| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Switch ES1-24 Configuration Guide |
Change a SEFOS User Privilege Level
Configure Network Management From the Web Interface
Configure Network Management From the CLI
Log Out of the Oracle ILOM CLI
Configuring the SEFOS Environment
Enable or Disable the Timeout for Line Connections
Configure the Default IP Address
Configure the IP Address for an Interface
Configure the Name of the Configuration File
Enable or Disable Trap Generation on an Interface
Save the Configuration to a File
Copy a Configuration File to a Remote Location
Copy a Configuration File From a Remote Location to Flash
Copy a Configuration File From One Remote Location or Flash to Another Remote Location or Flash
Copy a System Log to a Remote Location
Configuring the Switching Feature
Configuring the Routing Feature
Configure Static Unicast Route Entries
This task describes how to clear the contents of the startup configuration or set the parameters in flash to their default values.
See Connect to SEFOS.
SEFOS-1# erase startup-config
SEFOS-1# show nvram ... Config Restore Option : No restore Config Save Option : No save Auto Save : Disable ... Config Save Filename : switch.conf Config Restore Filename : switch.conf ...
The switch starts with the default configurations when you reboot the switch.
|