Enable PIMv6

By default, PIMv6 is disabled in the system. Enable PIMv6 in all of the routers in a network that need to support PIMv6 (for example, router A and router B in the example topology).

1. Enable PIMv6 in the router.

   SEFOS# configure terminal
   SEFOS(config)# set ip pim enable
   SEFOS(config)# set ipv6 pim enable
   SEFOS(config)# end
   

2. Review the configuration information.

   SEFOS# show ipv6 pim component
    
   PIM Component Information
   ---------------------------
   Component-Id: 1
     PIM Mode: sparse,   PIM Version: 2
     Elected BSR: ::
     Candidate RP Holdtime: 0