rtrv-ee-card

Use this command to display Eagle Eyes Card Configuration data from the Eagle Eyes Card (EE CARD) table. The EE CARD entry consists of a Card Loc and Eagle Eyes Card specific data.

Parameters

loc (optional)

Eagle Eyes Card location.

Range:: 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

Example

rtrv-ee-card

rtrv-ee-card:loc=1102

Dependencies

The EE CARD table must be available.

The card location specified in the 'loc' parameter must be configured to use Eagle Eyes.

The Eagle Eyes Filter table must be available.

Notes

None.

Output

This example displays the Eagle Eyes parameters for all the EE configured network cards.

rtrv-ee-card


    tekelecstp 10-03-08 14:43:31 EST  EAGLE 46.0.0
    LOC  THR   SECLIM  PKTLIM   KBLIM     
    -----------------------------------
    1101 10000 5644800 10000000 4000000
    1201 1000  464400  NONE     2000000


    EE CARD table is (2 of 254) 1% full

    RTRV-EE-CARD: MASP A - COMPLTD 
;

This example displays the Eagle Eyes parameters for the specified EE configured network card.

rtrv-ee-card:loc=1201


    tekelecstp 10-03-08 14:43:31 EST  EAGLE 46.0.0
    
    EE OAM Card Configuration
    -------------------------------------------
    LOC  THR   SECLIM   PKTLIM   KBLIM   PORT
    -------------------------------------------

    1201 1000  2000     2000     3000    -

    ATM FILTERS
    -----------------------------
    ID  TYPE PORT SSCOPSU MTP3SI
    -----------------------------
    71   INC a    ctrl    -
    13   INC a     -      -
    5    EXC b     -      -

    EE CARD table is (2 of 254) 1% full

    RTRV-EE-CARD: MASP A - COMPLTD 
;

Legend

LOC--- Card location as stenciled on the shelf of the system.
THR--- The sending rate of the Eagle Eyes throttle task in IMT packets per second.
SECLIM--- The limit on the amount of time to perform the trace, in seconds.
PKTLIM--- The limit on the number of Ethernet frames to send.
KBLIM--- The file size limit of the capture file created, in kilobytes.
PORT--- Port being filtered.
ID--- Eagle Eyes Filter ID.
TYPE--- Eagle Eyes Filter Type.
SSCOPSU--- SSCOP sub-protocol or SU type filter.
MTP3SI--- MTP3 user filter.