Receive and Inspect the Shipment

Carefully inspect the Roving Edge Device shipment before you unpack the shipment.

Important

Report any damage or concerns to Oracle using a Support Request ticket. See Creating a Support Request.

Confirm Ordering and Shipping Details

Perform these steps to gather information you can use to inspect the shipment and ensure that you received a tamper free device.

Sign in to your Oracle Cloud Infrastructure (OCI) tenancy.
From the console navigation menu, select Hybrid, then select Roving Edge Infrastructure.
Select the compartment for this device.
Select Manage Nodes.
Select the node name to display the details page, and make note of these details:
- Device request is updated to a Delivered status
- The date and time it was received
- The serial number
  Note
  
  For devices that are self-provisioned, the serial number isn't available in the node until the device has connectivity to your tenancy, as described in Set Up Connectivity to OCI. If you don't see a serial number in the node, skip this step. You're instructed to verify the serial number later during self-provisioning.

Visually inspect the device shipping container for any damage, tampering, or missing ties before opening it.
Compare the serial number that appears on all the security ties with the serial number listed for the node in your tenancy. Note: Skip this step for self-provisioned devices.

Note

On Roving Edge 2 devices, the serial number is located on the pullout card on the front of the device. See Roving Edge Device 2 – Front Panel.
Unpack and visually inspect the device for any tampering or damage.
Ensure that you've received all the shipping kit contents. See one of the following inventory sections:
- Roving Edge Device Shipment Inventory
- Roving Edge Ultra Shipment Inventory

Note

The device ships with either a ruggedized case or a rackmounting kit based on what was specified when the device node was created. See Creating a Roving Edge Infrastructure Device 1 Node.


No.	Item
1	Roving Edge Device (GPU, Compute, or Storage model)
2	One of the following: Ruggedized case Rack mounting kit with the following items: Two mounting brackets inside two slide-rails 4 M4 screws
3	USB-to-DB-9 serial cable For devices with ruggedized cases, the cable is in a pouch inside the rear of the case.
4	AC power cord For devices with ruggedized cases, the power cord is in a pouch inside the rear of the case.

What's next?

If your device is inside a ruggedized case, see Remove the Ruggedized Case End-Caps.
If the device isn't in a ruggedized case, install your device in a rack. See Mount the Device in a Rack.

Each Roving Edge Ultra includes the following items:

What's next?

For Roving Edge Ultra, see Assemble Roving Edge Ultra.