Configure the Snooping Version

The snooping version for a specific VLAN can be configured as either v1 or v2. By default, the operating version of the MLDS switch for all the VLANs is v2. In this example, VLAN 4 is the VLAN for which the snooping version is to be configured, and the snooping version is 1.

1. Configure the snooping version.

   SEFOS# configure terminal
   SEFOS(config)# vlan 4
   SEFOS(config-vlan)# ipv6 mld snooping version v1
   SEFOS(config-vlan)# end
   

2. View the configuration.

   SEFOS# show ipv6 mld snooping vlan 4
    
   Snooping VLAN Configuration for the VLAN 4
     MLD Snooping enabled
     MLD configured version is V1
     Fast leave is disabled
     Snooping switch is configured as Non-Querier
     Snooping switch is acting as Non-Querier
     Query interval is 125 seconds
     Port Purge Interval is 260 seconds
     Max Response Code is 10000, Time is 10 seconds