Electrical Requirements

Language:

Oracle Server X7-8 uses AC power. The following table contains the power supply specifications.

Note - The power dissipation numbers listed in the following table are the maximum rated power numbers for the power supply used in the system. The numbers are not a rating of the actual power consumption of the system. For up-to-date information on power consumption, go to the Oracle Power Calculators web site http://www.oracle.com/us/products/servers-storage/sun-power-calculators/index.html, and click the Oracle Server X7-8 link.

Parameter	Specification
Voltage (nominal)	200-240 VAC
Input current (maximum)	23A @ 200 to 240 VAC 12A max per cord
Frequency (nominal)	50/60 Hz
Maximum power consumption	Single 4-socket –1980 W Dual 4-socket – 3950 W Single 8-socket – 3880 W
Maximum heat output	13475 BTU/Hr

Your Oracle Server X7-8 can operate effectively over a range of voltages and frequencies.

Caution - The system must have a reliable power source. If the system exceeds the voltage and frequency ranges, damage to the server might occur. Electrical disturbances, such as the following, might damage the system:

Fluctuations caused by brownouts
Wide and rapid variations in input voltage levels or in input power frequency
Electrical storms
Faults in the distribution system, such as defective wiring

To protect your server from disturbances, use a dedicated power distribution system, power-conditioning equipment, and lightning arresters or power cables to protect from electrical storms.

See the following sections for additional guidelines.