1. Upgrading Oracle WebCenter
  2. Upgrading Oracle WebCenter from 11g to 12c
  3. Upgrading Oracle Universal Records Management from 11g to 12c

8 Upgrading Oracle Universal Records Management from 11g to 12c

From 12c (12.2.1.3.0) onwards, you can upgrade Oracle Universal Records Management (URM) and Oracle Universal Content Management ( UCM) from 11g to UCM Release 12c (12.2.1.4.0).

The valid starting point for upgrading URM is Release 11.1.1.9.0 and above.

You can follow the procedure described in this section to upgrade a domain containing URM or both URM and UCM.

To upgrade URM and/or UCM from 11g to 12c, complete the following tasks:

  • About the URM and/or UCM Upgrade Process from 11g to 12c
    Review the flowchart and the roadmap for an overview of the upgrade process for a domain containing URM or both URM and UCM.
  • Installing the Product Distribution
    Before beginning your upgrade, download the 12c (12.2.1.4.0) Oracle Fusion Middleware Infrastructure and Oracle WebCenter Content distributions on the target system and install them using Oracle Universal Installer.
  • Running a Pre-Upgrade Readiness Check
    To identify potential issues with the upgrade, Oracle recommends that you run a readiness check before you start the upgrade process. Be aware that the readiness check may not be able to discover all potential issues with your upgrade. An upgrade may still fail, even if the readiness check reports success.
  • Stopping Servers and Processes
    Before you run the Upgrade Assistant to upgrade your schemas and configurations, you must shut down all of the pre-upgrade processes and servers, including the Administration Server and any managed servers.
  • Upgrading Product Schemas
    After stopping servers and processes, use the Upgrade Assistant to upgrade supported product schemas to the current release of Oracle Fusion Middleware.
  • About Reconfiguring the Domain
    Run the Reconfiguration Wizard to reconfigure your domain component configurations to 12c (12.2.1.4.0).
  • Starting Servers and Processes
    After a successful upgrade, restart all processes and servers, including the Administration Server and any Managed Servers.
  • Verifying the Upgrade
    After you have upgraded a domain containing URM and/or from 11g to 12c, you should be able to access the 12c UCM server using the URLs depending upon the component that you upgraded.

Parent topic: Upgrading Oracle WebCenter from 11g to 12c

About the URM and/or UCM Upgrade Process from 11g to 12c

Review the flowchart and the roadmap for an overview of the upgrade process for a domain containing URM or both URM and UCM.

Figure 8-1 Upgrade Process Flowchart for URM and/or UCM from 11g to 12c Release

Description of Figure 8-1 follows
Description of "Figure 8-1 Upgrade Process Flowchart for URM and/or UCM from 11g to 12c Release"

Table 8-1 provides a roadmap for tasks that you must perform to upgrade URM and/or UCM from 11g to 12c.

Table 8-1 Tasks for Upgrading URM and/or UCM from 11g to 12c Release

Task Description

Required

If you have not done so already, review the introductory topics in this guide and complete the required pre-upgrade tasks.

The pre-upgrade tasks include cloning your production environment, verifying system requirements and certifications, purging unused data, and creating non-SYSDBA user.

For a complete list of pre-upgrade tasks, see Pre-Upgrade Tasks for Oracle WebCenter Components.

Required

Download and install the 12c (12.2.1.4.0) Oracle Fusion Middleware Infrastructure and Oracle WebCenter Content distributions.

The Infrastructure distribution packs the WebLogic Server and the Java Required Files (JRF) that are required to set up the foundation to install other Fusion Middleware products.

As per the upgrade topology defined in this guide, you must install the Infrastructure in a new Oracle home.

You must install the Oracle WebCenter Content distribution in the Oracle home that is created when you install the 12.2.1.4.0 Infrastructure. To install the product distributions, follow the procedure described in Installing the Product Distribution.

Optional

Run a pre-upgrade readiness check.

Perform the domain-based readiness check on the existing domain to check for schemas and configuration. See Running a Pre-Upgrade Readiness Check.

Required

Shut down the existing environment (stop all Administration and Managed Servers).

WARNING:

Failure to shut down your servers during an upgrade may lead to data corruption.

See Stopping Servers and Processes.

Required

Upgrade the 11g schemas and create the required 12c schemas with the Upgrade Assistant.

Upgrade and create the schema components with the Upgrade Assistant by following the procedure described in Upgrading Product Schemas.

Note:

The schemas are created with the default tablespace settings. If you want to customize the tablespaces that your schemas use, create the schemas with the Repository Creation Utility (RCU).

