|
|
|
|
|
|
Installing BEA eLink TCP for CICS
Installing BEA eLink for Mainframe TCP for CICS (hereafter referenced as eLink TCP for CICS) consists of the following basic tasks and topics.
Preparing for Installation
Before you install eLink TCP for CICS, complete the following tasks.
Task 1: Verify System Requirements
Prior to beginning the installation, verify hardware and software requirements. For system requirements, refer to the BEA eLink for Mainframe TCP Release Notes. Ensure that your installation workstation is connected to OS/390 through TCP/IP, and is capable of running FTP.
Task 2: Check Pre-Installation Considerations
Verify that all block sizes in the supplied JCL are appropriate for the device types being used. By default, 3380 is assumed.
Installing eLink TCP for CICS
Complete the following tasks to install BEA eLink TCP for CICS.
Task 1: Allocate Temporary Data Sets
Allocate a temporary data set on OS/390 direct access storage device (DASD) for the installation job as shown in the following example.
Note: Specify either the Volume Serial parameter or the Generic Unit parameter, but not both.
Listing 3-1 Allocating the Install Data Set
Data Set Name: YOURHLQ.TEMP.INSTALL
Volume serial:nnnnn (Blank for authorized default volume)
Generic unit: (Generic group name or unit address)
Space units: TRACK (BLKS, TRKS, CYLS, KB, MB or BYTES)
Primary quantity: 1 (In above units)
Secondary quantity:1 (In above units)
Directory blocks:0 (Zero for sequential data set)
Record format: FB
Record length: 80
Block size: 6160
Expiration date: (YY/MM/DD, YYYY/MM/DD YY.DDD,
YYYY.DDD in Julian form DDDD for
retention period in days or blank)
Enter "/" to select option
Allocate Multiple Volumes
Task 2: Transfer the Installation JCL
The eLink TCP for CICS product is distributed on a single CD-ROM (with other members of the BEA eLink TCP product family). The eLink TCP for CICS distribution files are grouped under one of the following directory structures:
/cdrom/unixmf/cics directory,
/cdrom is the directory where the drive is mounted.
D:\ntmf\cics
D: is the CD-ROM drive.
FTP the file called INSTALL to the temporary data set created in the Task 1: Allocate Temporary Data Sets section. Listing 3-2 is the process for downloading the INSTALL file using FTP.
Listing 3-2 Uploading Distribution Files
% ftp os390-node-name
Connected to os390-node-name.
Name (os390-node-name:unix-id): tso-id
331 Send password please.
Password: tso-password
230 tso-id is logged on.
Remote system type is OS/390.
ftp> quot site rec=fb
ftp> quot site lr=80
ftp> put INSTALL 'data set name allocated'
200 Port request OK.
125 Storing data set 'data set name allocated'
2749 bytes sent in 0.00 seconds (555.12 Kbytes/s)
ftp> quit
221 Quit command received. Goodbye.
Task 3: Create the PDS Libraries
Tailor the JCL as required to match your installation's standards and naming conventions. Review the following items and make the necessary changes before you submit the job.
Note: This is an instream PROC; the variables are at the end of the PROC.
The INSTALL JCL includes the name BEATCPC as part of the data set name. For example.
