Disable Query Transmission on Topology Change

If you have enabled the transmission of MLD queries when topology changes occur in the network, you can disable the feature.

1. Restore the default value of the query transmission on topology change feature.

   SEFOS(config)# ipv6 mld snooping send-query disable
   

2. Ensure that queries will not be transmitted when a topology change occurs.

   SEFOS# show ipv6 mld snooping globals
    
   Snooping Configuration
     -----------------------------
     MLD Snooping globally enabled
     MLD Snooping is operationally enabled
     Transmit Query on Topology Change globally disabled
     Multicast forwarding mode is MAC based
     Proxy reporting globally enabled
     Router port purge interval is 125 seconds
     Port purge interval is 260 seconds
     Report forward interval is 5 seconds
     Group specific query interval is 2 seconds
     Reports are forwarded on router ports
     Group specific query retry count is 2