Disable DCB for Each Interface

This example uses port 0/21.

1. Enter Global Configuration mode.

   SEFOS# configure terminal
   SEFOS(config)# interface extreme-ethernet 0/21

2. Disable DCB.

   SEFOS(config-if)# set dcb disable

3. Exit Global Configuration mode.

   SEFOS(config-if)# end

4. View the interface DCB state after it was disabled.

   SEFOS# show interfaces extreme-ethernet 0/21 dcb mode
    
   Port                  : Ex0/21
   Show Type             : Admin State
   DCB Capable State     : off
   Priority Group (ETS)  : auto
   Priority Flow Control : auto