1. Upgrading Oracle Internet Directory
  2. In-Place Upgrade of Oracle Internet Directory
  3. Upgrading Oracle Internet Directory Single Node 12c Environments

3 Upgrading Oracle Internet Directory Single Node 12c Environments

You can upgrade Oracle Internet Directory from an earlier Oracle Fusion Middleware 12c (12.2.1.4.0) version to the latest 14c (14.1.2.1.0) release version.

The following topics describe how to upgrade Oracle Internet Directory to 14c (14.1.2.1.0) release:

  • About the Oracle Internet Directory Upgrade Process
    Review the roadmap for an overview of the upgrade process for Oracle Internet Directory .
  • Stopping Servers and Processes
    Before you run the Upgrade Assistant to upgrade your schemas and configurations, you must stop the Administration Server, Managed Servers, Oracle Internet Directory instances, processes, and the Node Managers.
  • Uninstalling the Software
    Follow the instructions in this section to start the Uninstall Wizard and remove the software.
  • Installing Oracle Internet Directory
    Before beginning your upgrade, download Oracle Fusion Middleware Infrastructure and Oracle Internet Directory (OID) 14c (14.1.2.1.0) distributions on the target system and install them using Oracle Universal Installer.
  • Running a Pre-Upgrade Readiness Check
    To identify potential issues with the upgrade, Oracle recommends that you run a readiness check before you start the upgrade process. Be aware that the readiness check may not be able to discover all potential issues with your upgrade. An upgrade may still fail, even if the readiness check reports success.
  • Creating the Required Schemas
    When upgrading, you must create the required schemas. You can use the Repository Creation Utility (RCU) to create customized schemas or, optionally, you can use the Upgrade Assistant to create schemas using the default schema settings. This procedure describes how to create schemas using the RCU. Information about using the Upgrade Assistant to create schemas is covered in the upgrade procedures.
  • Upgrading Product Schemas
    After stopping servers and processes, use the Upgrade Assistant to upgrade your 12.2.1.4.0 schemas to the 14c (14.1.2.1.0) release of Oracle Fusion Middleware.
  • Reconfiguring the Domain
    Run the Reconfiguration Wizard to reconfigure your domain component configurations to 14c (14.1.2.1.0).
  • Upgrading Domain Component Configurations
    After reconfiguring the domain, use the Upgrade Assistant again to upgrade the domain component configurations inside the domain to match the updated domain configuration.
  • Starting Servers and Processes
    After a successful upgrade, restart all processes and servers, including the Administration Server and any Managed Servers.
  • Creating SSL Wallet in 14c (14.1.2.1.0)
    Oracle Internet Directory (OID) server in 12c does not support certificates signed with MD5 signatures.
  • Accessing the New Oracle Directory Services Manager Console
    The Oracle Directory Services Manager (ODSM) console URL is changed in 14c (14.1.2.1.0).

Parent topic: In-Place Upgrade of Oracle Internet Directory

About the Oracle Internet Directory Upgrade Process

Review the roadmap for an overview of the upgrade process for Oracle Internet Directory .

Caution:

Before upgrading to Oracle Internet Directory 14c (14.1.2.1.0) release, ensure that the 12c (12.2.1.4.0) EXISTING_DOMAIN_HOME is outside the MIDDLEWARE_HOME.

The steps you take to upgrade your existing domain will vary depending on how your domain is configured and which components are being upgraded. Follow only those steps that are applicable to your deployment.

Table 3-1 Tasks for Upgrading Oracle Internet Directory

Task Description

Required

If you have not done so already, review the introductory topics in this guide and complete the required pre-upgrade tasks.

See:

Required

Stop all servers and processes in the 12c (12.2.1.4.0) environment. This includes Administration Server, Managed Servers, OID Servers, Node Manager, and any other system components.

WARNING: Failure to shut down your servers during an upgrade may lead to data corruption.

See Stopping Servers and Processes.

Required

In the case of a collocated installation, uninstall Oracle Fusion Middleware Infrastructure and Oracle Internet Directory 12c (12.2.1.4.0) from the existing Oracle home.

For a standalone installation, uninstall Oracle Internet Directory 12c (12.2.1.4.0) from the existing Oracle home.

See Uninstalling the Software.

Required

For a standalone installation, install Oracle Internet Directory 14c (14.1.2.1.0) in the existing Oracle home. Additionally, you should also apply patch 32577294.

For collocated deployments, install both Oracle Fusion Middleware Infrastructure and Oracle Internet Directory 14c (14.1.2.1.0) in the existing Oracle home.

See Installing Oracle Internet Directory.

Optional

Run a pre-upgrade readiness check

See Running a Pre-Upgrade Readiness Check.

Required

Start the Upgrade Assistant to upgrade the 12c (12.2.1.4.0) database schemas.

See Upgrading Product Schemas.

The upgrade of active instance data is started automatically when running the Upgrade Assistant. Once the data is successfully upgraded to the new 14c (14.1.2.1.0) environment, you can close the Upgrade Assistant. The closed instances will continue to upgrade through a background process.

Start the Reconfiguration Wizard to reconfigure the domain.

See Reconfiguring the Domain.

Start the Upgrade Assistant (again) to upgrade Oracle Internet Directory domain component configurations.

See Upgrading Domain Component Configurations.

Required

Start the servers and system components.

When the upgrade process is complete, restart the 14c (14.1.2.1.0) instance.

See Starting Servers and Processes.

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

Stopping Servers and Processes

Before you run the Upgrade Assistant to upgrade your schemas and configurations, you must stop the Administration Server, Managed Servers, Oracle Internet Directory instances, processes, and the Node Managers.

An Oracle Fusion Middleware environment can consist of an Oracle WebLogic Server domain, an Administration Server, multiple managed servers, Java components, system components such as Identity Management components, and a database used as a repository for metadata. The components may be dependent on each other, so they must be stopped in the correct order.

Note:

The procedures in this section describe how to stop the existing, pre-upgrade servers and processes using the WLST command-line utility or a script. You can also use the Oracle Fusion Middleware Control and the Oracle WebLogic Server Remote Console. See Starting and Stopping Administration and Managed Servers and Node Manager.

As of release 14c (14.1.2.0.0), the WebLogic Server Administration Console has been removed. For comparable functionality, you should use the WebLogic Remote Console. For more information, see Oracle WebLogic Remote Console.

To stop your pre-upgrade Fusion Middleware environment, navigate to the pre-upgrade domain and follow the steps below.

Step 1: Stop the Managed Servers

To stop a WebLogic Server Managed Server, use the stopManagedWebLogic script:

  • (UNIX) EXISTING_DOMAIN_HOME/bin/stopManagedWebLogic.sh managed_server_name admin_url

  • (Windows) EXISTING_DOMAIN_HOME\bin\stopManagedWebLogic.cmd managed_server_name admin_url

When prompted, enter your user name and password.

Step 2: Stop Oracle Internet Directory Servers

Stop the Oracle Internet Directory servers using the following command:

  • (UNIX) DOMAIN_HOME/bin/stopComponent.sh oid1

  • (Windows) DOMAIN_HOME\bin\stopComponent.cmd oid1

Step 3: Stop the Administration Server

When you stop the Administration Server, you also stop the processes running in the Administration Server, including the WebLogic Server Administration Console and Fusion Middleware Control.

To stop the Administration Server, use the stopWebLogic script:

  • (UNIX) EXISTING_DOMAIN_HOME/bin/stopWebLogic.sh

  • (Windows) EXISTING_DOMAIN_HOME\bin\stopWebLogic.cmd

When prompted, enter your user name, password, and the URL of the Administration Server.

Step 4: Stop Node Manager

To stop Node Manager, close the command shell in which it is running.

Alternatively, after having set the nodemanager.properties attribute QuitEnabled to true (the default is false), you can use WLST to connect to Node Manager and shut it down. See stopNodeManager in WLST Command Reference for Oracle WebLogic Server.

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

Uninstalling the Software

Follow the instructions in this section to start the Uninstall Wizard and remove the software.

If you want to uninstall the product in a silent (command-line) mode, see Running the Oracle Universal Installer for Silent Uninstallation in Installing Software with the Oracle Universal Installer.

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

Starting the Uninstall Wizard

Start the Uninstall Wizard:

  1. Change to the following directory:
    (UNIX) ORACLE_HOME/oui/bin
    (Windows) ORACLE_HOME\oui\bin
  2. Enter the following command:
    (UNIX) ./deinstall.sh
    (Windows) deinstall.cmd

Parent topic: Uninstalling the Software

Selecting the Product to Uninstall

Because multiple products exist in the Oracle home, ensure that you are uninstalling the correct product.

After you run the Uninstall Wizard, the Distribution to Uninstall screen opens. From the dropdown menu, select the Oracle Internet Directory 12.2.1.3.0 product and click Uninstall. The uninstallation program shows the screens listed in Navigating the Uninstall Wizard Screens.

