Electrical Requirements

Language:

The servers use AC power. The following table contains the power supply specifications for the servers.

Note - The power dissipation numbers listed in the following table are the maximum rated power numbers for the power supply used in the server. The numbers are not a rating of the actual power consumption of the server. For up-to-date information about power consumption, go to the Oracle Power Calculators web site: https://www.oracle.com/it-infrastructure/power-calculators/, and click the Oracle Server X7-2 or Oracle Server X7-2L link.

Parameter	Specification
Voltage (nominal)	100-240 VAC
Input current (maximum)	100 to 127 VAC 10.0 A; and 200 to 240 VAC 7.0 A
Frequency (nominal)	50/60 Hz (47 to 63 Hz range)
Maximum power consumption	100 to 127 VAC 800 W; 200 to 240 VAC 1200 W
Maximum heat output	11600 BTU/Hr

The servers can operate effectively over a range of voltages and frequencies.

Caution - Servers must have a reliable power source. If the system exceeds the ranges, damage to the server might occur. Electrical disturbances, such as the following, might damage the system:

Fluctuations caused by brownouts
Wide and rapid variations in input voltage levels or in input power frequency
Electrical storms
Faults in the distribution system, such as defective wiring

To protect your server from such disturbances, use a dedicated power distribution system, power-conditioning equipment, and lightning arresters or power cables for protection from electrical storms.

See the following additional power specifications.