Table of Contents
- Title and Copyright Information
- My Oracle Support (MOS)
- What's New in This Guide
- Acronyms
- 1 Introduction
- 2 Safety Information
- 3 General Installation Information
- 4 Frames and Shelves
-
5
Fuses and Alarm Panel
- 5.1 Fuse and Alarm Panels
- 5.2 Installing Power Cables
- 5.3 Frame Ground and Logic Ground Cabling Procedures
- 5.4 Fuse Verification
- 5.5 Verification of Fuse Alarm Function
- 5.6 FAP Alarm System Test
- 5.7 Fuse Assignments
- 5.8 Fuse and Card Locations
- 5.9 Card Locations in Control and Extension Shelves
-
6
Assemblies
- 6.1 Intra-system Cable Installation
- 6.2 E5-ENET/E5-ENET-B and Fan Option, EDCM, E5-SM4G/E5-SM8G-B Cabling
- 6.3 User Upgrade Procedures
- 6.4 Fan Assembly Installation and Cabling
- 6.5 Source Timing
- 6.6 A Clock and B Clock Cable Replacement
- 6.7 Termination of Alarm, Clock Supply, and Terminal Cables
- 6.8 Holdover Clock Installation
- 6.9 Ohms Converter International Market
- 6.10 Hardware Acceptance
- 6.11 –48VDC Power Source
-
A
LED Information
- A.1 Introduction
- A.2 CI, Clock Interface Card, Holdover Clock
- A.3 E5-ATM-B Interface Module
- A.4 E5-E1T1-B Interface Module
- A.5 E5-ENET-B Interface Module
- A.6 E5-MASP Card
- A.7 E5-MCPM-B Module
- A.8 E5-MDAL Card
- A.9 E5-SM8G-B Module
- A.10 HIPR2, High-Speed IMT Packet Router 2 Module
- A.11 MIS, Maintenance Interface System, Holdover Clock
- A.12 MCA, Matrix Controller Assembly Card, Holdover Clock
- A.13 SLIC Module
- A.14 ST3, Stratum-3 Clock Card, Holdover Clock
- A.15 TOCA, Timing Output Composite Automatic, Holdover Clock
-
B
Backplane Connectors
-
B.1
Control Shelf Connectors
- B.1.1 Control Shelf Backplane 04
- B.1.2 Control Shelf Backplane 06/07
- B.1.3 Overview of the Control Shelf Backplane Connectors
- B.1.4 Power Connectors
- B.1.5 Alarm Connectors
- B.1.6 System Clock Connectors
- B.1.7 Shelf Clock Connectors (for Control Shelf Backplane -04 only)
- B.1.8 BITS Clock Connectors
- B.1.9 Serial Port Connectors
- B.1.10 Interface Connectors
- B.1.11 Interprocessor Message Transport Connectors
- B.1.12 General Purpose Relay Connectors
- B.1.13 General Purpose Serial Interface Connectors
- B.2 Extension Shelf
-
B.1
Control Shelf Connectors
-
C
Cables and Adapters
- C.1 Labeling Cables
-
C.2
Cables and Adapters
- C.2.1 Cable and Adapter Use
- C.2.2 Alarm Cable (Holdover Clock)
- C.2.3 B-Clock Cable
- C.2.4 Crossover (CAT-5) Cable
- C.2.5 E5-ENET ADAPTER (DB26 Male-to-Dual RJ45)
- C.2.6 External Alarm Cable (Custom)
- C.2.7 Fan Power and Alarm Cable
- C.2.8 Filter Rack Alarm Cable
- C.2.9 IMT Cable High Speed
- C.2.10 Source Clock Cable (BITS/High-speed)
- C.2.11 Power Cable
- C.2.12 Row Alarm Cable
- C.2.13 Serial Interface, Terminal, and Printer Adapter
- C.2.14 Shielded Straight Through Cable (CAT-5)
- C.2.15 Switch-to-Frame Ground Cable
- C.2.16 Local Maintenance Center Cable
- C.2.17 Remote Maintenance Center Cable
- D Part Numbers