Run the Uninstall Wizard again to uninstall the Oracle Fusion Middleware Infrastructure. For instructions see, Uninstalling Oracle Fusion Middleware Infrastructure in Installing and Configuring the Oracle Fusion Middleware Infrastructure.

Parent topic: Uninstalling the Software

Navigating the Uninstall Wizard Screens

The Uninstall Wizard shows a series of screens to confirm the removal of the software.

If you need help on screen listed in Table 3-2, click Help on the screen.

Table 3-2 Uninstall Wizard Screens and Descriptions

Screen Description

Welcome

Introduces you to the product Uninstall Wizard.

Uninstall Summary

Shows the Oracle home directory and its contents that are uninstalled. Verify that this is the correct directory.

If you want to save these options to a response file, click Save Response File and enter the response file location and name. You can use the response file later to uninstall the product in silent (command-line) mode. See Running the Oracle Universal Installer for Silent Uninstall in Installing Software with the Oracle Universal Installer.

Click Deinstall, to begin removing the software.

Uninstall Progress

Shows the uninstallation progress.

Uninstall Complete

Appears when the uninstallation is complete. Review the information on this screen, then click Finish to close the Uninstall Wizard.

Note:

After the product is uninstalled, ensure that the ORACLE_HOME folder exists and it does not contain any files or folders. If there are any remaining files or folders in the ORACLE_HOME folder, delete them.

Parent topic: Uninstalling the Software

Installing Oracle Internet Directory

Before beginning your upgrade, download Oracle Fusion Middleware Infrastructure and Oracle Internet Directory (OID) 14c (14.1.2.1.0) distributions on the target system and install them using Oracle Universal Installer.

Note:

  • Apply the one-off ADF patch (search for Bug ID 37376076 at https://support.oracle.com) manually using OPatch to the Oracle Internet Directory 14c (14.1.2.1.0) ORACLE_HOME after installation and before domain creation. This applies only to collocated OID installations and does not apply to standalone Oracle Internet Directory 14c (14.1.2.1.0) installations.

  • Oracle Internet Directory 14c (14.1.2.1.0) should be installed in the existing ORACLE_HOME location.

    For example: If 12c (12.2.1.4.0) is installed in ORACLE_HOME: /u01/oid/12c, uninstall 12c (12.2.1.4.0) ORACLE_HOME and install Oracle Internet Directory 14c (14.1.2.1.0) into /u01/oid/12c.

To install the 14c (14.1.2.1.0) distributions:

  1. Sign in to the target system.
  2. Download the following from Oracle Technology Network or Oracle Software Delivery Cloud to your target system:
    • Oracle Fusion Middleware Infrastructure (fmw_14.1.2.0.0_infrastructure.jar)
    • Oracle Internet Directory (UNIX: fmw_12.2.1.3.0_oid_<platform>.bin), (Windows: fmw_12.2.1.3.0_oid_win64.exe)
  3. Change to the directory where you downloaded the product distribution
  4. Start the installation program for Oracle Fusion Middleware Infrastructure:
    • (UNIX) JDK_HOME/bin/java -jar fmw_14.1.2.0.0_infrastructure.jar
    • (Windows) JDK_HOME\bin\java -jar fmw_14.1.2.0.0_infrastructure.jar
  5. On UNIX operating systems, the Installation Inventory Setup screen is displayed.
    If prompted, specify the location where you want to create your central inventory. Make sure that the operating system group name selected on this screen has write permissions to the central inventory location, and click Next.

    Note:

    The Installation Inventory Setup screen does not appear on Windows operating systems.
  6. On the Welcome screen, review the information to make sure that you have met all the prerequisites. Click Next.
  7. On the Auto Updates screen, select an option:

    • Skip Auto Updates: If you do not want your system to check for software updates at this time.

    • Select patches from directory: To navigate to a local directory if you downloaded patch files.

    • Search My Oracle Support for Updates: To automatically download software updates if you have a My Oracle Support account. You must enter Oracle Support credentials then click Search. To configure a proxy server for the installer to access My Oracle Support, click Proxy Settings. Click Test Connection to test the connection.

    Click Next.
  8. On the Installation Location screen, specify the location for the Oracle home directory and click Next.
    For more information about Oracle Fusion Middleware directory structure, see Understanding Directories for Installation and Configuration in Oracle Fusion Middleware Planning an Installation of Oracle Fusion Middleware.
  9. On the Installation Type screen, select the following:
    • For Infrastructure, select Fusion Middleware Infrastructure.

    Click Next.

    Note:

    The topology in this document does not include server examples. Oracle strongly recommends that you do not install examples into a production environment.
  10. The Prerequisite Checks screen analyzes the host computer to ensure that the specific operating system prerequisites have been met.
    To view the list of tasks that are verified, select View Successful Tasks. To view log details, select View Log. If any prerequisite check fails, then an error message appears at the bottom of the screen. Fix the error and click Rerun to try again. To ignore the error or the warning message and continue with the installation, click Skip (not recommended).
  11. On the Installation Summary screen, verify the installation options that you selected.
    If you want to save these options to a response file, click Save Response File and enter the response file location and name. The response file collects and stores all the information that you have entered, and enables you to perform a silent installation (from the command line) at a later time.

    Click Install to begin the installation.

  12. On the Installation Progress screen, when the progress bar displays 100%, click Finish to dismiss the installer, or click Next to see a summary.
  13. The Installation Complete screen displays the Installation Location and the Feature Sets that are installed. Review this information and click Finish to close the installer.
  14. After you have installed Oracle Fusion Middleware Infrastructure, enter the following command to start the installer for Oracle Internet Directory and repeat the steps above to navigate through the installer screens:
    (UNIX) ./fmw_12.2.1.3.0_oid_<platform>.bin
    (Windows) fmw_12.2.1.3.0_oid_win64.exe
  15. After a successful installation of 14c (14.1.2.1.0), install patches as documented in the 14c (14.1.2.1.0) Fusion Middleware Release Notes.

Note:

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

Running a Pre-Upgrade Readiness Check

To identify potential issues with the upgrade, Oracle recommends that you run a readiness check before you start the upgrade process. Be aware that the readiness check may not be able to discover all potential issues with your upgrade. An upgrade may still fail, even if the readiness check reports success.

Note:

This is applicable only for a collocated Oracle Internet Directory deployment scenario and not for a standalone deployment upgrade.

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

About Running a Pre-Upgrade Readiness Check

You can run the Upgrade Assistant in -readiness mode to detect issues before you perform the actual upgrade. You can run the readiness check in GUI mode using the Upgrade Assistant or in silent mode using a response file.

The Upgrade Assistant readiness check performs a read-only, pre-upgrade review of your Fusion Middleware schemas and WebLogic domain configurations that are at a supported starting point. The review is a read-only operation.

The readiness check generates a formatted, time-stamped readiness report so you can address potential issues before you attempt the actual upgrade. If no issues are detected, you can begin the upgrade process. Oracle recommends that you read this report thoroughly before performing an upgrade.

You can run the readiness check while your existing Oracle Fusion Middleware domain is online (while other users are actively using it) or offline.

You can run the readiness check any number of times before performing any actual upgrade. However, do not run the readiness check after an upgrade has been performed, as the report results may differ from the result of pre-upgrade readiness checks.

Note:

To prevent performance from being affected, Oracle recommends that you run the readiness check during off-peak hours.

Parent topic: Running a Pre-Upgrade Readiness Check

Starting the Upgrade Assistant in Readiness Mode

Use the -readiness parameter to start the Upgrade Assistant in readiness mode.

To perform a readiness check on your pre-upgrade environment with the Upgrade Assistant:
  1. Go to the oracle_common/upgrade/bin directory:
    • (UNIX) ORACLE_HOME/oracle_common/upgrade/bin
    • (Windows) ORACLE_HOME\oracle_common\upgrade\bin
  2. Start the Upgrade Assistant.
    • (UNIX) ./ua -readiness
    • (Windows) ua.bat -readiness

    Note:

    If the DISPLAY environment variable is not set up properly to allow for GUI mode, you may encounter the following error:
    Xlib: connection to ":1.0" refused by server
Xlib: No protocol specified

    To resolve this issue, set the DISPLAY environment variable to the system name or IP address of your local workstation, and rerun Upgrade Assistant.

    If you continue to receive these errors after setting DISPLAY, try launching another GUI tool, such as vncconfig. If you see the same errors, your DISPLAY environment variable may still not be set correctly.

    For information about other parameters that you can specify on the command line, see:

Parent topic: Running a Pre-Upgrade Readiness Check

Upgrade Assistant Parameters

When you start the Upgrade Assistant from the command line, you can specify additional parameters.

Table 3-3 Upgrade Assistant Command-Line Parameters

Parameter Required or Optional Description

-readiness

 Required for readiness checks

Note: Readiness checks cannot be performed on standalone installations (those not managed by the WebLogic Server).

Performs the upgrade readiness check without performing an actual upgrade.

Schemas and configurations are checked.

Do not use this parameter if you have specified the -examine parameter.

-threads

Optional

Identifies the number of threads available for concurrent schema upgrades or readiness checks of the schemas.