Listing 3-3 Sample INSTALL JCL
//JDOE1 JOB (INSTALL),'J DOE',NOTIFY=&SYSUID,
// CLASS=C,MSGCLASS=X,MSGLEVEL=(1,1),TIME=1440
//*
//INSTALL PROC HLQ=, ** YOUR HIGH LEVEL QUALIFIER
// DASD=, ** DASD DEVICE TYPE
// VOLUME=, ** SERIAL NUMBER OF TARGER VOLUME
// BLKFB=6160, ** BLKSIZE FOR FIXED BLOCK FILE
//*====================================================================
//* THESE JCL WILL CREATE THE PDS FILES REQUIRED FOR
//* THE INSTALLATION OF BEA ELINK TCP FOR CICS
//*====================================================================
// PDSCNTL='CONTROL', ** 'YOURHLQ'.BEATCPC.CONTROL
// PDSINCL='INCLUDE', ** 'YOURHLQ'.BEATCPC.INCLUDE
// PDSJCL='JCL', ** 'YOURHLQ'.BEATCPC.JCL
// PDSOBJS='OBJECT', ** 'YOURHLQ'.BEATCPC.OBJECT
// PDSLKED='PLKED', ** 'YOURHLQ'.BEATCPC.PLKED
// PDSSRCE='SOURCE' ** 'YOURHLQ'.BEATCPC.SOURCE
// PDSLKED='PLKED', ** 'YOURHLQ'.BEATCPC.PLKED
// PDSSRCE='SOURCE' ** 'YOURHLQ'.BEATCPC.SOURCE
//*--------------------------------------------------------------------
//* WE RECOMMEND THAT YOU KEEP THE NODE 'BEATCPC' IN THE data set NAMES
//*--------------------------------------------------------------------
//EXEC PGM=IEFBR14
//PDSCNTL DD DSNAME=&HLQ..BEATCPC.&PDSCNTL.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=&BLKFB),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(1,1,5))
//*
//PDSJCL DD DSNAME=&HLQ..BEATCPC.&PDSJCL.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=&BLKFB),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(1,1,5))
//*
//PDSINCL DD DSNAME=&HLQ..BEATCPC.&PDSINCL.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=&BLKFB),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(1,1,5))
//*
//PDSOBJS DD DSNAME=&HLQ..BEATCPC.&PDSOBJS.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=3200),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(3,1,5))
//*
//PDSLKED DD DSNAME=&HLQ..BEATCPC.&PDSLKED.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=&BLKFB),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(3,1,5))
//*
//PDSSRCE DD DSNAME=&HLQ..BEATCPC.&PDSSRCE.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=&BLKFB),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(1,1,5))
//*
// PEND
//*--------------------------------------------------------------------
//* CUSTOMIZE THE PARAMETER ACCORDING TO YOUR INSTALLATION
//*--------------------------------------------------------------------
// EXEC PROC=INSTALL,
// DASD=3390, ** YOUR DEVICE TYPE
// VOLUME=MVS201, ** YOUR VOLUME SERIAL NUMBER
// HLQ='PRODUCTS.BEA.EAM', ** YOUR HIGH LEVEL QUALIFIER
// PDSCNTL='CONTROL', ** BEATCPC CONTROL
// PDSINCL='INCLUDE', ** BEATCPC INCLUDE
// PDSJCL='JCL', ** BEATCPC JCL
// PDSOBJS='OBJECT', ** BEATCPC OBJECT
// PDSLKED='PLKED', ** BEATCPC PLKED
// PDSSRCE='SOURCE '** BEATCPC SOURCE
Task 4: Upload the Distribution Files
Upload all the files on the distribution medium to the partitioned data sets allocated by the job INSTALL in the Task 3: Create the PDS Libraries section.
The eLink TCP for CICS distribution files are grouped under one of the following directory structures:
/cdrom/unixmf/cics
/cdrom is the directory where the drive is mounted.
D:\ntmf\cics
D: is the CD-ROM drive.
The previous directory structures include the following partitioned data sets.
Listing 3-4 Partitioned Data Sets
Listing 3-5 Uploading Distribution Files Using FTP
% ftp os390-node-name
Connected to os390-node-name.
Name (beavs:tso-id):
331 Send password please.
Password: tso-password
230 tso-id is logged on.
Remote system type is OS/390.
ftp> prompt off
Interactive mode off
ftp> quot site rec=fb
200 SITE command was accepted
ftp> quot site lr=80
200 SITE command was accepted
Upload the CONTROL files.
Note: You must set ASCII mode on.
Listing 3-6 Upload control Files
ftp> lcd /cdrom/unixmf/cics/control
Local directory now /cdrom/unixmf/cics/control
ftp> cd 'YOURHLQ.BEATCPC.CONTROL'
250 "'YOURHLQ.BEATCPC.CONTROL'" partitioned data set is working directory
ftp>ascii
200 Representation type is Ascii
ftp> mput *
local: CSDU remote: CSDU
200 Port request OK.
125 Storing data set "YOURHLQ".BEATCPC.CONTROL(CSDU)
250 Transfer completed successfully.
5740 bytes sent in 0.01 seconds (747.10 Kbytes/s)
.
.
.
Upload the JCL files.