Required

Reconfigure the existing domain.

When you run the Reconfiguration Wizard on your existing domain, it prepares your domain for upgrade by selecting and applying the recongifuration templates.

Reconfigure the domain by following the procedure described in About Reconfiguring the Domain.

Required

Restart the servers and processes.

See Starting Servers and Processes.

Note:

You don’t need to upgrade the domain configuration with the Upgrade Assistant. These changes are automatically handled when you start the servers and processes.

Required

Verify the upgrade.

The upgrade from UCM is successful if you can access the UCM server through http://host:16200/cs.

The upgrade from URM is successful if you can access the URM server through http://host:16300/urm.

See Verifying the Upgrade.

Parent topic: Upgrading Oracle Universal Records Management from 11g to 12c

Installing the Product Distribution

Before beginning your upgrade, download the 12c (12.2.1.4.0) Oracle Fusion Middleware Infrastructure and Oracle WebCenter Content distributions on the target system and install them using Oracle Universal Installer.

Note:

When Infrastructure is required for the upgrade, you must install the Oracle Fusion Middleware distribution first before you install other Fusion Middleware products.

Make sure that you download and install all the Oracle products that are part of your domain, for example Oracle HTTP Server. You must install the 12.2.1.4.0 binaries into a new Oracle home. It should be on the same host as the existing Oracle home.

To install the 12c (12.2.1.4.0) distributions:
  1. Sign in to the target system.
  2. Download the following from Oracle Technology Network or Oracle Software Delivery Cloud to your target system:
    • Oracle Fusion Middleware Infrastructure (fmw_12.2.1.4.0_infrastructure_generic.jar)
    • Oracle WebCenter Content (fmw_12.2.1.4.0_wccontent_generic.jar)
  3. Change to the directory where you downloaded the 12c (12.2.1.4.0) product distribution.
  4. Start the installation program for Oracle Fusion Middleware Infrastructure:
    • (UNIX) JDK_HOME/bin/java -jar fmw_12.2.1.4.0_infrastructure.jar
    • (Windows) JDK_HOME\bin\java -jar fmw_12.2.1.4.0_infrastructure.jar
  5. On UNIX operating systems, the Installation Inventory Setup screen appears if this is the first time you are installing an Oracle product on this host.
    Specify the location where you want to create your central inventory. Make sure that the operating system group name selected on this screen has write permissions to the central inventory location, and click Next.

    Note:

    The Installation Inventory Setup screen does not appear on Windows operating systems.
  6. On the Welcome screen, review the information to make sure that you have met all the prerequisites. Click Next.
  7. On the Auto Updates screen, select an option:

    • Skip Auto Updates: If you do not want your system to check for software updates at this time.

    • Select patches from directory: To navigate to a local directory if you downloaded patch files.

    • Search My Oracle Support for Updates: To automatically download software updates if you have a My Oracle Support account. You must enter Oracle Support credentials then click Search. To configure a proxy server for the installer to access My Oracle Support, click Proxy Settings. Click Test Connection to test the connection.

    Click Next.
  8. On the Installation Location screen, specify the location for the Oracle home directory and click Next.
    For more information about Oracle Fusion Middleware directory structure, see Understanding Directories for Installation and Configuration in Oracle Fusion Middleware Planning an Installation of Oracle Fusion Middleware.
  9. The Installation Type screen only appears when you are installing the Infrastructure. On this screen, select Fusion Middleware Infrastructure and click Next.
  10. The Prerequisite Checks screen analyzes the host computer to ensure that the specific operating system prerequisites have been met.
    To view the list of tasks that are verified, select View Successful Tasks. To view log details, select View Log. If any prerequisite check fails, then an error message appears at the bottom of the screen. Fix the error and click Rerun to try again. To ignore the error or the warning message and continue with the installation, click Skip (not recommended).
  11. On the Installation Summary screen, verify the installation options that you selected.
    If you want to save these options to a response file, click Save Response File and enter the response file location and name. The response file collects and stores all the information that you have entered, and enables you to perform a silent installation (from the command line) at a later time.

    Click Install to begin the installation.