The value must be a positive integer in the range 1 to 8. The default is 4.

-response

Required for silent upgrades or silent readiness checks

Runs the Upgrade Assistant using inputs saved to a response file generated from the data that is entered when the Upgrade Assistant is run in GUI mode. Using this parameter runs the Upgrade Assistant in silent mode (without displaying Upgrade Assistant screens).

-examine

Optional

Performs the examine phase but does not perform an actual upgrade.

Do not specify this parameter if you have specified the -readiness parameter.

-logLevel attribute

Optional

Sets the logging level, specifying one of the following attributes:

  • TRACE

  • NOTIFICATION

  • WARNING

  • ERROR

  • INCIDENT_ERROR

The default logging level is NOTIFICATION.

Consider setting the -logLevel TRACE attribute to so that more information is logged. This is useful when troubleshooting a failed upgrade. The Upgrade Assistant's log files can become very large if -logLevel TRACE is used.

-logDir location

Optional

Sets the default location of upgrade log files and temporary files. You must specify an existing, writable directory where the Upgrade Assistant creates log files and temporary files.

The default locations are:

(UNIX)

ORACLE_HOME/oracle_common/upgrade/logs
ORACLE_HOME/oracle_common/upgrade/temp

(Windows)

ORACLE_HOME\oracle_common\upgrade\logs
ORACLE_HOME\oracle_common\upgrade\temp

-help

Optional

Displays all of the command-line options.

Performing a Readiness Check with the Upgrade Assistant

Navigate through the screens in the Upgrade Assistant to complete the pre-upgrade readiness check.

Readiness checks are performed only on schemas or component configurations that are at a supported upgrade starting point.
To complete the readiness check:
  1. On the Welcome screen, review information about the readiness check. Click Next.
  2. On the Readiness Check Type screen, select the readiness check that you want to perform:
    • Individually Selected Schemas allows you to select individual schemas for review before upgrade. The readiness check reports whether a schema is supported for an upgrade or where an upgrade is needed.

      When you select this option, the screen name changes to Selected Schemas.

    • Domain Based allows the Upgrade Assistant to discover and select all upgrade-eligible schemas or component configurations in the domain specified in the Domain Directory field.

      When you select this option, the screen name changes to Schemas and Configuration.

      Leave the default selection if you want the Upgrade Assistant to check all schemas and component configurations at the same time, or select a specific option:

      • Include checks for all schemas to discover and review all components that have a schema available to upgrade.

      • Include checks for all configurations to review component configurations for a managed WebLogic Server domain.

    Click Next.

  3. If you selected Individually Selected Schemas: On the Available Components screen, select the components that have a schema available to upgrade for which you want to perform a readiness check.
    If you selected Domain Based: On the Component List screen, review the list of components that are present in your domain for which you want to perform a readiness check.
    If you select a component that has dependent components, those components are automatically selected. For example, if you select Oracle Platform Security Services, Oracle Audit Services is automatically selected.

    Depending on the components you select, additional screens may display. For example, you may need to:

    • Specify the domain directory.

    • Specify schema credentials to connect to the selected schema: Database Type, DBA User Name, and DBA Password. Then click Connect.

      Note:

      Oracle database is the default database type. Make sure that you select the correct database type before you continue. If you discover that you selected the wrong database type, do not go back to this screen to change it to the correct type. Instead, close the Upgrade Assistant and restart the readiness check with the correct database type selected to ensure that the correct database type is applied to all schemas.

    • Select the Schema User Name option and specify the Schema Password.

      Note:

      The Upgrade Assistant automatically enables default credentials. If you are unable to connect, make sure that you manually enter the credentials for your schema before you continue.
    Click Next to start the readiness check.
  4. On the Readiness Summary screen, review the summary of the readiness checks that will be performed based on your selections.
    If you want to save your selections to a response file to run the Upgrade Assistant again later in response (or silent) mode, click Save Response File and provide the location and name of the response file. A silent upgrade performs exactly the same function that the Upgrade Assistant performs, but you do not have to manually enter the data again.
    For a detailed report, click View Log.
    Click Next.
  5. On the Readiness Check screen, review the status of the readiness check. The process can take several minutes.
    If you are checking multiple components, the progress of each component displays in its own progress bar in parallel.
    When the readiness check is complete, click Continue.
  6. On the End of Readiness screen, review the results of the readiness check (Readiness Success or Readiness Failure):

    • If the readiness check is successful, click View Readiness Report to review the complete report. Oracle recommends that you review the Readiness Report before you perform the actual upgrade even when the readiness check is successful. Use the Find option to search for a particular word or phrase within the report. The report also indicates where the completed Readiness Check Report file is located.

    • If the readiness check encounters an issue or error, click View Log to review the log file, identify and correct the issues, and then restart the readiness check. The log file is managed by the command-line options you set.

Parent topic: Running a Pre-Upgrade Readiness Check

Understanding the Readiness Report

After performing a readiness check for your domain, review the report to determine whether you need to take any action for a successful upgrade.

The format of the readiness report file is:

readiness<timestamp>.txt

Where, timestamp indicates the date and time of when the readiness check was run.

A readiness report contains the following information:

Table 3-4 Readiness Report Elements

Report Information Description Required Action
Overall Readiness Status: SUCCESS or FAILURE The top of the report indicates whether the readiness check passed or completed with one or more errors. If the report completed with one or more errors, search for FAIL and correct the failing issues before attempting to upgrade. You can re-run the readiness check as many times as necessary before an upgrade.

Timestamp

The date and time that the report was generated.

No action required.

Log file location

/oracle_common/upgrade/logs

The directory location of the generated log file.

No action required.
Domain Directory Displays the domain location No action required.

Readiness report location

/oracle_common/upgrade/logs

The directory location of the generated readiness report.

No action required.

Names of components that were checked

The names and versions of the components included in the check and status.

If your domain includes components that cannot be upgraded to this release, such as SOA Core Extension, do not attempt an upgrade.

Names of schemas that were checked

The names and current versions of the schemas included in the check and status.

Review the version numbers of your schemas. If your domain includes schemas that cannot be upgraded to this release, do not attempt an upgrade.

Individual Object Test Status: FAIL

The readiness check test detected an issue with a specific object.

Do not upgrade until all failed issues have been resolved.

Individual Object Test Status: PASS

The readiness check test detected no issues for the specific object.

If your readiness check report shows only the PASS status, you can upgrade your environment. Note, however, that the Readiness Check cannot detect issues with externals such as hardware or connectivity during an upgrade. You should always monitor the progress of your upgrade.

Completed Readiness Check of <Object> Status: FAILURE The readiness check detected one or more errors that must be resolved for a particular object such as a schema, an index, or datatype. Do not upgrade until all failed issues have been resolved.
Completed Readiness Check of <Object> Status: SUCCESS The readiness check test detected no issues. No action required.

Here is a sample Readiness Report file. Your report may not include all of these checks. 

Upgrade readiness check completed with one or more errors.

This readiness check report was created on Fri Aug 16 13:29:41 PDT 2019
Log file is located at: /oracle/work/middleware_latest/oracle_common/upgrade/logs/ua2019-08-16-13-23-36PM.log
Readiness Check Report File: /oracle/work/middleware_latest/oracle_common/upgrade/logs/readiness2019-08-16-13-29-41PM.txt
Domain Directory: /oracle/work/middleware_1212/user_projects/domains/jrf_domain

Starting readiness check of components.

Oracle Platform Security Services
   Starting readiness check of Oracle Platform Security Services.
     Schema User Name: DEV3_OPSS
     Database Type: Oracle Database
     Database Connect String: 
     VERSION Schema DEV3_OPSS is currently at version 12.1.2.0.0.  Readiness checks will now be performed.
   Starting schema test:  TEST_DATABASE_VERSION  Test that the database server version number is supported for upgrade
     INFO   Database product version: Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production
With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
   Completed schema test: TEST_DATABASE_VERSION --> Test that the database server version number is supported for upgrade +++ PASS
   Starting schema test:  TEST_REQUIRED_TABLES  Test that the schema contains all the required tables
   Completed schema test: TEST_REQUIRED_TABLES --> Test that the schema contains all the required tables +++ PASS
   Starting schema test:  Test that the schema does not contain any unexpected tables  TEST_UNEXPECTED_TABLES
   Completed schema test: Test that the schema does not contain any unexpected tables --> TEST_UNEXPECTED_TABLES +++ Test that the schema does not contain any unexpected tables
   Starting schema test:  TEST_ENOUGH_TABLESPACE  Test that the schema tablespaces automatically extend if full
   Completed schema test: TEST_ENOUGH_TABLESPACE --> Test that the schema tablespaces automatically extend if full +++ PASS
   Starting schema test:  TEST_USER_TABLESPACE_QUOTA  Test that tablespace quota for this user is sufficient to perform the upgrade
   Completed schema test: TEST_USER_TABLESPACE_QUOTA --> Test that tablespace quota for this user is sufficient to perform the upgrade +++ PASS
   Starting schema test:  TEST_ONLINE_TABLESPACE  Test that schema tablespaces are online
   Completed schema test: TEST_ONLINE_TABLESPACE --> Test that schema tablespaces are online +++ PASS
   Starting permissions test:  TEST_DBA_TABLE_GRANTS  Test that DBA user has privilege to view all user tables
   Completed permissions test: TEST_DBA_TABLE_GRANTS --> Test that DBA user has privilege to view all user tables +++ PASS
   Starting schema test:  SEQUENCE_TEST  Test that the Oracle Platform Security Services schema sequence and its properties are valid
   Completed schema test: SEQUENCE_TEST --> Test that the Oracle Platform Security Services schema sequence and its properties are valid +++ PASS
   Finished readiness check of Oracle Platform Security Services with status: SUCCESS.