Note: You must set ASCII mode on.
Listing 3-7 Uploading JCL Files
ftp> lcd /cdrom/unixmf/cics/jcl
Local directory now /cdrom/unixmf/cics/jcl
ftp> cd 'YOURHLQ.BEATCPC.JCL'
250 "'YOURHLQ.BEATCPC.JCL'" partitioned data set is working directory.
ftp>ascii
200 Representation type is Ascii
ftp> mput *
local: BLDVSAM remote: BLDVSAM
200 Port request OK.
125 Storing data set "YOURHLQ".BEATCPC.JCL(BLDVSAM)
250 Transfer completed successfully.
2214 bytes sent in 0.00 seconds (563.49 Kbytes/s)
.
.
.
Upload the SOURCE files.
Note: You must set ASCII mode on.
Listing 3-8 Uploading SOURCE Files
ftp> lcd /cdrom/unixmf/cics/source
Local directory now /cdrom/unixmf/cics/source
ftp> cd 'YOURHLQ.BEATCPC.SOURCE'
250 "'YOURHLQ.BEATCPC.SOURCE'" partitioned data set is working directory.
ftp>ascii
200 Representation type is Ascii
ftp> mput *
local: BEACCLN1 remote: BEACCLN1
200 Port request OK.
125 Storing data set YOURLHQ.BEATCPC.SOURCE(BEACCLN1)
250 Transfer completed successfully.
10578 bytes sent in 0.01 seconds (1013.85 Kbytes/s)
.
.
.
Upload the INCLUDE files.
Note: You must set ASCII mode on.
Listing 3-9 Uploading INCLUDE Files
ftp> ascii
ftp> lcd /cdrom/unixmf/cics/include
ftp> cd '"YOURHLQ".BEATCPC.INCLUDE'
250 "'YOURHLQ.BEATCPC.INLUDE'" partitioned data set is working directory
ftp>ascii
200 Representation type is Ascii
ftp> mput *
200 Port request OK.
125 Storing data set "YOURHLQ".BEATCPC.INCLUDE'(CLIENT)
250 Transfer completed successfully.
local: CLIENT remote: CLIENT
3736 bytes sent in 0.0081 seconds (4.5e+02 Kbytes/s)
.
.
.
Upload the OBJECT files.
Note: You must set binary mode on.
Listing 3-10 Uploading OBJECT Files
ftp> binary
200 Representation type is IMAGE.
ftp> lcd /cdrom/unixmf/cics/object
Local directory now /cdrom/unixmf/cics/object
ftp> cd 'YOURHLQ.BEATCPC.OBJECT'
250 "'YOURHLQ.BEATCPC.OBJECT'" partitioned data set is working directory.
ftp>binary
200 Representation type is Image
ftp> mput *
local: BEACFGSV remote: BEACFGSV
200 Port request OK.
125 Storing data set "YOURHLQ".BEATCPC.OBJECT(BEACFGSV)
250 Transfer completed successfully.
6240 bytes sent in 0.00 seconds (1466.96 Kbytes/s)
.
.
.
Upload the PLKED files.
Note: You must set binary mode on.
Listing 3-11 Uploading PLKED Files
ftp> binary
200 Representation type is Image
ftp> lcd /cdrom/unixmf/plked
ftp> cd '"YOURHLQ".BEATCPC.PLKED'
250 "'"YOURHLQ.BEATCPC.PLKED'" partitioned data set is working directory
ftp>binary
200 Representation type is Image
ftp> mput *
200 Port request OK.
125 Storing data set "YOURHLQ.BEATCPC.PLKED(BEACIC00)
250 Transfer completed successfully.
local: BEACIC00 remote: BEACIC00
64560 bytes sent in 0.7 seconds (90 Kbytes/s)
.
.
.
Verify that the distribution libraries were uploaded. For the listing of files that should be on your system, refer to the List of Distribution Files and Members section.
Task 5: Define the CICS VSAM Files
Define the CICS VSAM files (Connections, Requesters, Service Names, User Connection, Inbound Service).