  12. On the Installation Progress screen, when the progress bar displays 100%, click Finish to dismiss the installer, or click Next to see a summary.
  13. The Installation Complete screen displays the Installation Location and the Feature Sets that are installed. Review this information and click Finish to close the installer.
  14. After you have installed Oracle Fusion Middleware Infrastructure, enter the following command to start the installer for your product distribution and repeat the steps above to navigate through the installer screens:
    (UNIX) JDK_HOME/bin/java -jar fmw_12.2.1.4.0_wccontent_generic.jar
    (Windows) JDK_HOME\bin\java -jar fmw_12.2.1.4.0_wccontent_generic.jar

Parent topic: Upgrading Oracle Universal Records Management from 11g to 12c

Running a Pre-Upgrade Readiness Check

To identify potential issues with the upgrade, Oracle recommends that you run a readiness check before you start the upgrade process. Be aware that the readiness check may not be able to discover all potential issues with your upgrade. An upgrade may still fail, even if the readiness check reports success.

Parent topic: Upgrading Oracle Universal Records Management from 11g to 12c

About Running a Pre-Upgrade Readiness Check

You can run the Upgrade Assistant in -readiness mode to detect issues before you perform the actual upgrade. You can run the readiness check in GUI mode using the Upgrade Assistant or in silent mode using a response file.

The Upgrade Assistant readiness check performs a read-only, pre-upgrade review of your Fusion Middleware schemas and WebLogic domain configurations that are at a supported starting point. The review is a read-only operation.

The readiness check generates a formatted, time-stamped readiness report so you can address potential issues before you attempt the actual upgrade. If no issues are detected, you can begin the upgrade process. Oracle recommends that you read this report thoroughly before performing an upgrade.

You can run the readiness check while your existing Oracle Fusion Middleware domain is online (while other users are actively using it) or offline.

You can run the readiness check any number of times before performing any actual upgrade. However, do not run the readiness check after an upgrade has been performed, as the report results may differ from the result of pre-upgrade readiness checks.

Note:

To prevent performance from being affected, Oracle recommends that you run the readiness check during off-peak hours.

Parent topic: Running a Pre-Upgrade Readiness Check

Starting the Upgrade Assistant in Readiness Mode

Use the -readiness parameter to start the Upgrade Assistant in readiness mode.

To perform a readiness check on your pre-upgrade environment with the Upgrade Assistant:
  1. Go to the oracle_common/upgrade/bin directory:
    • (UNIX) ORACLE_HOME/oracle_common/upgrade/bin
    • (Windows) ORACLE_HOME\oracle_common\upgrade\bin
  2. Start the Upgrade Assistant.
    • (UNIX) ./ua -readiness
    • (Windows) ua.bat -readiness

    Note:

    If the DISPLAY environment variable is not set up properly to allow for GUI mode, you may encounter the following error:
    Xlib: connection to ":1.0" refused by server
Xlib: No protocol specified

    To resolve this issue, set the DISPLAY environment variable to the system name or IP address of your local workstation, and rerun Upgrade Assistant.

    If you continue to receive these errors after setting DISPLAY, try launching another GUI tool, such as vncconfig. If you see the same errors, your DISPLAY environment variable may still not be set correctly.

    For information about other parameters that you can specify on the command line, see:

Parent topic: Running a Pre-Upgrade Readiness Check

Upgrade Assistant Parameters

When you start the Upgrade Assistant from the command line, you can specify additional parameters.

Table 8-2 Upgrade Assistant Command-Line Parameters

Parameter Required or Optional Description

-readiness

 Required for readiness checks

Note: Readiness checks cannot be performed on standalone installations (those not managed by the WebLogic Server).

Performs the upgrade readiness check without performing an actual upgrade.

Schemas and configurations are checked.

Do not use this parameter if you have specified the -examine parameter.

-threads

Optional

Identifies the number of threads available for concurrent schema upgrades or readiness checks of the schemas.

The value must be a positive integer in the range 1 to 8. The default is 4.

-response

Required for silent upgrades or silent readiness checks

Runs the Upgrade Assistant using inputs saved to a response file generated from the data that is entered when the Upgrade Assistant is run in GUI mode. Using this parameter runs the Upgrade Assistant in silent mode (without displaying Upgrade Assistant screens).

-examine

Optional

Performs the examine phase but does not perform an actual upgrade.

Do not specify this parameter if you have specified the -readiness parameter.

-logLevel attribute

Optional

Sets the logging level, specifying one of the following attributes:

  • TRACE

  • NOTIFICATION

  • WARNING

  • ERROR

  • INCIDENT_ERROR

The default logging level is NOTIFICATION.

Consider setting the -logLevel TRACE attribute to so that more information is logged. This is useful when troubleshooting a failed upgrade. The Upgrade Assistant's log files can become very large if -logLevel TRACE is used.