Oracle Audit Services
   Starting readiness check of Oracle Audit Services.
     Schema User Name: DEV3_IAU
     Database Type: Oracle Database
     Database Connect String: 
     VERSION Schema DEV3_IAU is currently at version 12.1.2.0.0.  Readiness checks will now be performed.
   Starting schema test:  TEST_DATABASE_VERSION  Test that the database server version number is supported for upgrade
     INFO   Database product version: Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production
With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
   Completed schema test: TEST_DATABASE_VERSION --> Test that the database server version number is supported for upgrade +++ PASS
   Starting schema test:  TEST_REQUIRED_TABLES  Test that the schema contains all the required tables
   Completed schema test: TEST_REQUIRED_TABLES --> Test that the schema contains all the required tables +++ PASS
   Starting schema test:  TEST_UNEXPECTED_TABLES  Test that the schema does not contain any unexpected tables
   Completed schema test: TEST_UNEXPECTED_TABLES --> Test that the schema does not contain any unexpected tables +++ PASS
   Starting schema test:  TEST_ENOUGH_TABLESPACE  Test that the schema tablespaces automatically extend if full
   Completed schema test: TEST_ENOUGH_TABLESPACE --> Test that the schema tablespaces automatically extend if full +++ PASS
   Starting schema test:  TEST_USER_TABLESPACE_QUOTA  Test that tablespace quota for this user is sufficient to perform the upgrade
   Completed schema test: TEST_USER_TABLESPACE_QUOTA --> Test that tablespace quota for this user is sufficient to perform the upgrade +++ PASS
   Starting schema test:  TEST_ONLINE_TABLESPACE  Test that schema tablespaces are online
   Completed schema test: TEST_ONLINE_TABLESPACE --> Test that schema tablespaces are online +++ PASS
   Starting permissions test:  TEST_DBA_TABLE_GRANTS  Test that DBA user has privilege to view all user tables
   Completed permissions test: TEST_DBA_TABLE_GRANTS --> Test that DBA user has privilege to view all user tables +++ PASS
   Starting schema test:  TEST_MISSING_COLUMNS  Test that tables and views are not missing any required columns
   Completed schema test: TEST_MISSING_COLUMNS --> Test that tables and views are not missing any required columns +++ PASS
   Starting schema test:  TEST_UNEXPECTED_COLUMNS  Test that tables and views do not contain any unexpected columns
   Completed schema test: TEST_UNEXPECTED_COLUMNS --> Test that tables and views do not contain any unexpected columns +++ PASS
   Starting datatype test for table OIDCOMPONENT:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table OIDCOMPONENT: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table IAU_CUSTOM_01:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table IAU_CUSTOM_01: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table IAU_BASE:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table IAU_BASE: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table WS_POLICYATTACHMENT:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table WS_POLICYATTACHMENT: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table OWSM_PM_EJB:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table OWSM_PM_EJB: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table XMLPSERVER:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table XMLPSERVER: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table SOA_HCFP:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table SOA_HCFP: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting schema test:  SEQUENCE_TEST  Test that the audit schema sequence and its properties are valid
   Completed schema test: SEQUENCE_TEST --> Test that the audit schema sequence and its properties are valid +++ PASS
   Starting schema test:  SYNONYMS_TEST  Test that the audit schema required synonyms are present
   Completed schema test: SYNONYMS_TEST --> Test that the audit schema required synonyms are present +++ PASS
   Finished readiness check of Oracle Audit Services with status: FAILURE.

Common Infrastructure Services
   Starting readiness check of Common Infrastructure Services.
     Schema User Name: DEV3_STB
     Database Type: Oracle Database
     Database Connect String: 
   Starting schema test:  TEST_REQUIRED_TABLES  Test that the schema contains all the required tables
   Completed schema test: TEST_REQUIRED_TABLES --> Test that the schema contains all the required tables +++ PASS
   Completed schema test: ALL_TABLES --> TEST_REQUIRED_TABLES +++ Test that the schema contains all the required tables
   Starting schema test:  TEST_UNEXPECTED_TABLES  Test that the schema does not contain any unexpected tables
   Completed schema test: ALL_TABLES --> TEST_UNEXPECTED_TABLES +++ Test that the schema does not contain any unexpected tables
   Starting schema test:  TEST_REQUIRED_VIEWS  Test that the schema contains all the required database views
   Completed schema test: ALL_TABLES --> TEST_REQUIRED_VIEWS +++ Test that the schema contains all the required database views
   Starting schema test:  TEST_MISSING_COLUMNS  Test that tables and views are not missing any required columns
   Completed schema test: ALL_TABLES --> TEST_MISSING_COLUMNS +++ Test that tables and views are not missing any required columns
   Starting schema test:  TEST_DATABASE_VERSION  Test that the database server version number is supported for upgrade
   Starting schema test:  TEST_DATABASE_VERSION  Test that the database server version number is supported for upgrade
     INFO   Database product version: Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production
With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
   Completed schema test: TEST_DATABASE_VERSION --> Test that the database server version number is supported for upgrade +++ PASS
   Completed schema test: ALL_TABLES --> TEST_DATABASE_VERSION +++ Test that the database server version number is supported for upgrade
   Finished readiness check of Common Infrastructure Services with status: SUCCESS.

Oracle JRF
   Starting readiness check of Oracle JRF.
   Finished readiness check of Oracle JRF with status: SUCCESS.

System Components Infrastructure
   Starting readiness check of System Components Infrastructure.
   Starting config test:  TEST_SOURCE_CONFIG  Checking the source configuration.
     INFO /oracle/work/middleware_1212/user_projects/domains/jrf_domain/opmn/topology.xml was not found. No upgrade is needed.
   Completed config test: TEST_SOURCE_CONFIG --> Checking the source configuration. +++ PASS
   Finished readiness check of System Components Infrastructure with status: ALREADY_UPGRADED.

Common Infrastructure Services
   Starting readiness check of Common Infrastructure Services.
   Starting config test:  CIEConfigPlugin.readiness.test  This tests the readiness of the domain from CIE side.
   Completed config test: CIEConfigPlugin.readiness.test --> This tests the readiness of the domain from CIE side. +++ PASS
   Finished readiness check of Common Infrastructure Services with status: SUCCESS.

Finished readiness check of components.
Here is a sample Readiness Report file. Your report may not include all of these checks. 
Upgrade readiness check completed with one or more errors.

This readiness check report was created on Tue March 30 11:15:52 EDT 2019
Log file is located at: ORACLE_HOME/oracle_common/upgrade/logs/ua2016-05-30-11-14-06AM.log
Readiness Check Report File: ORACLE_HOME/oracle_common/upgrade/logs/readiness2016-05-30-11-15-52AM.txt

Starting readiness check of components.

