Configure the IGMP Snooping Query Interval

The IGS query interval refers to the time interval during which the switch waits after sending a group-specific query to determine if hosts are still interested in a specific multicast group.

1. Enter the configure mode for the VLAN.

   SEFOS# configure terminal
   SEFOS(config)# vlan 4
   

2. Configure the query interval.

   SEFOS(config-vlan)# ip igmp snooping query-interval 60
   SEFOS(config)# end
   

3. Review the configuration.

   SEFOS# show ip igmp snooping
    
   Snooping VLAN Configuration for the VLAN 4
     IGMP Snooping enabled
     IGMP configured version is V3
     Fast leave is disabled
     Snooping switch is configured as Querier
     Snooping switch is acting as Querier
     Query interval is 60 seconds
     Port Purge Interval is 130 seconds
     Max Response Code is 100, Time is 10 seconds