Listing 3-12 Sample DELETE/DEFINE Control Card
DELETE YOURHLQ.BEATCPC.BEAVSVC -
CLUSTER PURGE -
DEFINE CLUSTER ( -
NAME (YOURHLQ.BEATCPC.BEAVSVC) -
SHAREOPTIONS (2 3) -
KEYS (16 0) -
CISZ (1024) -
TRACKS (5 1) -
VOLUMES (CICS01)) -
DATA ( -
RECORDSIZE (56, 56) -
NAME (YOURHLQ.BEATCPC.BEAVSVC.DATA)) -
INDEX ( _
NAME (YOURHLQ.BEATCPC.BEAVSVC.INDEX))
Change all instances of YOURHLQ.BEATCPC.BEAVSVC to a physical data set name that meets your standards. Change the TRACKS and VOLUMES parameters to appropriate values for your installation. The provided value for the TRACKS parameter works for most installations, but this value can be increased if necessary.
Note: A condition code of 8 is acceptable on DELETE steps. If you receive condition codes other than zero for DEFINE steps, you should evaluate this for potential problems.
Task 6: Verify Contents of PROCS
Before you go on to the next step, we recommend that you check the following items in PROCS CMPBC, CMPLMAP, CMPLKED, LNKIBM (IBM TCP/IP only), and LNKINT (INTERLINK TCP/IP only) in the PDS YOURHLQ.BEATCPC.JCL.
You may need to modify them to meet your standards. You will need to review the following:
Task 7: Change Resource Names (Optional)
The default names for BEA eLink TCP for CICS Mapsets, Programs, Transids, and VSAM data sets are listed in Appendix A, "Changing Resource Names." If you want to use a different naming convention, use the procedure for changing names included after each table.
Note: You must have the C 370 compiler to customize resource names.
Task 8: Define the CICS Table Entries
Note: A "COND CODE 0004" may result due to the DELETE commands for non-existent CSD objects.
Task 9: Build eLink TCP for CICS Executables
To build the executables for BEA eLink TCP for CICS, you need to complete the following tasks.
Note: LNKLIB is where your CICS region executable binary files reside.
Pre-Link/Link eLink TCP for CICS
The following sections explain the procedures for linking programs and mapsets prior to running the BEA eLink TCP for CICS product.
Note: The following sections apply for a C 370 compiler.
Linking the CICS Admin Programs
Pre-Link/Link the CICS Admin Programs (MainMenu, Connection, Requester, Outbound Service Name, Inbound Service Name, User Connection Account, Handler Configuration). In the JCL in MAKL1 (from the PDS "YOURHLQ".BEATCPC.JCL"), complete the following steps.
Note: LNKLIB is where your CICS region executable binary files reside.
Note: A "COND CODE = 004" is normal.
Linking the CICS Utility Programs
Pre-Link/Link the CICS utility Programs (Pre-Requester, Application Handler, Shutdown, and Configuration Converter). In the JCL in MAKL0 (from the PDS "YOURHLQ".BEATCPC.JCL"), complete the following steps.
Note: LNKLIB is where your CICS region executable binary files reside.
Note: A "COND CODE = 004" is normal.
Linking the CICS TCP Programs
Pre-Link/Link the CICS TCP Programs (Requester and Handler). Proceed to the appropriate section depending on the TCP/IP stack you are running.
Interlink CPT
In the JCL in MAKL2 (from the PDS "YOURHLQ".BEATCPC.JCL"), complete the following steps.
Note: LNKLIB is where your CICS region executable binary files reside.
Note: A sample entry for the configuration file for INTERLINK is located in "YOURHLQ".BEATCPC.SOURCE(T09CONFG).
IBM TCP/IP
In the JCL in MAKL3 (from the PDS "YOURHLQ".BEATCPC.JCL"), complete the following steps.
Note: LNKLIB is where your CICS region executable binary file resides.
Note: A "COND CODE = 004" is normal.
Linking without the C 370 Compiler
If you do NOT have the C 370 compiler, use the following procedure to Linkedit the PreLinked objects. Link the Prelinked objects of the following programs.
In the JCL in MAKLKED (from the PDS "YOURHLQ.BEATCPC.JCL"), complete the following steps.
Note: LNKLIB is where your CICS region executable binary file resides.
Task 10: Verify the CICS Setup
Log on to your CICS region to install and verify the components you set up for BEA eLink TCP for CICS.
