Set the Group Query Interval Value

1. Enter Global Configuration mode.

   SEFOS# configure terminal
   

2. Set the group query interval.

   SEFOS(config)# ip igmp snooping group-query-interval 3
   SEFOS(config)# end
   

3. Review the configuration.

   SEFOS# show ip igmp snooping globals
   Snooping Configuration
   -----------------------------
   IGMP Snooping globally enabled
   IGMP Snooping is operationally enabled
   IGMP Snooping Enhanced mode is disabled               
   Transmit Query on Topology Change globally disabled
   Multicast forwarding mode is MAC based
   Proxy globally disabled
   Proxy reporting globally enabled
   Filter is disabled
   Router port purge interval is 125 seconds
   Port purge interval is 260 seconds
   Report forward interval is 5 seconds
   Group specific query interval is 3 seconds
   Reports are forwarded on router ports
   Group specific query retry count is 2
   Multicast VLAN disabled
   Leave config level is Vlan based