Configure the End IP for the Address Pool

In this example, the address pool is pool 1, the network is 12.0.0.0, the mask is 255.0.0.0, and the end IP is 12.0.0.0.

1. Create the address pool.

   SEFOS# configure terminal
   SEFOS(config)# ip dhcp pool 1
   

2. Configure the network as 12.0.0.0, mask 255.0.0.0, and end IP as 12.0.0.100.

   SEFOS(dhcp-config)# network 12.0.0.0 255.0.0.0 12.0.0.100
   SEFOS(dhcp-config)# end
   

3. View the end IP value for the address pools.

   SEFOS# show ip dhcp server pools
   

   The output in switch 1 is:

   Pool Id                  	: 1
   -------------------------------------------
   Subnet                    	: 12.0.0.0
   Subnet Mask               	: 255.0.0.0
   Lease time                	: 3600 secs
   Utilization threshold    	 : 75%
   Start Ip                 	 : 12.0.0.1
   End Ip                   	 : 12.0.0.100