Oracle Metadata Services
   Starting readiness check of Oracle Metadata Services.
     Schema User Name: DEV11_MDS
     Database Type: Oracle Database
     Database Connect String: machinename@yourcompany.com
     VERSION Schema DEV11_MDS is currently at version 12.2.1.4.0.  Readiness checks will now be performed.
   Starting schema test:  TEST_REQUIRED_TABLES  Test that the schema contains all the required tables
   Completed schema test: TEST_REQUIRED_TABLES --> Test that the schema contains all the required tables +++ PASS
   Starting schema test:  TEST_REQUIRED_PROCEDURES  Test that the schema contains all the required stored procedures
     EXCEPTION     Schema is missing a required procedure: GETREPOSITORYFEATURES
   Completed schema test: TEST_REQUIRED_PROCEDURES --> Test that the schema contains all the required stored procedures +++ FAIL
   Starting schema test:  TEST_REQUIRED_VIEWS  Test that the schema contains all the required database views
   Completed schema test: TEST_REQUIRED_VIEWS --> Test that the schema contains all the required database views +++ PASS
   Starting index test for table MDS_ATTRIBUTES:  TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
   Completed index test for table MDS_ATTRIBUTES: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
   Starting index test for table MDS_COMPONENTS:  TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes
   Completed index test for table MDS_TXN_LOCKS: TEST_REQUIRED_INDEXES --> Test that the table contains all the required indexes +++ PASS
   Starting schema test:  TEST_REQUIRED_TRIGGERS  Test that the schema has all the required triggers
   Completed schema test: TEST_REQUIRED_TRIGGERS --> Test that the schema has all the required triggers +++ PASS
   Starting schema test:  TEST_MISSING_COLUMNS  Test that tables and views are not missing any required columns
   Completed schema test: TEST_MISSING_COLUMNS --> Test that tables and views are not missing any required columns +++ PASS
   Starting schema test:  TEST_UNEXPECTED_TABLES  Test that the schema does not contain any unexpected tables
   Completed schema test: TEST_UNEXPECTED_TABLES --> Test that the schema does not contain any unexpected tables +++ PASS
   Starting schema test:  TEST_UNEXPECTED_PROCEDURES  Test that the schema does not contain any unexpected stored procedures
   Completed schema test: TEST_UNEXPECTED_PROCEDURES --> Test that the schema does not contain any unexpected stored procedures +++ PASS
   Starting schema test:  TEST_UNEXPECTED_VIEWS  Test that the schema does not contain any unexpected views
   Completed schema test: TEST_UNEXPECTED_VIEWS --> Test that the schema does not contain any unexpected views +++ PASS
   Starting index test for table MDS_ATTRIBUTES:  TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
   Completed index test for table MDS_ATTRIBUTES: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
   Completed index test for table MDS_LABELS: TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes +++ PASS
   Starting index test for table MDS_LARGE_ATTRIBUTES:  TEST_UNEXPECTED_INDEXES --> Test that the table does not contain any unexpected indexes
   Starting schema test:  TEST_UNEXPECTED_TRIGGERS  Test that the schema does not contain any unexpected triggers
   Completed schema test: TEST_UNEXPECTED_TRIGGERS --> Test that the schema does not contain any unexpected triggers +++ PASS
   Starting schema test:  TEST_UNEXPECTED_COLUMNS  Test that tables and views do not contain any unexpected columns
   Completed schema test: TEST_UNEXPECTED_COLUMNS --> Test that tables and views do not contain any unexpected columns +++ PASS
   Starting datatype test for table MDS_ATTRIBUTES:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table MDS_ATTRIBUTES: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table MDS_COMPONENTS:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Starting permissions test:  TEST_DBA_TABLE_GRANTS  Test that DBA user has privilege to view all user tables
   Completed permissions test: TEST_DBA_TABLE_GRANTS --> Test that DBA user has privilege to view all user tables +++ PASS
   Starting schema test:  TEST_ENOUGH_TABLESPACE  Test that the schema tablespaces automatically extend if full
   Completed schema test: TEST_ENOUGH_TABLESPACE --> Test that the schema tablespaces automatically extend if full +++ PASS
   Starting schema test:  TEST_USER_TABLESPACE_QUOTA  Test that tablespace quota for this user is sufficient to perform the upgrade
   Completed schema test: TEST_USER_TABLESPACE_QUOTA --> Test that tablespace quota for this user is sufficient to perform the upgrade +++ PASS
   Starting schema test:  TEST_ONLINE_TABLESPACE  Test that schema tablespaces are online
   Completed schema test: TEST_ONLINE_TABLESPACE --> Test that schema tablespaces are online +++ PASS
   Starting schema test:  TEST_DATABASE_VERSION  Test that the database server version number is supported for upgrade
     INFO   Database product version: Oracle Database 12c Enterprise Edition Release 12.2.1.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
   Completed schema test: TEST_DATABASE_VERSION --> Test that the database server version number is supported for upgrade +++ PASS
   Finished readiness check of Oracle Metadata Services with status: FAILURE.

Parent topic: Running a Pre-Upgrade Readiness Check

Creating the Required Schemas

When upgrading, you must create the required schemas. You can use the Repository Creation Utility (RCU) to create customized schemas or, optionally, you can use the Upgrade Assistant to create schemas using the default schema settings. This procedure describes how to create schemas using the RCU. Information about using the Upgrade Assistant to create schemas is covered in the upgrade procedures.

The following schemas must exist before you upgrade. If you are not sure which schemas you currently have, refer to the steps below to identify the existing schemas in your domain. You do not need to re-create these schemas if they already exist.

  • Service Table schema (prefix_STB). This schema is required for domain-based upgrades. It stores basic schema configuration information (for example, schema prefixes and passwords) that can be accessed and used by other Oracle Fusion Middleware components during the domain creation. This schema is automatically created when you run the Repository Creation Utility (RCU), where you specify the existing schema owner prefix that you used for your other schemas.

    Note:

    If the Service Table schema does not exist, you may encounter the error message UPGAST-00328 : The schema version registry table does not exist on this database. If that happens it is necessary to create the service table schema in order to run Upgrade Assistant

To create the schemas with the RCU:
  1. (Optional) If you wish to confirm the schemas which are present in your existing domain, then connect to the database as a user with DBA privileges, and run the following code from SQL*Plus:
    SET LINE 120
COLUMN MRC_NAME FORMAT A14
COLUMN COMP_ID FORMAT A20
COLUMN VERSION FORMAT A12
COLUMN STATUS FORMAT A9
COLUMN UPGRADED FORMAT A8
SELECT MRC_NAME, COMP_ID, OWNER, VERSION, STATUS, UPGRADED FROM SCHEMA_VERSION_REGISTRY ORDER BY MRC_NAME, COMP_ID ;
  2. Verify that a certified JDK already exists on your system by running java -version from the command line. For 14c (14.1.2.1.0), the certified JDK is 17.0.12 and later.
    Ensure that the JAVA_HOME environment variable is set to the location of the certified JDK. For example:
    • (UNIX) setenv JAVA_HOME=/home/Oracle/Java/jdk17.0.12
    • (Windows) set JAVA_HOME=C:\home\Oracle\Java\jdk17.0.12
    Add $JAVA_HOME/bin to $PATH.
  3. Go to the oracle_common/bin directory:
    • (UNIX) NEW_ORACLE_HOME/oracle_common/bin
    • (Windows) NEW_ORACLE_HOME\oracle_common\bin
  4. Start the RCU:
    • (UNIX) ./rcu
    • (Windows) rcu.bat
  5. On the Welcome screen, click Next.
  6. On the Create Repository screen, select Create Repository and then select System Load and Product Load.
    If you do not have DBA privileges, select Prepare Scripts for System Load. This will generate a SQL script containing all the same SQL statements and blocks that would have been called if the RCU were to execute the actions for the selected components. After the script is generated, a user with the necessary SYS or SYSDBA privileges can execute the script to complete the system load phase.

    Click Next.

  7. On the Database Connection Details screen, select the Database Type and enter the connection information for the database that hosts the 12c (12.2.1.4.0) schemas. See the pertinent table below.

    Table 3-5 Connection Credentials for Oracle Databases and Oracle Databases with Edition-Based Redefinition

    Option Description and Example
    Host Name

    Specify the name of the server where your database is running in the following format:

    examplehost.exampledomain.com

    For Oracle RAC databases, specify the VIP name or one of the node names in this field.
    Port

    Specify the port number for your database. The default port number for Oracle databases is 1521.

    Service Name

    Specify the service name for the database. Typically, the service name is the same as the global database name.

    For Oracle RAC databases, specify the service name of one of the nodes in this field. For example:

    examplehost.exampledomain.com
    Username Enter the user name for your database. The default user name is SYS.
    Password Enter the password for your database user.
    Role

    Select the database user's role from the drop-down list:

    Normal or SYSDBA
  8. On the Select Components screen, if you have:
    • Oracle Unified Directory (OUD) as the backend directory deployment, complete the following steps:
      1. Select Create new prefix and specify a custom prefix.
      2. Select the Oracle Platform Security Services schema.
        This automatically selects the following schemas as dependencies:
        • Audit Services
        • Audit Services Append
        • Audit Services Viewer
        • WebLogic Services
    • Oracle Internet Directory (OID) as the backend directory deployment:

      Select the existing prefix and then select the prefix that was used to create the existing schemas from the drop-down menu (for example, DEV14c).

      This prefix is used to logically group schemas together for use in this domain. Ensure that the following schemas are selected:
      • Oracle Platform Security Services
      • Audit Services
      • Audit Services Append
      • Audit Services Viewer
      • WebLogic Services

    Note:

    The Common Infrastructure Services (prefix_STB) schema is selected by default if it has not yet been created.

    Make a note of the prefix and schema names for the components you are installing as you will need this information when you configure the installation. Click Next.

  9. In the Checking Prerequisites dialog, verify that the prerequisites check is successful, then click OK.
  10. On the Schema Passwords screen, specify the passwords for your schema owners.
    Make a note of the passwords you enter on this screen as you will need this information while configuring your product installation.
  11. On the Map Tablespaces screen, configure the desired tablespace mapping for the schemas you want to create.
    Click Next, then click OK in the confirmation dialog. When the progress dialog shows the tablespace creation is complete, click OK.
  12. Verify the information on the Summary screen and click Create to begin schema creation.
    This screen contains information about the log files that were created from this RCU operation. Click on the name of a particular log file to view the contents of that file.
  13. Review the information on the Completion Summary screen to verify that the operation is completed successfully. Click Close to complete the schema creation.

