5.30 rtrv-ee-card
Use this command to display Eagle Eyes Card Configuration data from the Eagle Eyes Card (EE CARD) table. The EE CARD entry consists of a Card Loc and Eagle Eyes Card specific data.
Parameters
- loc (optional)
- Eagle Eyes Card location.
- Range:
- 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
Example
rtrv-ee-card
rtrv-ee-card:loc=1102
Dependencies
The EE CARD table must be available.
2867 E2867 Cmd Rej: Unable to read EE Card table
The card location specified in the 'loc' parameter must be configured to use Eagle Eyes.
2984 E2984 Cmd Rej: Eagle Eyes not configured on the card
The Eagle Eyes Filter table must be available.
2813 E2813 Cmd Rej: Unable to read EE FLT table
Notes
None.
Output
This example displays the Eagle Eyes parameters for all the EE configured network cards.
rtrv-ee-card
tekelecstp 10-03-08 14:43:31 EST EAGLE 46.0.0
LOC THR SECLIM PKTLIM KBLIM
-----------------------------------
1101 10000 5644800 10000000 4000000
1201 1000 464400 NONE 2000000
EE CARD table is (2 of 254) 1% full
RTRV-EE-CARD: MASP A - COMPLTD
;
This example displays the Eagle Eyes parameters for the specified EE configured network card.
rtrv-ee-card:loc=1201
tekelecstp 10-03-08 14:43:31 EST EAGLE 46.0.0
EE OAM Card Configuration
-------------------------------------------
LOC THR SECLIM PKTLIM KBLIM PORT
-------------------------------------------
1201 1000 2000 2000 3000 -
ATM FILTERS
-----------------------------
ID TYPE PORT SSCOPSU MTP3SI
-----------------------------
71 INC a ctrl -
13 INC a - -
5 EXC b - -
EE CARD table is (2 of 254) 1% full
RTRV-EE-CARD: MASP A - COMPLTD
;
Legend
- LOC--- Card location as stenciled on the shelf of the system.
- THR--- The sending rate of the Eagle Eyes throttle task in IMT packets per second.
- SECLIM--- The limit on the amount of time to perform the trace, in seconds.
- PKTLIM--- The limit on the number of Ethernet frames to send.
- KBLIM--- The file size limit of the capture file created, in kilobytes.
- PORT--- Port being filtered.
- ID--- Eagle Eyes Filter ID.
- TYPE--- Eagle Eyes Filter Type.
- SSCOPSU--- SSCOP sub-protocol or SU type filter.
- MTP3SI--- MTP3 user filter.