Setting Up an Oracle Roving Edge Device
Learn how to set up, configure, and install the Roving Edge software on a Roving Edge Device.
To display a PDF of this Roving Edge Device Setup Guide that you can save to your local computer, click: Roving Edge Device Setup Guide PDF.
Use one of the following task tables based on the Roving Edge model:
Roving Edge Device Setup Tasks
Note
These setup instructions apply to the following device models:
- Roving Edge Device Compute (shape name: RED.2.56)
- Roving Edge Device GPU (shape name: RED2.56.GPU)
- Roving Edge Device Storage (shape name: RED.2.56.STG)
- Roving Edge Device 1 (shape name: RED.GPU.1.RX1.40)
| Task | Link |
|---|---|
| 1 | Receive and Inspect the Shipment |
| 2 |
Remove the Ruggedized Case End-Caps or |
| 3 | Identify Connectors |
| 4 | Cable the Roving Edge Device |
| 5 | Set Up Terminal Emulation |
| 6 | Power On the Device |
| 7 |
or For Roving Edge Device 1 and any devices that were provisioned at Oracle, see Configure Network Parameters for a Factory Provisioned Device. |
| 8 | Unlock the Device |
Roving Edge Ultra Setup Tasks
Note
These setup instructions apply to Roving Edge Ultras:
What's next?