Go to main content

Sun Server X4-4 HTML Documentation Collection

Exit Print View

Documentation Home » Sun Server X4-4 Documentation Library » ... » Powering Off the server » Power Off the Server Using the Server OS

Updated: October 2015

Sun Server X4-4 HTML Documentation Collection

Document Information

Using This Documentation

Hardware Installation

Operating System Installation

Sun Server X4-4 Service Manual Overview

Sun Server X4-4 Overview

Troubleshooting and Diagnostics

Troubleshooting Server Component Hardware Faults

Troubleshooting With Diagnostic Tools

Attaching Devices to the Server

Servicing the Server

Component Serviceability, Locations, and Designations

Performing Electrostatic Discharge and Static Prevention Measures

Tools and Equipment

Component Filler Panels

Locating a Failed Memory Riser Card, DIMM, or CPU

Clear Hardware Fault Messages

Preparing to Service the Server

Servicing CRU Components

Servicing Storage Drives (CRU)

Servicing Fan Modules (CRU)

Servicing Power Supplies (CRU)

Servicing Memory Risers and DIMMs (CRU)

Servicing PCIe Cards and PCIe Card Filler Panels

Servicing the DVD Drive (CRU)

Replace the System Battery (CRU)

Servicing FRU Components

Servicing Processors and Heatsinks (FRU)

Replace the Fan Board (FRU)

Replace the Power Supply Backplane Board (FRU)

Replace the Disk Drive Backplane (FRU)

Servicing the SP Card (FRU)

Replace the Motherboard (FRU)

Returning the Server to Operation

Prepare the Server for Operation

(Optional) Install the Server Into the Rack

(Optional) Install Cable Management Arm

Verify Operation of Slide-Rails and CMA

Return the Server to the Normal Rack Position

Power On the Server

BIOS Setup Utility Menu Options

About the BIOS Setup Utility

Access the BIOS Setup Utility

POST and Checkpoint Codes

AMI Checkpoint Ranges

Server Specifications

Server Specifications

Please tell us how to improve our documentation:

Terms of Use | Your Privacy Rights | | Ad Choices

Thank you for your feedback! If you want to participate in content improvement and share additional information, please click Feedback button.

Rate this document:

Language:

Power Off the Server Using the Server OS

If the server OS is running, you can use the OS shutdown procedure to power off the server to standby power mode. The OS shutdown procedure provides a graceful shutdown of the server.

To power off the server, use the OS-specific shutdown procedure.

Next Steps

Copyright © 2014, 2015, Oracle and/or its affiliates. All rights reserved.