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

Upgrading Product Schemas

After stopping servers and processes, use the Upgrade Assistant to upgrade your 12.2.1.4.0 schemas to the 14c (14.1.2.1.0) release of Oracle Fusion Middleware.

Note:

If your domain has the WLSSchemaDataSource data source, then you will need to verify which database user is assigned to it. If <PREFIX>_WLS_RUNTIME is assigned to it, then you need to change that to <PREFIX>_WLS . For more information, see Verify the Database User for the WLSSchemaDataSource Data Source.

Note:

As of 14c (14.1.2.1.0) the following schema changes have been made to help you prepare for an optional zero downtime upgrade to a future release:

  • Schemas created prior to 14c (14.1.2.1.0) with editions disabled and then upgraded to 14c (14.1.2.1.0) will become editions enabled.

  • Schemas created in 14c (14.1.2.1.0) will be created with editions enabled.

The Upgrade Assistant allows you to upgrade individually selected schemas or all schemas associated with a domain. The option you select determines which Upgrade Assistant screens you will use.

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

Starting the Upgrade Assistant

Run the Upgrade Assistant to upgrade product schemas, domain component configurations, or standalone system components to 14c (14.1.2.1.0).

Oracle recommends that you run the Upgrade Assistant as a non-SYSDBA user, completing the upgrade for one domain at a time. For information about creating a user for running Upgrade Assistant, see Creating a Non-SYSDBA User to Run the Upgrade Assistant.

To start the Upgrade Assistant:

  1. Go to the oracle_common/upgrade/bin directory:
    • (UNIX) ORACLE_HOME/oracle_common/upgrade/bin
    • (Windows) ORACLE_HOME\oracle_common\upgrade\bin
  2. Start the Upgrade Assistant:
    • (UNIX) ./ua
    • (Windows) ua.bat

Parent topic: Upgrading Product Schemas

Upgrading Oracle Internet Directory Schemas

Navigate through the screens in the Upgrade Assistant to upgrade the product schemas.

To upgrade product schemas with the Upgrade Assistant:
  1. On the Welcome screen, review an introduction to the Upgrade Assistant and information about important pre-upgrade tasks. Click Next.

    Note:

    For more information about any Upgrade Assistant screen, click Help on the screen.
  2. On the Selected Schemas screen, select the schema upgrade operation that you want to perform:
    • Individually Selected Schemas if you have a standalone installation or if you want to select individual schemas for upgrade and you do not want to upgrade all of the schemas used by the domain.

      Caution:

      Upgrade only those schemas that are used to support your 14c (14.1.2.1.0) components. Do not upgrade schemas that are currently being used to support components that are not included in Oracle Fusion Middleware 14c (14.1.2.1.0).
    • All Schemas Used by a Domain to allow the Upgrade Assistant to discover and select all components that have a schema available to upgrade in the domain specified in the Domain Directory field. This is also known as a domain assisted schema upgrade. Additionally, the Upgrade Assistant pre-populates connection information on the schema input screens.

      Note:

      Oracle recommends that you select All Schemas Used by a Domain for most upgrades to ensure all of the required schemas are included in the upgrade. However, use the Individually Selected Schemas option for standalone installations.

    Click Next.

  3. If you selected Individually Selected Schemas: On the Available Components screen, select the components for which you want to upgrade schemas. When you select a component, the schemas and any dependencies are automatically selected.
  4. On the Prerequisites screen, acknowledge that the prerequisites have been met by selecting all the check boxes. Click Next.

    Note:

    The Upgrade Assistant does not verify whether the prerequisites have been met.
  5. On the Schema Credentials screen(s), specify the database connection details for each schema you are upgrading (the screen name changes based on the schema selected):

    • Select the database type from the Database Type drop-down menu.

    • Enter the database connection details, and click Connect.

    • Select the schema you want to upgrade from the Schema User Name drop-down menu, and then enter the password for the schema. Be sure to use the correct schema prefix for the schemas you are upgrading.

  6. On the Examine screen, review the status of the Upgrade Assistant as it examines each schema, verifying that the schema is ready for upgrade. If the status is Examine finished, click Next.
    If the examine phase fails, Oracle recommends that you cancel the upgrade by clicking No in the Examination Failure dialog. Click View Log to see what caused the error and refer to Troubleshooting Your Upgrade in Upgrading with the Upgrade Assistant for information on resolving common upgrade errors.

    Note:

    • If you resolve any issues detected during the examine phase without proceeding with the upgrade, you can start the Upgrade Assistant again without restoring from backup. However, if you proceed by clicking Yes in the Examination Failure dialog box, you need to restore your pre-upgrade environment from backup before starting the Upgrade Assistant again.

    • Canceling the examination process has no effect on the schemas or configuration data; the only consequence is that the information the Upgrade Assistant has collected must be collected again in a future upgrade session.

  7. On the Upgrade Summary screen, review the summary of the schemas that will be upgraded and/or created.
    Verify that the correct Source and Target Versions are listed for each schema you intend to upgrade.
    If you want to save these options to a response file to run the Upgrade Assistant again later in response (or silent) mode, click Save Response File and provide the location and name of the response file. A silent upgrade performs exactly the same function that the Upgrade Assistant performs, but you do not have to manually enter the data again.
    Click Next .
  8. On the Upgrade Progress screen, monitor the status of the upgrade.

    Caution:

    Allow the Upgrade Assistant enough time to perform the upgrade. Do not cancel the upgrade operation unless absolutely necessary. Doing so may result in an unstable environment.
    If any schemas are not upgraded successfully, refer to the Upgrade Assistant log files for more information.

    Note:

    The progress bar on this screen displays the progress of the current upgrade procedure. It does not indicate the time remaining for the upgrade.

    Click Next.

  9. If the upgrade is successful: On the Upgrade Success screen, click Close to complete the upgrade and close the wizard.

    If the upgrade fails: On the Upgrade Failure screen, click View Log to view and troubleshoot the errors. The logs are available at ORACLE_HOME/oracle_common/upgrade/logs.

    Note:

    If the upgrade fails, you must restore your pre-upgrade environment from backup, fix the issues, then restart the Upgrade Assistant.

Parent topic: Upgrading Product Schemas

Verifying the Schema Upgrade

After completing all the upgrade steps, verify that the upgrade was successful by checking that the schema version in schema_version_registry has been properly updated.

If you are using an Oracle database, connect to the database as a user having Oracle DBA privileges, and run the following from SQL*Plus to get the current version numbers: 

SET LINE 120
COLUMN MRC_NAME FORMAT A14
COLUMN COMP_ID FORMAT A20
COLUMN VERSION FORMAT A12
COLUMN STATUS FORMAT A9
COLUMN UPGRADED FORMAT A8
SELECT MRC_NAME, COMP_ID, OWNER, VERSION, STATUS, UPGRADED FROM SCHEMA_VERSION_REGISTRY ORDER BY MRC_NAME, COMP_ID ;

In the query result:

  • Check that the number in the VERSION column matches the latest version number for that schema. For example, verify that the schema version number is 14.1.2.1.0.

    Note:

    However, that not all schema versions will be updated. Some schemas do not require an upgrade to this release and will retain their pre-upgrade version number.

  • The STATUS field will be either UPGRADING or UPGRADED during the schema patching operation, and will become VALID when the operation is completed.

  • If the status appears as INVALID, the schema update failed. You should examine the logs files to determine the reason for the failure.

  • Synonym objects owned by IAU_APPEND and IAU_VIEWER will appear as INVALID, but that does not indicate a failure.

    They become invalid because the target object changes after the creation of the synonym. The synonyms objects will become valid when they are accessed. You can safely ignore these INVALID objects.

Parent topic: Upgrading Product Schemas

Reconfiguring the Domain

Run the Reconfiguration Wizard to reconfigure your domain component configurations to 14c (14.1.2.1.0).

When you reconfigure a WebLogic Server domain, the following items are automatically updated, depending on the applications in the domain:

  • WebLogic Server core infrastructure

  • Domain version

Note:

Before you begin the domain reconfiguration, note the following limitations:

  • Make sure that the original Middleware home does not include any deployments that can cause an error.

  • The Reconfiguration Wizard does not update any of your own applications that are included in the domain.

  • Transforming a non-dynamic cluster domain to a dynamic cluster domain during the upgrade process is not supported.

    The dynamic cluster feature is available when running the Reconfiguration Wizard, but Oracle only supports upgrading a non-dynamic cluster upgrade and then adding dynamic clusters. You cannot add dynamic cluster during the upgrade process.

Specifically, when you reconfigure a domain, the following occurs:

  • The domain version number in the config.xml file for the domain is updated to the Administration Server's installed WebLogic Server version.

  • Reconfiguration templates for all installed Oracle products are automatically selected and applied to the domain. These templates define any reconfiguration tasks that are required to make the WebLogic domain compatible with the current WebLogic Server version.

  • Start scripts are updated.

