Configure the Boot File Name

The boot file is used by the clients to identify the boot image. In this example, the boot file name is Image.exe.

1. Specify the name of the boot file in use on switch 1.

   SEFOS# configure terminal
   SEFOS(config)# ip dhcp bootfile Image.exe
   SEFOS(config)# end
   

2. View the changes to the configuration in switch 1.

   SEFOS# show ip dhcp server information
    
   DHCP server status                         : Enable
   Send Ping Packets                          : Enable
   Debug level                                : None
   Server Address Reuse Timeout               : 10 secs
   Next Server Address                        : 12.0.0.5
   Boot file name                             : Image.exe