-logDir location

Optional

Sets the default location of upgrade log files and temporary files. You must specify an existing, writable directory where the Upgrade Assistant creates log files and temporary files.

The default locations are:

(UNIX)

ORACLE_HOME/oracle_common/upgrade/logs
ORACLE_HOME/oracle_common/upgrade/temp

(Windows)

ORACLE_HOME\oracle_common\upgrade\logs
ORACLE_HOME\oracle_common\upgrade\temp

-help

Optional

Displays all of the command-line options.

Performing a Readiness Check with the Upgrade Assistant

Navigate through the screens in the Upgrade Assistant to complete the pre-upgrade readiness check.

Readiness checks are performed only on schemas or component configurations that are at a supported upgrade starting point.
To complete the readiness check:
  1. On the Welcome screen, review information about the readiness check. Click Next.
  2. On the Readiness Check Type screen, select the readiness check that you want to perform:
    • Individually Selected Schemas allows you to select individual schemas for review before upgrade. The readiness check reports whether a schema is supported for an upgrade or where an upgrade is needed.

      When you select this option, the screen name changes to Selected Schemas.

    • Domain Based allows the Upgrade Assistant to discover and select all upgrade-eligible schemas or component configurations in the domain specified in the Domain Directory field.

      When you select this option, the screen name changes to Schemas and Configuration.

      Leave the default selection if you want the Upgrade Assistant to check all schemas and component configurations at the same time, or select a specific option:

      • Include checks for all schemas to discover and review all components that have a schema available to upgrade.

      • Include checks for all configurations to review component configurations for a managed WebLogic Server domain.

    Click Next.

  3. If you selected Individually Selected Schemas: On the Available Components screen, select the components that have a schema available to upgrade for which you want to perform a readiness check.
    If you selected Domain Based: On the Component List screen, review the list of components that are present in your domain for which you want to perform a readiness check.
    If you select a component that has dependent components, those components are automatically selected. For example, if you select Oracle Platform Security Services, Oracle Audit Services is automatically selected.

    Depending on the components you select, additional screens may display. For example, you may need to:

    • Specify the domain directory.

      For example: Middleware\user_projects\domains\base_domain.

    • Specify the location of the configuration file (wcs_properties.json).

      For example, Middleware\user_projects\domains\base_domain.

    • Specify schema credentials to connect to the selected schema: Database Type, DBA User Name, and DBA Password. Then click Connect.

      Note:

      Oracle database is the default database type. Make sure that you select the correct database type before you continue. If you discover that you selected the wrong database type, do not go back to this screen to change it to the correct type. Instead, close the Upgrade Assistant and restart the readiness check with the correct database type selected to ensure that the correct database type is applied to all schemas.

    • Select the Schema User Name option and specify the Schema Password.

    Click Next to start the readiness check.
  4. On the next screen, specify the administrator user name and password for the database containing the schema, and click Next.
  5. On the Readiness Summary screen, review the summary of the readiness checks that will be performed based on your selections.
    If you want to save your selections to a response file to run the Upgrade Assistant again later in response (or silent) mode, click Save Response File and provide the location and name of the response file. A silent upgrade performs exactly the same function that the Upgrade Assistant performs, but you do not have to manually enter the data again.
    For a detailed report, click View Log.
    Click Next.
  6. On the Readiness Check screen, review the status of the readiness check. The process can take several minutes.
    If you are checking multiple components, the progress of each component displays in its own progress bar in parallel.
    When the readiness check is complete, click Continue.
  7. On the End of Readiness screen, review the results of the readiness check (Readiness Success or Readiness Failure):

    • If the readiness check is successful, click View Readiness Report to review the complete report. Oracle recommends that you review the Readiness Report before you perform the actual upgrade even when the readiness check is successful. Use the Find option to search for a particular word or phrase within the report. The report also indicates where the completed Readiness Check Report file is located.

    • If the readiness check encounters an issue or error, click View Log to review the log file, identify and correct the issues, and then restart the readiness check. The log file is managed by the command-line options you set.

Parent topic: Running a Pre-Upgrade Readiness Check

Understanding the Readiness Report

After performing a readiness check for your domain, review the report to determine whether you need to take any action for a successful upgrade.

The format of the readiness report file is:

readiness<timestamp>.txt

Where, timestamp indicates the date and time of when the readiness check was run.

A readiness report contains the following information:

Table 8-3 Readiness Report Elements

Report Information Description Required Action
Overall Readiness Status: SUCCESS or FAILURE The top of the report indicates whether the readiness check passed or completed with one or more errors. If the report completed with one or more errors, search for FAIL and correct the failing issues before attempting to upgrade. You can re-run the readiness check as many times as necessary before an upgrade.