This is the group name you used in CSDU
Verify the mapsets and programs
Verify the transids
Verify the VSAM files
Task 11: Assemble and Link the CICS DCT
Note: Recent releases of CICS allow this task to be with CSD instead of this method.
|
Entry |
|---|
|
BEALOG DFHDCT TYPE=SDSCI, |
|
DSCNAME=BEALOG, |
|
BLKSIZE=136, |
|
RECSIZE=132, |
|
RECFORM=VARUNB, |
|
TYPEFLE=OUTPUT, |
|
BUFNO=1 |
|
BEAL DFHDCT TYPE=EXTRA, |
|
DESTID=BEAL, |
|
DSCNAME=BEALOG |
Task 12: Modify the CICS Startup JCL
//BEALOG DD SYSOUT=*,DCB=(DSORG=PS,RECFM=V,BLKSIZE=136)
Note: If DSN statements were added to the CSDU, this step is not necessary.
The following is an example of a CICS startup JCL.
Listing 3-13 Sample CICS Startup JCL with eLink TCP additions
//CICSREG JOB
//CICSCNTL EXEC PGM=IDCAMS,REGION=1M
//SYSPRINT DD SYSOUT=*
//SYSIN DD DISP=SHR,DSN=CICS410.SYSIN(DFHRCYES)
//DTCNTL EXEC PGM=IDCAMS,REGION=1M
//SYSPRINT DD SYSOUT=*
//SYSIN DD DISP=SHR,DSN=CICS410.SYSIN(DFHRCNO)
//*
//CICS EXEC PGM=DFHSIP, REGION=32M, TIME=1439, COND=(1,NE,CICSCNTL),
// =START=COLD,SYSIN,SEC=NO,GRPLIST=ETPLIST
//STEPLIB DD DISP=SHR,DSN=CICS410.SVTSC.SDFHAUTH
// DD DISP=SHR,DSN=CICS410.SDFHAUTH
// DD DISP=SHR,DSN=MASTCAT.MQM112.SCSQAUTH
// DD DISP=SHR,DSN=COB2140.COB2CICS.MODLIB
// DD DISP=SHR,DSN=C370.SEDCLINK
// DD DISP=SHR,DSN=ADLE370.V1R3M0.SCEECICS
// DD DISP=SHR,DSN=ADLE370.V1R3M0.SCEERUN
//DFHRPL DD DISP=SHR,DSN=CICS410.SVTSC.SDFHLOAD
// DD DISP=SHR,DSN=CICS410.SDFHLOAD
// DD DISP=SHR,DSN=BEA.BEA100.BEALOAD
// DD DISP=SHR,DSN=TCPIP.V3R1.SEZALINK
// DD DISP=SHR,DSN=TCPIP.V3R1.SEZATCP
// DD DISP=SHR,DSN=MQM112.SCSQCICS
// DD DISP=SHR,DSN=MQM112.SCSQLOAD
// DD DISP=SHR,DSN=COB2140.COB2CICS
// DD DISP=SHR,DSN=MASTCAT.COB2140.COB2LIB
// DD DISP=SHR,DSN=MASTCAT.PLI230.PLILINK
// DD DISP=SHR,DSN=C370.SEDCLINK
// DD DISP=SHR,DSN=ERW121.SERWLOAD
// DD DISP=SHR,DSN=ADLE370.V1R3M0.SCEECICS
// DD DISP=SHR,DSN=ADLE370.V1R3M0.SCEERUN
//SYSIN DD DISP=SHR,DSN=CICS410.CICS.SYSIN(TCICS)
//DFHCSD DD DISP=SHR,DSN=CICS410.DFHCSD
//DFHCMACD DD DISP=SHR,DSN=CICS410.DFHCMACD
//DFHJ01A DD DISP=SHR,DSN=CICS410.CICS.DFHJ01A
//DFHJ01B DD DISP=SHR,DSN=CICS410.CICS.DFHJ01B
//DFHJ01X DD DISP=SHR,DSN=CICS410.CICS.DFHJ01X
//DFHAUXT DD DISP=SHR, DSN=CICS410.CICS.DFHAUXT,
//DFHBUXT DD DISP=SHR, DSN=CICS410.CICS.DFHBUXT,
//DFHDMPA DD DISP=SHR,DSN=CICS410.CICS.DFHDMPA
//DFHDMPB DD DISP=SHR,DSN=CICS410.CICS.DFHDMPB
//DFHRSD DD DISP=SHR,DSN=CICS410.CICS.DFHRSD
//DFHGCD DD DISP=SHR,DSN=CICS410.CICS.DFHGCD
//DFHLCD DD DISP=SHR,DSN=CICS410.CICS.DFHLCD
//DFHXRMSG DD DISP=SHR, DSN=CICS410.CNTL.CICS.DFHXRMSG
