Enable Debug

1. On switch 1, enter the configuration mode for the router.

   SEFOS# configure terminal
   SEFOS(config)# router rip
   SEFOS(config-router)# network 10.0.0.1
   SEFOS(config-router)# end
   

2. Enable the debug level.

   SEFOS# debug ip rip all
    
   RIP: Sending regular Update over this interface 0
   RIP: Authentication not needed for this interface, So 25 routes can be composed
   RIP: If Agg Rt added to update with metric : 3
   RIP: Sending RIP update through Port 0
   RIP: Sending regular Update over this interface 0
   RIP: Authentication not needed for this interface, So 25 routes can be composed
   RIP: If Agg Rt added to update with metric : 3
   RIP: Sending RIP update through Port 0
   RIP: Sending regular Update over this interface 0
   RIP: Authentication not needed for this interface, So 25 routes can be composed
   RIP: If Agg Rt added to update with metric : 3