Sun Ethernet Fabric Operating System MLDS Administration Guide

Exit Print View

Updated: July 2015
 
 

Configure the Report Forward Suppression Interval

The default report forward interval is 5 seconds. This example sets the report-forward interval to 8 seconds. MLD report messages for the same group will not get forwarded onto the router ports for 8 seconds.

  1. Configure the report-suppression interval.
    SEFOS# configure terminal
    SEFOS(config)# ipv6 mld snooping report-suppression-interval 8
    SEFOS(config)# end
    

    Only one report will be forwarded within the report forward interval of 8 seconds for a particular group.

  2. View the configuration.
    SEFOS# show ipv6 mld snooping globals
     
    Snooping Configuration
    -----------------------------
    MLD Snooping globally enabled
    MLD Snooping is operationally enabled
    Multicast forwarding mode is MAC based
    Proxy reporting globally enabled
    Router port purge interval is 125 seconds
    Port purge interval is 130 seconds
    Report forward interval is 8 seconds
    Group specific query interval is 2 seconds
    Reports are forwarded on router ports
    Group specific query retry count is 2