Install the PCIe Flyover Cable

Before installing the PCIe Flyover cable, review the rules for configuring the PCIe electrical interfaces. See Configure PCIe Electrical Interfaces Using the PCIe Flyover Cable.

Unpack the replacement PCIe Flyover cable and place it on an antistatic mat.
Connect the PCIe Flyover cable to the motherboard connector and to either the PCIe slot 6 or slot 7 PCIe electrical interface connector.

For information on which PCIe slot to connect the PCIe Flyover cable, see Configure PCIe Electrical Interfaces Using the PCIe Flyover Cable.

Plug each end of the cable into its connector until you hear an audible click.
If necessary, reinstall PCI Riser 6.
See Install a PCIe Riser.
Return the server to operation.
1. Install the top cover.
  
  See Install the Server Top Cover.
2. Return the server to the normal rack position.
  
  See Return the Server to the Normal Rack Position.
3. Reconnect the power cords to the power supplies and power on the server.
  
  See Reconnect Power and Data Cables and Power On the Server.
4. Verify that the System OK LED is lit.