BEA Home | Events | Solutions | Partners | Products | Services | Download | Developer Center | WebSUPPORT
http://www.oracle.com/technology/documentation/index.html | Search | PDF Files | Contact | Glossary
eLink Adapter for Mainframe Documentation | eLink Adapter for Mainframe CRM Administration Guide | Previous Topic | Next Topic | Contents | Index
CRM Error Messages
The following Communications Resource Manager (CRM) messages can be displayed in the Tuxedo console window.
9001:ERROR
<taskname> timed out with failCode <failcode>
DESCRIPTION
A conversation has timed out in the CRM with the stack return code of <failcode>. A timer event set to watch a conversation has expired.
<taskname> may appear as:
OB-Conversation #nn (<linkref>) tx #m <tranname>, or
IB-Conversation #nn (<linkref>) tx #m <tranname>
where:
nn is an internal APPC conversation number and m is the transaction context where -1 signifies non-transactional.
Outbound Conversation nnnn Link (<linkref>) TCTXT (tctxt) Tran(<tranname>), or
Inbound Conversation nnnn Link (<linkref>) TCTXT (tctxt) Tran(<tranname>)
where
nnnn is the CRM Logical Task Number and tctxt is the transaction context, where FFFFFFFF indicates notn-transactional.
ACTION
Examine stderr and the ULOG for additional information concerning the failure.
9002:ERROR
Unable to create APPC Server for %s.
CRM was unable to instantiate the stack object due to an error.
Check for additional messages in stderr. The shared library for the stack or the stack interface might not have been loaded due to an incorrect library path.
9003:ERROR
Server Failed (<stackref>), Code = <returncode>
CRM received a bad return code from the stack start-up.
The <returncode> is the value returned by the SNA Stack software. Check the status of the stack, the configuration of the stack, and the gateway configuration.
Note: Unless you started the CRM as a Tuxedo server, you must manually kill the CRM process.
9004:ERROR
Configuration change on link <linkref> requires cold start
Attempting to do a warm start after changing the domain configuration.
Change start type to COLD and restart.
9005:WARNING
Unrecovered transaction, TCTXT(%s), blob dropped. Transaction presumed forgotten.
An attempt was make by Tuxedo to recover the specified transaction that was unknown by the CRM. It is presumed that it was already committed or aborted prior to the recovery attempt.
None. This message is for information only.
9006:ERROR
Unable to start the recovery task for link <linkref>
An error occurred during the warm start of Tuxedo.
Cold start the Tuxedo application.
9008:WARNING
Unknown tranid dropped, id=<tctxt>
Recovery was requested by Tuxedo on a transaction that was already forgotten by the CRM.
9009:ERROR
No blob with recovery request. Transaction dropped, id=<tctxt>
Attempting to warm start after the CRM's BLOBLOG has been modified.
9010:ERROR
<taskname> failed with failCode <failcode>
A conversation has failed with the stack return code of <failcode>.
Outbound Conversation nnnn Link <linkref> TCTXT (<tctxt>) Tran <tranname>, or
Inbound Conversation nnnn Link <linkref> TCTXT (<tctxt>) Tran <tranname>,
nnnn is the CRM Logical TAsk Number.
tctxt is the transaction context where FFFFFFFF signifies non-transactional.
Possible values for the <failcode> are:
Communications - unable to create the APPCserver object.
MemoryAllocation - internal error allocating memory.
InvalidObject - a CRM object could not be created or has been made invalid by some previous error.
InputOutput - error occurred during file I/O or an unexpected APPC return code was received.
Registration - internal task cannot be registered.
Examine stderr and the ULOG for additional information concerning the failure. For failcode Input/Output, verify that the user starting the CRM process has the proper file permissions for the BLOBLOG and RSTRTLOG. If no apparent error is found, contact BEA Customer Support.
9011:ERROR
Attempt to connect as second master refused!
A second GWSNAX is attempting to connect to the CRM as a master gateway. Only one master gateway is allowed.
Ensure that multiple Tuxedo configurations do not use the same CRM address.
9012:ERROR
Attempt to connect as master in autonomous mode refused!
An attempt to connect to the CRM as a master gateway was made when the CRM was running in autonomous mode.
9013:ERROR
Attempt to connect with incorrect group name (<groupname>) refused!
The group name in the gateway configuration file does not match the group name specified in the CRM command line.
Correct the group name that is in error and restart.
9014:ERROR
INTERNAL ERROR: memory allocation failed [for new context/data buffer]
Internal error allocating memory. No more memory.