    If you want to preserve your modified start scripts, be sure to back them up before starting the Reconfiguration Wizard.

Note:

When the domain reconfiguration process starts, you can’t undo the changes that it makes. Before running the Reconfiguration Wizard, ensure that you have backed up the domain as covered in the pre-upgrade checklist. If an error or other interruption occurs while running the Reconfiguration Wizard, you must restore the domain by copying the files and directories from the backup location to the original domain directory. This is the only way to ensure that the domain has been returned to its original state before reconfiguration.

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

Backing Up the Domain

Before running the Reconfiguration Wizard, create a backup copy of the domain directory.

  1. Create a backup of the domain directory.
  2. Before updating the domain on each remote Managed Server, create a backup copy of the domain directory on each remote machine.
  3. Verify that the backed up versions of the domain are complete.
If domain reconfiguration fails for any reason, you must copy all files and directories from the backup directory into the original domain directory to ensure that the domain is returned entirely to its original state before reconfiguration.

Parent topic: Reconfiguring the Domain

Starting the Reconfiguration Wizard

Note:

Shut down the administration server and all collocated managed servers before starting the reconfiguration process.

To start the Reconfiguration Wizard in graphical mode:

  1. Sign in to the system on which the domain resides.
  2. Open the command shell (on UNIX operating systems) or open a command prompt window (on Windows operating systems).
  3. Go to the oracle_common/common/bin directory:
    • (UNIX) NEW_ORACLE_HOME/oracle_common/common/bin
    • (Windows) NEW_ORACLE_HOME\oracle_common\commom\bin
  4. Start the Reconfiguration Wizard with the following logging options:
    • (UNIX) ./reconfig.sh -log=log_file -log_priority=ALL
    • (Windows) reconfig.cmd -log=log_file -log_priority=ALL

    where log_file is the absolute path of the log file you'd like to create for the domain reconfiguration session. This can be helpful if you need to troubleshoot the reconfiguration process.

    The parameter -log_priority=ALL ensures that logs are logged in fine mode.

    Note:

    When you run this command, the following error message might appear to indicate that the default cache directory is not valid:

    *sys-package-mgr*: can't create package cache dir

    You can change the cache directory by setting the environment variable CONFIG_JVM_ARGS. For example:

    CONFIG_JVM_ARGS=-Dpython.cachedir=valid_directory

Parent topic: Reconfiguring the Domain

Reconfiguring the Oracle Internet Directory Domain

Navigate through the screens in the Reconfiguration Wizard to reconfigure your existing domain.

Note:

If the source is a clustered environment, run the Reconfiguration Wizard on the primary node only. Use the pack/unpack utility to apply the changes to other cluster members in the domain.
To reconfigure the domain with the Reconfiguration Wizard:
  1. On the Select Domain screen, specify the location of the domain you want to upgrade or click Browse to navigate and select the domain directory. Click Next.
  2. On the Reconfiguration Setup Progress screen, view the progress of the setup process. When complete, click Next.
    During this process:

    • The reconfiguration templates for your installed products, including Fusion Middleware products, are automatically applied. This updates various domain configuration files such as config.xml, config-groups.xml, and security.xml (among others).

    • Schemas, scripts, and other such files that support your Fusion Middleware products are updated.

    • The domain upgrade is validated.

  3. On the Domain Mode and JDK screen, select the JDK to use in the domain or click Browse to navigate to the JDK you want to use. The supported JDK version for 14c (14.1.2.1.0) is 17.0.12 and later. Click Next.

    Note:

    You cannot change the Domain Mode at this stage.
    For a list of JDKs that are supported for a specific platform, see Oracle Fusion Middleware Supported System Configurations.
  4. On the JDBC Datasources screen, select the datasource schedulerDS. Click Next.
  5. On the JDBC Data Sources Test screen, verify that the connection test completes. Wait till the message Test Successful! is displayed, and click Next.
  6. On the Database Configuration Type screen, select RCU Data to connect to the Server Table (_STB) schema.
    Enter the database connection details using the RCU service table (_STB) schema credentials and click Get RCU Configuration.
    The Reconfiguration Wizard uses this connection to automatically configure the data sources required for components in your domain.

    Note:

    By default Oracle’s Driver (Thin) for Service connections; Versions: Any is the selected driver. If you specified an instance name in your connection details — instead of the service name — you must select Oracle’s Driver (Thin) for pooled instance connections; Versions: Any If you do not change the driver type, then the connection will fail.

    Note:

    For any existing 12c (12.2.1.4.0) datasource, the reconfiguration will preserve the existing values. For new datasources where the schema was created for 14c (14.1.2.1.0) by the RCU, the default connection data will be retrieved from the _STB schema. If no connection data for a given schema is found in the _STB schema, then the default connection data is used.
    If the check is successful, click Next. If the check fails, reenter the connection details correctly and try again.

    Note:

    If you are upgrading from 12c (12.2.1.4.0), and your database has _OPSS or _IAU 12c (12.2.1.4.0) database schemas, you must manually enter database connection details for those schemas. These schemas were not required in 12c and had to be created manually. Users could assign any name to these schemas, therefore the Reconfiguration Wizard does not recognize them. When providing connection information for _IAU, use the IAU_APPEND user information.
  7. On the JDBC Component Schema screen, verify that the DBMS/Service and the Host name is correct for each component schema and click Next.
  8. On the JDBC Component Schema Test screen, select all the component schemas and click Test Selected Connections to test the connection for each schema. The result of the test is indicated in the Status column.
    When the check is complete, click Next.
  9. On the Advanced Configuration screen, you can select all categories for which you want to perform advanced configuration. For each category you select, the appropriate configuration screen is displayed to allow you to perform advanced configuration.

    Note:

    The categories that are listed on the Advanced Configuration screen depend on the resources defined in the templates you selected for the domain.
    For this upgrade, select none of the options and click Next.
  10. On the Configuration Summary screen, review the detailed configuration settings of the domain before continuing.
    You can limit the items that are displayed in the right-most panel by selecting a filter option from the View drop-down list.
    To change the configuration, click Back to return to the appropriate screen. To reconfigure the domain, click Reconfig.

    Note:

    The location of the domain does not change when you reconfigure it.
  11. The Reconfiguration Progress screen displays the progress of the reconfiguration process.
    During this process:

    • Domain information is extracted, saved, and updated.

    • Schemas, scripts, and other such files that support your Fusion Middleware products are updated.

    When the progress bar shows 100%, click Next.
  12. The End of Configuration screen indicates whether the reconfiguration process completed successfully or failed. It also displays the location of the domain that was reconfigured as well as the Administration Server URL (including the listen port). If the reconfiguration is successful, it displays Oracle WebLogic Server Reconfiguration Succeeded.
    If the reconfiguration process did not complete successfully, an error message is displayed indicates the reason. Take appropriate action to resolve the issue. If you cannot resolve the issue, contact My Oracle Support.
    Note the Domain Location and the Admin Server URL for further operations.

Parent topic: Reconfiguring the Domain

Upgrading Domain Component Configurations

After reconfiguring the domain, use the Upgrade Assistant again to upgrade the domain component configurations inside the domain to match the updated domain configuration.

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

Starting the Upgrade Assistant

Run the Upgrade Assistant to upgrade product schemas, domain component configurations, or standalone system components to 14c (14.1.2.1.0).

Oracle recommends that you run the Upgrade Assistant as a non-SYSDBA user, completing the upgrade for one domain at a time. For information about creating a user for running Upgrade Assistant, see Creating a Non-SYSDBA User to Run the Upgrade Assistant.

To start the Upgrade Assistant:

  1. Go to the oracle_common/upgrade/bin directory:
    • (UNIX) ORACLE_HOME/oracle_common/upgrade/bin
    • (Windows) ORACLE_HOME\oracle_common\upgrade\bin
  2. Start the Upgrade Assistant:
    • (UNIX) ./ua
    • (Windows) ua.bat

Parent topic: Upgrading Domain Component Configurations

Upgrading Domain Component Configurations

Navigate through the screens in the Upgrade Assistant to upgrade component configurations in the WebLogic domain.

After running the Reconfiguration Wizard to reconfigure the WebLogic domain to 14c (14.1.2.1.0), you must run the Upgrade Assistant to upgrade the domain component configurations to match the updated domain configuration.

To upgrade domain component configurations with the Upgrade Assistant:
  1. On the Welcome screen, review an introduction to the Upgrade Assistant and information about important pre-upgrade tasks. Click Next.

    Note:

    For more information about any Upgrade Assistant screen, click Help on the screen.
  2. On the next screen:

    • Select All Configurations Used By a Domain. The screen name changes to WebLogic Components.

    • In the Domain Directory field, enter the WebLogic domain directory path.

    Click Next.

