Available to Build Calculation

The following graphic provides a use case on how available to build is calculated:

Following are the ATB values for above graphic:

• ATB value at Top Level:

  Minimum On-hand Quantity at Level 2 (L2) = 8

• ATB value at All Levels:

  ATB value of Front Parts = Minimum On-hand Quantity at Level 3 (L3) => 10

  ATB value for Bicycle Item:

  Minimum On-hand Quantity at L2 {On-hand of Frames-20, On-hand of Gear-15, [On-hand of Front Parts-8 + ATB of Front Parts-10]}

  Therefore, the ATB value for the End Assembly is 15.

For calculating the available to build, note the following:

• The quantity value provided in the graphic is on-hand quantity of an item.

• For assembly items, the item hierarchy is fetched through BOM revision.

• For kit items, the component quantity details are available on the item record. The ATB value is calculated from the on-hand quantity.

• All the on-hand quantities are considered based on the location (LOC) selected for an end assembly.

• The ATB value for an end assembly is displayed according to the base unit specified in the item record. When calculating the ATB value for components in a BOM revision, all conversions for multiple units of measure are considered.

• For a phantom item at top level or all levels, the phantom item BOM is accessed to check for item quantity and calculate ATB value.

• To calculate ATB for an item, the SuiteApp selects BOM based on the below priority:

  1. The SuiteApp prioritizes the default BOM location added for a specific item in an item record.

  2. If the default BOM location is empty for an item, the SuiteApp uses the master default BOM specified in the item record.

• The SuiteApp does not consider any BOMs with inactive revisions or expired revisions to calculate ATB.

General Notices