Skip Navigation Links | |
Exit Print View | |
![]() |
Sun Ethernet Fabric Operating System PVRST+ Administration Guide |
Topology Change and Topology Change Detection
Enable IPv6 Support and Assign IPv6 Addresses
Configure the Spanning-Tree Path Cost
Configure the Spanning-Tree portfast Setting
Configure Spanning Tree Timers
Display the Spanning Tree Status
Configure the Transmit Hold Count
Configuring Trunk and Access Ports
Configure VLANS and Display the PVRST+ Information for VLANs
If a port is configured as a point-to-point link and its port role is designated, then PVRST+ negotiates a rapid transition to the forwarding state with the other port by using a proposal-handshake agreement mechanism to ensure that the topology is loop free. By default, if the interface is full-duplex, then it is considered to have a point-to-point connection. The default setting of link type can be overridden to enable rapid transition to the forwarding state.
TOR-2 SEFOS# configure terminal TOR-2 SEFOS(config)# interface extreme-ethernet 0/1
Valid interfaces include physical interfaces and port-channel logical interfaces (port-channel port_channel_number).
TOR-2 SEFOS(config-if)# spanning-tree link-type point-to-point TOR-2 SEFOS(config-if)# end
TOR-2 SEFOS# show spanning-tree vlan 10 ------------------------------------------------------------------- Spanning-tree for VLAN 10 Root Id Priority 32778 Address 00:14:4f:6c:56:6f Cost 2000 Port Ex0/1 Hello Time 2 Sec, Max Age 20 Sec, Forward Delay 15 Sec Spanning Tree Enabled Protocol PVRST Bridge Id Priority 32778 Address 00:14:4f:6c:6e:0d Hello Time 2 sec, Max Age 20 sec, Forward Delay 15 sec Name Role State Cost Prio Type ---- ---- ----- ---- ---- ------ Ex0/1 Root Forwarding 2000 128 P2P Ex0/57 Alternate Discarding 2000 128 P2P TOR-2 SEFOS#
TOR-2 SEFOS# configure terminal TOR-2 SEFOS(config)# interface extreme-ethernet 0/1 TOR-2 SEFOS(config-if)# no spanning-tree link-type TOR-2 SEFOS(config-if)# end TOR-2 SEFOS#