Contact BEA Customer Support.
9015:ERROR
INTERNAL ERROR: server registration failed
Internal error registering the APPC server. APPC libraries not found. The stack failed.
9016:ERROR
Link refers to undefined APPC stack (<stackref>)!
The stackref in the link configuration is incorrect.
Correct the stackref that is in error, run dmloadcf, and restart.
9017:ERROR
INTERNAL ERROR: link registration failed
Internal error registering the link. The stack failed.
9018:ERROR
Invalid Transition <additional information>
An internal state table failure has occurred. The <additional information> will be one of the following:
From <oldstate> to <newstate> for <dir>-bound transaction TCTXT<tid>
To <newstate> for inbound transaction TCTXT<tid>
To <newstate> for outbound transaction TCTXT<tid>
9019:ERROR
Unknown Service Correlator = <correlator>, message dropped
Internal error assigning service correlator values. Message context lost.
9020:ERROR
Duplicate Service Correlator = <correlator>
Internal error assigning service correlator values.
9021:ERROR
Invalid Remote Link Name <linkref>
The remote link name in a request does not match any defined link name.
Correct the gateway configuration and restart.
9022:ERROR
Invalid transaction context = <tctxt>
Internal error assigning transaction context values. Bad transaction.
9023:ERROR
9024:ERROR
Invalid initial syncpoint received from subordinate, TCTXT(%s)
Syncpoint processing protocol violation. Subordinate member of conversation attempted to initiate a syncpoint. XA does not support syncpoints from subordinate members.
9025:ERROR
Invalid Input Message Discarded
Internal error, bad message sent between GWSNAX and CRM. Possibly incompatible eLink Adapter for Mainframe Gateway and CRM.
9026:ERROR
CNOS Notification Received for unknown partner <partnerLU>
Multiple instances of the CRM may be using the same local LU.
Ensure that multiple Tuxedo configurations do not use the same local LU.
9027:WARNING
Remote Stop Received for <linkref>
The remote host has issued a stop for the specified link.
None. This message for information only.
9028:WARNING
Remote Start Received for <linkref>
The remote host has issued a start for the specified link.
9029:ERROR
Undefined Remote LU on link <linkref>
The remote LU does not exist as defined.
Check the gateway configuration file and the stack configuration and correct the mis-match.
9030:ERROR
Unable to start session on link <linkref>. Reason=<reason>
Link activation failure due to SNA error.
<reason> is the description of the stack return code. Determine the cause and correct.
9031:ERROR
Unable to initialize link <linkref>. Reason=<reason>
Link initialization failure due to SNA error.
9032:ERROR
No Available Session on link <linkref> for context <correlator>
Max sessions has been exceeded.
Check session limits in gateway configuration, stack configuration, CICS or VTAM. Increase if necessary.
9033:ERROR
Requested Synclevel not supported by link <linkref> for context <correlator> (synclevel <level>)
Attempted to issue a request at sync level <level> on a link that does not support that level.
Correct application or gateway configuration.
9034:ERROR
Service Request at SyncLevel=2 Rejected on PENDING link <linkref> for context <correlator>
An attempt to start a new sync level 2 request has been received and the Link is currently processing recovery information.
Wait until recovery is complete to request sync level 2 services.
9035:ERROR
Inbound Request Transform Failed (<status>) for context <correlator>
An error has occurred while processing the CICS transform for an inbound DPL request. This normally occurs when the API entry in the gateway configuration for the local service specifies CICS instead of ATMI.
Check gateway configuration for incorrect specification of local service API entry.
9036:ERROR
Inbound Response Transform Failed (<status>) for context <correlator>
An error has occurred while processing the CICS transform for an inbound DPL response. This normally occurs when the API entry in the gateway configuration for the local service specifies CICS instead of ATMI.
9037:ERROR
Outbound Request Transform Failed (<status>) for context <correlator>
An error has occurred while processing the CICS transform for an outbound DPL request. This normally occurs when the API entry in the gateway configuration for the remote service specifies CICS instead of ATMI.
9038:ERROR
Outbound Response Transform Failed (<status>) for context <correlator>
An error has occurred while processing the CICS transform for an outbound DPL response. This normally occurs when the API entry in the gateway configuration for the remote service specifies CICS instead of ATMI.
9039:ERROR
Conversation terminated without confirm for context <correlator>
Sync level 2 conversation was terminated with out confirm.
Check application program and correct.
