Oracle^® MiniCluster S7-2 Installation Guide

Attach Tool-less Slide-Rail Assemblies

Use this procedure to attach tool-less slide-rail assemblies to the rack.

1. Orient the slide-rail assembly so that the ball-bearing track is forward and locked in place.
   

   No. Description 1 Slide-rail 2 Ball-bearing track 3 Locking mechanism

2. Starting with either the left or right side of the rack, align the rear of the slide-rail assembly against the inside of the rear rack rail, and push until the assembly locks into place with an audible click.
   
3. Align the front of the slide-rail assembly against the outside of the front rack rail, and push until the assembly locks into place with an audible click.
4. Repeat Step 1 through Step 3 to attach the slide-rail assembly to the other side of the rack.
5. Install the compute node into the slide-rail assemblies.

   See Install the Compute Node Into the Slide-Rail Assemblies.