rept-stat-ee

Use this command to generate the status report of Eagle Eyes on network cards.

Parameters

loc (optional)

Eagle Eyes Card location.

Range:: 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

Example

rept-stat-ee

rept-stat-ee:loc=1102

Dependencies

The card location specified in the 'loc' parameter must be configured to use Eagle Eyes.

The shelf and card must be equipped.

The specified card location must not be a reserved card location.

Notes

This command can be canceled using the F9 function key or the canc-cmd command. See canc-cmd for more information

Output

This example generates the Eagle Eyes status report for the specified Network Card.

rept-stat-ee:loc=1101


    tekelecstp 10-03-08 14:43:31 EST  EAGLE 46.0.0
    LOC        STATE
    ----------------
    1101       ACTIVE


    Command Completed.

This example generates the Eagle Eyes status report for all the EE configured Network Cards.

rept-stat-ee


    tekelecstp 10-03-08 14:43:31 EST  EAGLE 46.0.0
    LOC        STATE
    ----------------
    1101       ACTIVE
    1103       INACTIVE
    Command Completed.