rept-stat-ee

Use this command to generate the status report of Eagle Eyes on network cards.

Parameters

loc (optional)

Eagle Eyes Card location.

Range:: 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

Example

rept-stat-ee

rept-stat-ee:loc=1102

Dependencies

The card location specified in the 'loc' parameter must be configured to use Eagle Eyes.

2984 E2984 Cmd Rej: Eagle Eyes not configured on the card

The shelf and card must be equipped.

2144 E2144 Cmd Rej: Location invalid for hardware configuration

The specified card location must not be a reserved card location.

2376 E2376 Cmd Rej: Specified LOC is invalid

Notes

This command can be canceled using the F9 function key or the canc-cmd command. See canc-cmd for more information

Output

This example generates the Eagle Eyes status report for the specified Network Card.

rept-stat-ee:loc=1101


    tekelecstp 10-03-08 14:43:31 EST  EAGLE 46.0.0
    LOC        STATE
    ----------------
    1101       ACTIVE


    Command Completed.

This example generates the Eagle Eyes status report for all the EE configured Network Cards.

rept-stat-ee


    tekelecstp 10-03-08 14:43:31 EST  EAGLE 46.0.0
    LOC        STATE
    ----------------
    1101       ACTIVE
    1103       INACTIVE
    Command Completed.