Configure the Group Query Interval

The group query interval default value is 2 seconds. This example changes the interval to 3 seconds.

1. Configure the group query interval.

   SEFOS# configure terminal
   SEFOS(config)# ipv6 mld snooping group-query-interval 3
   SEFOS(config)# end
   

2. View the configuration.

   SEFOS# show ipv6 mld snooping globals
    
   Snooping Configuration
   -----------------------------
   MLD Snooping globally enabled
   MLD Snooping is operationally enabled
   Multicast forwarding mode is MAC based
   Proxy reporting globally enabled
   Router port purge interval is 125 seconds
   Port purge interval is 130 seconds
   Report forward interval is 8 seconds
   Group specific query interval is 3 seconds
   Reports are forwarded on router ports
   Group specific query retry count is 2