings (Enhanced PDU)

Set the PDU Information (Enhanced PDU)

Add Users and Change Passwords (Enhanced PDU)

Send System Log Messages to Systems on the Network (Enhanced PDU)

Enabling and Configuring SNMP (Enhanced PDU)

Types of PDU Metering Unit SNMP Traps (Enhanced PDU)

Enable and Configure SNMP (Enhanced PDU)

Configure SNMP Traps

Verifying and Updating the Firmware (Enhanced PDU)

View Module Information (Enhanced PDU)

Update the PDU Metering Unit Firmware (HTML)

Update the PDU Metering Unit Firmware (SSH)

Administering the PDU Metering Unit (Enhanced PDU)

Reset the Enhanced PDU Metering Unit (Reset Button)

Reboot the Enhanced PDU Metering Unit (LCD)

Reboot the Enhanced PDU Metering Unit (HTML)

Reboot the Enhanced PDU Metering Unit (RS-232)

Reboot the Enhanced PDU Metering Unit (SSH)

View Status Information on the LCD Screen (Enhanced PDU)

Adjust the LCD Screen (Enhanced PDU)

Set the PDU System Time

Access the Event Logging Page

Restoring the PDU to Factory Default Settings (Enhanced PDU)

Restore the PDU to Factory Default Settings (LCD)

Restore the PDU to Factory Default Settings (HTML)

Restore the PDU to Factory Default Settings (RS-232)

Restore the PDU to Factory Default Settings (SSH)

NET MGT Port LED and Pin Descriptions

SER MGT Ports and Pin Descriptions

Understanding CLI Commands

Please tell us how to improve our documentation:

Terms of Use | Your Privacy Rights | | Ad Choices

Thank you for your feedback! If you want to participate in content improvement and share additional information, please click Feedback button.

Rate this document:

Language:

Restore the PDU to Factory Default Settings (HTML)

Log in to the PDU metering unit.
See Access a Metering Unit on the Network (Enhanced PDU).

Click on the Net Configuration link and log in as an admin user.
See Login Information.

Select StartUp/Reset heading.
Note - Screenshots with the reset functionality are from FW version 2.01. The reset functionality is not available beginning with FW version 2.02.

Click the Submit button to restore the PDU metering unit back to its default factory settings.

Copyright © 2017, 2018, Oracle and/or its affiliates. All rights reserved.