//DFHXRCTL DD DISP=SHR,DSN=CICS410.CNTL.CICS.DFHXRCTL
//DFHTEMP DD DISP=SHR,DSN=CICS410.CNTL.CICS.DFHTEMP
//DFHINTRA DD DISP=SHR,DSN=CICS410.CNTL.CICS.DFHINTRA
//DFHJACD DD DISP=SHR,DSN=CICS410.CICS.DFHJACD
//DFHJPDS DD DISP=SHR,DSN=CICS410.DFHJPDS
//DFHJOUT DD SYSOUT=(A,INTRDR)
//DFHCXRF DD SYSOUT=X
//MQMMSG DD SYSOUT=*
//LOGUSR DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=136)
//MSGUSR DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=136)
//TCPDATA DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=136)
//BEALOG DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=136) ** BEA Connect
//COUT DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=137)
//PLIMSG DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=137)
//COUT DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=137)
//SYSABEND DD SYSOUT=*
//TRACEOUT DD SYSOUT=*
//PRINTER DD SYSOUT=*,DCB=BLKSIZE=121
//*
//PRTDMPA EXEC PGM=DFHDUP, PARM=SINGLE, REGION=0M, COND=(1,NE,DTCNTL)
//STEPLIB DD DSN=CICS410.SDFHLOAD,DISP=SHR
//SYSIN DD DUMMY
//DFHDMPDS DD DISP=SHR,DSN=CICS410.CICS.DFHDMPA
//DFHTINDX DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//DFHPRINT DD SYSOUT=*
//*
//PRTDMPB EXEC PGM=DFHDUP, PARM=SINGLE, REGION=0M, COND=(1,NE,DTCNTL)
//STEPLIB DD DSN=CICS410.SDFHLOAD,DISP=SHR
//SYSIN DD DUMMY
//DFHDMPDS DD DISP=SHR,DSN=CICS410.CICS.DFHDMPB
//DFHTINDX DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//DFHPRINT DD SYSOUT=*
//*
//* PRTAUXT EXEC PGM=DFHTUP, REGION=0M, COND=(1,NE,DTCNTL)
//* STEPLIB DD DSN=CICS410.SDFHLOAD,DISP=SHR
//* DFHAUXT DD DISP=OLD,DSN=CICS410.CICS.DFHAUXT
//* DFHAXPRT DD SYSOUT=*
//* DFHAXPRM DD DUMMY
//*
//PRTBUXT EXEC PGM=DFHTUP, REGION=0M, COND=(1,NE,DTCNTL)
//STEPLIB DD DSN=CICS410.SDFHLOAD,DISP=SHR
//DFHAUXT DD DISP=SHR,DSN=CICS410.CICS.DFHBUXT
//DFHAXPRT DD SYSOUT=*
//DFHAXPRM DD DUMMY
List of Distribution Files and Members
The following tables list and describe the members that make up each distribution partitioned data set.
BEATCPC.DIST.CONTROL
Verify that the following members are installed by BEA eLink TCP for CICS.
BEATCPC.DIST.JCL
Verify that the following members are installed by BEA eLink TCP for CICS.
BEATCPC.DIST.SOURCE
Verify that the following members are installed by BEA eLink TCP for CICS.
BEATCPC.DIST.INCLUDE
Verify that the following members are installed by BEA eLink TCP for CICS.
BEATCPC.DIST.PLKED
Verify that the following members are installed by BEA eLink TCP for CICS.
BEATCPC.DIST.OBJECT
Verify that the following members are installed by BEA eLink TCP for CICS:
|
|
|
|
|
|
Copyright © 2001 BEA Systems, Inc. All rights reserved.
|