  3. If your pre-upgrade environment has multiple WebLogic domains, but the Oracle Web Services Manager (OWSM) Policy Manager is in only one domain, and OWSM agents are in the other domains: On the OWSM Policy Manager screen, provide the credentials for the WebLogic Administration Server domain where the Oracle Web Services Manager (OWSM) Policy Manager is deployed.
  4. On the Component List screen, verify that the list includes all the components for which you want to upgrade configurations and click Next.
    If you do not see the components you want to upgrade, click Back to go to the previous screen and specify a different domain.
  5. On the Prerequisites screen, acknowledge that the prerequisites have been met by selecting all the check boxes. Click Next.

    Note:

    The Upgrade Assistant does not verify whether the prerequisites have been met.
  6. On the Examine screen, review the status of the Upgrade Assistant as it examines each component, verifying that the component configuration is ready for upgrade. If the status is Ready for Upgrade, click Next.
    If the examine phase fails, Oracle recommends that you cancel the upgrade by clicking No in the Examination Failure dialog. Click View Log to see what caused the error and refer to Troubleshooting Your Upgrade in Upgrading with the Upgrade Assistant for information on resolving common upgrade errors.

    Note:

    • If you resolve any issues detected during the examine phase without proceeding with the upgrade, you can start the Upgrade Assistant again without restoring from backup. However, if you proceed by clicking Yes in the Examination Failure dialog box, you need to restore your pre-upgrade environment from backup before starting the Upgrade Assistant again.

    • Canceling the examination process has no effect on the configuration data; the only consequence is that the information the Upgrade Assistant has collected must be collected again in a future upgrade session.

  7. On the Upgrade Summary screen, review the summary of the options you have selected for component configuration upgrade.
    The response file collects and stores all the information that you have entered, and enables you to perform a silent upgrade at a later time. The silent upgrade performs exactly the same function that the Upgrade Assistant performs, but you do not have to manually enter the data again. If you want to save these options to a response file, click Save Response File and provide the location and name of the response file.
    Click Upgrade to start the upgrade process.
  8. On the Upgrade Progress screen, monitor the status of the upgrade.

    Caution:

    Allow the Upgrade Assistant enough time to perform the upgrade. Do not cancel the upgrade operation unless absolutely necessary. Doing so may result in an unstable environment.
    If any components are not upgraded successfully, refer to the Upgrade Assistant log files for more information.

    Note:

    The progress bar on this screen displays the progress of the current upgrade procedure. It does not indicate the time remaining for the upgrade.

    Click Next.

  9. If the upgrade is successful: On the Upgrade Success screen, click Close to complete the upgrade and close the wizard. The Post-Upgrade Actions window describes the manual tasks you must perform to make components functional in the new installation. This window appears only if a component has post-upgrade steps.
    If the upgrade fails: On the Upgrade Failure screen, click View Log to view and troubleshoot the errors. The logs are available at NEW_ORACLE_HOME/oracle_common/upgrade/logs.

    Note:

    If the upgrade fails you must restore your pre-upgrade environment from backup, fix the issues, then restart the Upgrade Assistant.

Note:

After successful upgrade, artifacts pertaining to Oracle Internet Directory component instances are copied over from AS Instances to WebLogic Domain. Also, new machines (such as oidhost1 and others) are created, and are associated with their corresponding OID instances.

Parent topic: Upgrading Domain Component Configurations

Starting Servers and Processes

After a successful upgrade, restart all processes and servers, including the Administration Server and any Managed Servers.

The components may be dependent on each other so they must be started in the correct order.

Note:

The procedures in this section describe how to start servers and processes using the WLST command-line utility or a script. You can also use the Oracle Fusion Middleware Control and the Oracle WebLogic Server Remote Console. See Starting and Stopping Administration and Managed Servers and Node Manager.

As of release 14c (14.1.2.0.0), the WebLogic Server Administration Console has been removed. For comparable functionality, you should use the WebLogic Remote Console. For more information, see Oracle WebLogic Remote Console.

To start your Fusion Middleware environment, follow the steps below.

Step 1: Start the Administration Server

Note:

Depending on your existing security settings, you may need to perform additional configuration before you can manage a domain with secured production mode enabled. For more information, see Connecting to the Administration Server using WebLogic Remote Console

.

To start the Administration Server, use the startWebLogic script:

  • (UNIX) DOMAIN_HOME/bin/startWebLogic.sh

  • (Windows) DOMAIN_HOME\bin\startWebLogic.cmd

When prompted, enter your user name, password, and the URL of the Administration Server.

Step 2: Start the Managed Servers

To start a WebLogic Server Managed Server, use the startManagedWebLogic script:

  • (UNIX) DOMAIN_HOME/bin/startManagedWebLogic.sh managed_server_name admin_url

  • (Windows) DOMAIN_HOME\bin\startManagedWebLogic.cmd managed_server_name admin_url

When prompted, enter your user name and password.

Step 3: Start Node Manager

To start Node Manager, use the startNodeManager script:

  • (UNIX) DOMAIN_HOME/bin/startNodeManager.sh

  • (Windows) DOMAIN_HOME\bin\startNodeManager.cmd

Step 4: Start Oracle Internet Directory Components

To start the Oracle Internet Directory components, use the startComponent script:

  • (UNIX) DOMAIN_HOME/bin/startComponent.sh component_name

  • (Windows) DOMAIN_HOME\bin\startComponent.cmd component_name

Parent topic: Upgrading Domain Component Configurations

Verifying the Domain-Specific-Component Configurations Upgrade

To verify that the domain-specific-component configurations upgrade was successful, sign in to the Remote Console and verify that the version numbers for each upgraded component is 14.1.2.1.0.

Note:

Before you can access the Hosted WebLogic Remote Console, you must deploy the hosted WebLogic Remote Console. For more information, see the Remote Console Online Help.

To sign in to the Remote Console, go to: http://hostname:port/rconsole or for HTTPS, https://hostname:port/rconsole.

Note:

After a successful upgrade, make sure you run the administration tools from the new 14c (14.1.2.1.0) Oracle home directory and not from the previous Oracle home directory.

During the upgrade process, some OWSM documents, including policy sets and predefined documents such as policies and assertion templates, may need to be upgraded. If a policy set or a predefined document is upgraded, its version number is incremented by 1.

If you created the FMW user to run the Upgrade Assistant, ensure that you delete the account after verifying your upgrade was successful.

Parent topic: Upgrading Domain Component Configurations

Starting Servers and Processes

After a successful upgrade, restart all processes and servers, including the Administration Server and any Managed Servers.

The components may be dependent on each other so they must be started in the correct order.

Note:

The procedures in this section describe how to start servers and processes using the WLST command-line utility or a script. You can also use the Oracle Fusion Middleware Control and the Oracle WebLogic Server Remote Console. See Starting and Stopping Administration and Managed Servers and Node Manager.

As of release 14c (14.1.2.0.0), the WebLogic Server Administration Console has been removed. For comparable functionality, you should use the WebLogic Remote Console. For more information, see Oracle WebLogic Remote Console.

To start your Fusion Middleware environment, follow the steps below.

Step 1: Start the Administration Server

Note:

Depending on your existing security settings, you may need to perform additional configuration before you can manage a domain with secured production mode enabled. For more information, see Connecting to the Administration Server using WebLogic Remote Console

.

To start the Administration Server, use the startWebLogic script:

  • (UNIX) DOMAIN_HOME/bin/startWebLogic.sh

  • (Windows) DOMAIN_HOME\bin\startWebLogic.cmd

When prompted, enter your user name, password, and the URL of the Administration Server.

Step 2: Start the Managed Servers

To start a WebLogic Server Managed Server, use the startManagedWebLogic script:

  • (UNIX) DOMAIN_HOME/bin/startManagedWebLogic.sh managed_server_name admin_url

  • (Windows) DOMAIN_HOME\bin\startManagedWebLogic.cmd managed_server_name admin_url

When prompted, enter your user name and password.

Step 3: Start Node Manager

To start Node Manager, use the startNodeManager script:

  • (UNIX) DOMAIN_HOME/bin/startNodeManager.sh

  • (Windows) DOMAIN_HOME\bin\startNodeManager.cmd

Step 4: Start Oracle Internet Directory Components

To start the Oracle Internet Directory components, use the startComponent script:

  • (UNIX) DOMAIN_HOME/bin/startComponent.sh component_name

  • (Windows) DOMAIN_HOME\bin\startComponent.cmd component_name

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

Creating SSL Wallet in 14c (14.1.2.1.0)

Oracle Internet Directory (OID) server in 12c does not support certificates signed with MD5 signatures.

After upgrade, any MD5 signature based certificates created and used against OID server need to be changed to at least SHA1 based certificates to ensure proper SSL communication with OID server.

For more information about creating SSL wallet, see Configuring SSL by Using WLST in the Administering Oracle Internet Directory.

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments

Accessing the New Oracle Directory Services Manager Console

The Oracle Directory Services Manager (ODSM) console URL is changed in 14c (14.1.2.1.0).

After upgrading Oracle Internet Directory to 14c (14.1.2.1.0), you can access the Oracle Directory Services Manager (ODSM) console at the following URL:

http://host:adminserver_port/odsm

The default port is 7001.

Parent topic: Upgrading Oracle Internet Directory Single Node 12c Environments