9040:ERROR
Inbound Confirm not supported
Host application is requesting an inbound confirm. This is not supported.
Check host application program and correct.
9041:ERROR
Inbound Confirm for multi-ISRT not supported
Host IMS application is requesting an inbound confirm and using multiple ISRT commands. This is not supported.
9043:ERROR
Missing send last from host (ATMI request/response) for context <correlator>
Host application did not issue send last during an outbound request/response service. The host application may have abended.
9044:ERROR
DPL program abended with CICS code <abendcode>, program=<progname>
The specified host DPL program has abended with the code specified.
9045:ERROR
DPL program failed with CICS rcode <eibrcode>, program=<progname>
The specified host DPL program has failed with the eibrcode specified.
9046:ERROR
Invalid combination for Service Context <correlator>, <combination>
The specified <combination> is invalid. It will be one of the following:
Sync-Level, function, and API
Function and API
Examine the gateway configuration and make corrections.
9047:ERROR
Sequence number error for Service Context <correlator>, seqno <seqno>
There has been a sequence number failure for the specified context. Context is out of sequence.
9048:ERROR
Invalid conversation task for Service Context <correlator>, task=<task>
The conversation has already been terminated.
9049:ERROR
Invalid task switch for Service Context <correlator>, from <task1> to <task2>
An internal protocol violation has occurred.
9050:ERROR
Transformer creation failed for inbound transaction <trancode>
An internal error has occurred. Possibly out of memory.
9051:ERROR
Transformer failed for inbound transaction <trancode>
An internal error has occurred. Resource name is not present. Mainframe compatibility problem.
9052:WARNING
Inter-task Message dropped (<verbname>), parm=<parm> From: <task1> to <task2>
An internal message between two tasks has been dropped.
9053:ERROR
Attempt to send <nnnnn> bytes (> 32767)
The length of a send request exceeded 32767 (including overhead).
9054:ERROR
Allocation Failure for <trancode> on <remotesysid>: <error>
An Allocation error occurred.
The reason for the failure is described by <error>. Correct problem with configuration or application.
9055:ERROR
Invalid Exchange Logs GDS variable received from <remotesysid>
The log files for the CRM have been incorrectly modified.
Run CRMLOGS to examine the CRM log file. Cold start the Tuxedo application.
9056:ERROR
Invalid cold start received from <remotesysid>. Unrecovered local transactions are pending.
Attempting to cold start host while warm starting Tuxedo.
9057:ERROR
Invalid warm start received from <remotesysid>. Unknown log name.
9058:ERROR
Invalid Compare States GDS variable received from <remotesysid>
9059:ERROR
Mixed Heuristic on link <linkref> for <unitofwork> Correlator [<correlator>]
One side has reported committed while the other side has reported aborted.
Check the ULOG for any additional messages.
9060:WARNING
Inbound Exchange Logs Rejected for <remotesysid>
Link not configured for sync level 2.
9061:WARNING
Link <linkref> not configured for sync level 2
Link specified by <linkref> is not configured for sync level 2.
9062:ERROR
Exchange Logs Rejected for <remotesysid>, Restart Type or Log Name Mismatch
9063:ERROR
Exchange Logs failed with <linkref>
An error occurred during the exchange logs process.
9064:ERROR
Invalid initial syncpoint received from subordinate, <member>
An internal error has occurred during the commit process. XA does not support syncpoints originating from subordinate members.
Contact BEA Customer Support
9069 ERROR
CRM encryption setup failed
An error has occurred while establishing link-level encryption with the CRM.
Verify that the setup of encryption on both sides of the link is correct. Verify that there are common encryption levels in the ranges specified on the process command lines. Verify that the correct encryption libraries are installed
9072 ERROR
Attempted access by unauthorized CRM client
A client has attempted to access the CRM without the proper authentication or encryption setup.
Verify that the client should have access to the CRM. Verify that encryption is set up correctly in both the CRM and the client, and that the correct security add-on packages are installed. Verify that the authentication file is set up correctly, and that both the CRM and the client have correct access privileges.
9073 ERROR
CRM authentication setup failed
An error has occurred while authenticating a CRM client.
Verify that the authentication file(s) for both the CRM and the client are set up correctly, and that both have correct access privileges. Verify that the authentication file is specified correctly on both command lines.
Copyright © 2001 BEA Systems, Inc. All rights reserved. Required browser: Netscape 4.0 or higher, or Microsoft Internet Explorer 4.0 or higher.
