1. Administering Oracle WebLogic Server with Fusion Middleware Control
  2. Administration

1 Administration

This chapter describes how to use the Change Center in Oracle Enterprise Manager Fusion Middleware Control (FMWC), as well as how to record WebLogic Scripting Tool (WLST) scripts, customize table views, and additional information about using Fusion Middleware Control.

This chapter includes the following sections:

Using Fusion Middleware Control help

From the user profile menu at the top of the page, select Help to access more information about a particular console page or attribute. Select Help for This Page for detailed information about the attributes on the current page. Select How Do I? for task-based help for the current page.

Parent topic: Administration

Use the Change Center

The Change Center provides a way to lock a domain configuration so you can make changes to the configuration. Note that other edit sessions may exist in the domain that impact your edit session. See View and resolve conflicts.

When locking is enabled, you start the edit process by obtaining a lock. When you finish making changes, you save the changes. The changes do not take effect, however, until you activate them, distributing them to all server instances in the domain.

To make any changes to Oracle WebLogic Server using Fusion Middleware Control:

  1. Locate the Change Center.
  2. From the Changes menu, select Lock & Edit to lock the editable configuration hierarchy for the domain.

    This enables you to make changes using Fusion Middleware Control.

  3. Make the changes you desire on the relevant pages within Fusion Middleware Control and click Save on each page where you make a change.
  4. When you have finished making all desired changes, return to the Change Center and select Changes, then select Activate Changes.

See Configuration Options.

After you finish

Some changes you make in Fusion Middleware Control take place immediately when you activate them. Other changes require you to restart the server affected by the change. See View pending changes.

Parent topic: Administration

View edit sessions

Edit sessions help manage and coordinate configuration changes. To view edit sessions that have been started in the domain:

  1. Locate the Change Center.
  2. From the Changes menu, select Edit Sessions.

    The Edit Sessions page displays the following information:

    • Name: The name of the edit session.The name of the edit session.

    • Unactivated Changes: Returns true if there are changes saved in the pending directory or there are changes in memory. To apply these changes, activate the session.

    • Merge Needed: Returns true if another edit session activates its changes after the last activation of this edit session or after its creation but before this edit session was ever activated. It indicates that this edit session configuration is probably not the actual runtime configuration. Use the resolve method to merge changes to this configuration. If this edit session configuration was also modified, then there can be conflicts between this session and the runtime configuration. Use the resolve method to remove possible inconsistencies. See View and resolve conflicts.

    • Owned By: The current editor of the edit session. The editor owns the lock.

    • Created By: The original creator of the edit session.

    • Description: The description of the edit session configuration.

Parent topic: Use the Change Center

Manage edit sessions

Use the Edit Sessions page to create, delete, and switch edit sessions:

  1. Locate the Change Center.
  2. From the Changes menu, select Edit Sessions.
  3. To create a new edit session, click Create.

    On the Create a New Edit Session page, enter a Name, an optional Description, and click Create.

  4. To delete an edit session, select the edit session you want to delete and click Delete. You cannot delete the "default" edit session.
  5. To switch edit sessions, select the edit session you want to change to and click Switch Edit Sessions.

Parent topic: Use the Change Center

View pending changes

To view changes that you have saved, but which have not yet taken effect:

  1. Locate the Change Center.
  2. From the Changes menu, select either View Change List or View Restart Checklist.

    The Change List or Restart Checklist page is displayed.

  3. From the Change List page, you can view all changes that have been saved, but not yet activated.
  4. From the Restart Checklist page, you can view all server instances that must be restarted for configuration changes to take effect.

    To restart a server:

    In the Restart Checklist table, select the row of the server you want to restart.

    Click Restarts.

  5. Click Done.

Parent topic: Use the Change Center

View and resolve conflicts

As you make configuration changes, other edit sessions may exist in the domain that impact your edit session. If the existing changes are incompatible with yours, then you will need to resolve the conflicts before you can activate your changes or you may decide to release the configuration lock and rollback your changes.

When incompatible configuration changes exist, the Changes > View & Resolve Conflicts menu option becomes available.

To resolve conflicting configuration changes:

  1. Locate the Change Center.
  2. From the Changes menu, select View & Resolve Conflicts.

    On the View & Resolve Conflicts page, you receive a warning that conflicting changes have been made in another edit session and see a description of those changes. Also, you are given a description of the changes to the domain that will occur if you initiate a resolve operation. For more information, select Changes > View Change List.

  3. To accept the changes, click Resolve Conflicts, then select Changes > Activate Changes to save all changes to the domain.
  4. To release the configuration lock and rollback your changes, click Cancel, then select Changes > Undo All Changes.

Parent topic: Use the Change Center

Enable and disable the domain configuration lock

The Change Center provides a way to lock a domain configuration so you can make changes to the configuration while preventing other accounts from making changes during your edit session.

To enable or disable the domain configuration locking feature in a development domain:

  1. Locate the Change Center.

  2. From the Changes menu, select Preferences.

    The Change Center Preferences page is displayed.

  3. From the Change Center Preference page, select or clear the Auto-Commit Mode (Automatically Acquire Lock and Activate Changes) field to enable or disable this feature.

  4. Click OK.

To verify that domain configuration locking is enabled:

  1. Locate the Change Center.
  2. On the Changes menu, locate Auto-Commit Mode.
  3. If a blue checkmark appears next to Auto-Commit Mode, then the domain configuration lock is enabled.
  4. If there is no checkmark, then select Auto-Commit Mode to enable the domain configuration lock.

    A confirmation message is displayed on the page.

After you finish

When you enable domain configuration locking, you must use the Change Center to unlock and edit the domain configuration. See Use the Change Center.

Parent topic: Use the Change Center

Release the configuration lock

When you select Lock & Edit in the Change Center, you obtain a lock on the editable configuration hierarchy which prevents other people from making changes until you release the configuration lock.

To release the configuration lock:

  1. Locate the Change Center.
  2. From the Changes menu, select one of the following options:

    • To release the lock explicitly before you make any changes, select Release Configuration.

    • To release the lock implicitly after you save any changes, select Activate Changes or Undo All Changes.

      A confirmation message is displayed on the page indicating the configuration lock has been released.

Parent topic: Use the Change Center

Set Change Center preferences

You can specify individual Change Center preferences.

To specify preferences for the Change Center:

  1. Locate the Change Center.
  2. From the Changes menu, select Preferences.

    The Change Center Preferences page is displayed.

  3. From the Change Center Preference page, you can specify the following options:

    • Activation Timeout

    • Warn User Before Taking Lock

    • Auto-Commit Mode (Automatically Acquire Lock and Activate Changes)

    • Management Operation Timeout

  4. Click OK.

    A confirmation message is displayed on the page.

Parent topic: Use the Change Center

Record WLST scripts

To help automate the task of configuring a domain, you can record your configuration actions in Fusion Middleware Control as a series of WebLogic Scripting Tool (WLST) commands and then use WLST to replay the commands.

WLST is a command-line scripting environment that you can use to create, manage, and monitor WebLogic Server domains.

You cannot record WLST commands for the following:

  • Changes to the security data that is maintained by a security provider. For example, you cannot record the commands to add or remove users, roles, and policies.

  • Changes to deployment plans.

  • Deployment operations: deploy, redeploy, undeploy, start, stop.

  • Runtime operations found on Control or Monitoring pages, such as starting and stopping applications or server instances.

See Configuration Options.

This section includes the following tasks:

Parent topic: Administration

Start WLST recording

You can only record actions that modify a domain's configuration document. See Record WLST scripts.

To start recording your Fusion Middleware Control actions as WLST commands:

  1. Locate the Change Center.
  2. From the Recording menu, select Start Recording.

    A confirmation message is displayed on the page.

After you finish

Fusion Middleware Control starts recording all actions that change the domain's configuration. As it records each command, it writes the command to the script file that you specified in your recording preferences. See Set WLST recording preferences.

Parent topic: Record WLST scripts

Stop WLST recording

To stop recording your Fusion Middleware Control actions as WLST commands:

  1. Locate the Change Center.
  2. From the Recording menu, select Stop Recording.

    A confirmation message is displayed on the page indicating that Fusion Middleware Control has stopped recording your actions.

Parent topic: Record WLST scripts

View recorded commands

To view the commands that have been recorded in your script file:

  1. Locate the Change Center.
  2. From the Recording menu, select View Recording.

    The View Recording page shows the commands that have been recorded into the script file in the current and previous recording sessions.

    You cannot edit the commands that are displayed on this page. Instead, you can use a text editor to edit the commands in the script file.

  3. Click OK.

Parent topic: Record WLST scripts

Set WLST recording preferences

You can specify individual preferences for WLST recording.

To set preferences for recording WLST scripts:

  1. Locate the Change Center.
  2. From the Recording menu, select Preferences.

    The Set Preferences for WLST Recording page is displayed.

  3. From the Set Preferences for WLST Recording page, you can specify the following options:

    • Base Script Directory

    • Script File Name

    • Append to File

    • Prompt Before Start Recording

    • Generate Prescript and Postscript

    • Prescript Text

    • Postscript Text

  4. Click OK.

Parent topic: Record WLST scripts

Set Auto-Refresh interval

You can specify the following automatic page refreshing intervals using the Auto-Refresh list in the upper right corner of the console:

  • Off—default

  • 15 seconds

  • 30 seconds

  • 1 minute

  • 5 minutes

Alternatively, you can manually refresh any console page by clicking the Refresh icon.
Small circular arrow icon.

Parent topic: Administration

Customize table views

You can customize tables in Fusion Middleware Control by sorting and filtering the data displayed and managing columns.

To customize a table view:

  1. To add or remove table columns:

    1. Above the table, select View, then select Manage Columns.

    2. Add columns to display by moving them from the list of Hidden Columns (on the left) to Visible Columns (on the right).

    3. Remove columns displayed by moving them from the list of Visible Columns to the list of Hidden Columns.

    4. Click OK.

  2. To reorder table columns:

    1. Above the table, select View, then select Reorder Columns.

    2. Select a column and use the arrows on the right to reorder the columns.

    3. Click OK.

  3. To filter the data that appears in a table:

    1. Select the column for which you want to filter data.

    2. Above the column, specify filtering criteria in the text box.

      Note:

      Some columns provide a menu with filtering criteria instead of a text box.

      The table displays only the filtered data. Click the eraser icon to remove all filters.

  4. To sort the data that appears in a table:

    1. Above the table, select View, then select Sort.

    2. Select Advanced.

    3. From the Advanced Sort page, you can sort individual columns by ascending or descending order.

    4. Click OK.

Parent topic: Administration

Filter tables using Query by Example

You can perform a query on tables in Fusion Middleware Control to filter information.

To use the Query by Example capability for tables:

  1. Above the table you want to filter, select View, then select Query by Example.

    If Query by Example is enabled, then a row of text boxes and menus is displayed above the header row of the table.

  2. Select any row in the table to add information to the query row.
  3. To filter table information using text, add a text string to the text box above the column you want to query, and press Enter.

    To filter other table information, select a one of the available options from one of the provided menus above the column you want to query.

  4. To clear queries, click the pencil eraser icon in the upper left hand corner of the table.

Parent topic: Administration