Timestamp

The date and time that the report was generated.

No action required.

Log file location

/oracle_common/upgrade/logs

The directory location of the generated log file.

No action required.
Domain Directory Displays the domain location No action required.

Readiness report location

/oracle_common/upgrade/logs

The directory location of the generated readiness report.

No action required.

Names of components that were checked

The names and versions of the components included in the check and status.

If your domain includes components that cannot be upgraded to this release, such as SOA Core Extension, do not attempt an upgrade.

Names of schemas that were checked

The names and current versions of the schemas included in the check and status.

Review the version numbers of your schemas. If your domain includes schemas that cannot be upgraded to this release, do not attempt an upgrade.

Individual Object Test Status: FAIL

The readiness check test detected an issue with a specific object.

Do not upgrade until all failed issues have been resolved.

Individual Object Test Status: PASS

The readiness check test detected no issues for the specific object.

If your readiness check report shows only the PASS status, you can upgrade your environment. Note, however, that the Readiness Check cannot detect issues with externals such as hardware or connectivity during an upgrade. You should always monitor the progress of your upgrade.

Completed Readiness Check of <Object> Status: FAILURE The readiness check detected one or more errors that must be resolved for a particular object such as a schema, an index, or datatype. Do not upgrade until all failed issues have been resolved.
Completed Readiness Check of <Object> Status: SUCCESS The readiness check test detected no issues. No action required.

Here is a sample Readiness Report file. Your report may not include all of these checks. 

Upgrade readiness check completed with one or more errors.

This readiness check report was created on Fri Aug 16 13:29:41 PDT 2019
Log file is located at: /oracle/work/middleware_latest/oracle_common/upgrade/logs/ua2019-08-16-13-23-36PM.log
Readiness Check Report File: /oracle/work/middleware_latest/oracle_common/upgrade/logs/readiness2019-08-16-13-29-41PM.txt
Domain Directory: /oracle/work/middleware_1212/user_projects/domains/jrf_domain

Starting readiness check of components.

Oracle Platform Security Services
   Starting readiness check of Oracle Platform Security Services.
     Schema User Name: DEV3_OPSS
     Database Type: Oracle Database
     Database Connect String: 
     VERSION Schema DEV3_OPSS is currently at version 12.1.2.0.0.  Readiness checks will now be performed.
   Starting schema test:  TEST_DATABASE_VERSION  Test that the database server version number is supported for upgrade
     INFO   Database product version: Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production
With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
   Completed schema test: TEST_DATABASE_VERSION --> Test that the database server version number is supported for upgrade +++ PASS
   Starting schema test:  TEST_REQUIRED_TABLES  Test that the schema contains all the required tables
   Completed schema test: TEST_REQUIRED_TABLES --> Test that the schema contains all the required tables +++ PASS
   Starting schema test:  Test that the schema does not contain any unexpected tables  TEST_UNEXPECTED_TABLES
   Completed schema test: Test that the schema does not contain any unexpected tables --> TEST_UNEXPECTED_TABLES +++ Test that the schema does not contain any unexpected tables
   Starting schema test:  TEST_ENOUGH_TABLESPACE  Test that the schema tablespaces automatically extend if full
   Completed schema test: TEST_ENOUGH_TABLESPACE --> Test that the schema tablespaces automatically extend if full +++ PASS
   Starting schema test:  TEST_USER_TABLESPACE_QUOTA  Test that tablespace quota for this user is sufficient to perform the upgrade
   Completed schema test: TEST_USER_TABLESPACE_QUOTA --> Test that tablespace quota for this user is sufficient to perform the upgrade +++ PASS
   Starting schema test:  TEST_ONLINE_TABLESPACE  Test that schema tablespaces are online
   Completed schema test: TEST_ONLINE_TABLESPACE --> Test that schema tablespaces are online +++ PASS
   Starting permissions test:  TEST_DBA_TABLE_GRANTS  Test that DBA user has privilege to view all user tables
   Completed permissions test: TEST_DBA_TABLE_GRANTS --> Test that DBA user has privilege to view all user tables +++ PASS
   Starting schema test:  SEQUENCE_TEST  Test that the Oracle Platform Security Services schema sequence and its properties are valid
   Completed schema test: SEQUENCE_TEST --> Test that the Oracle Platform Security Services schema sequence and its properties are valid +++ PASS
   Finished readiness check of Oracle Platform Security Services with status: SUCCESS.

Oracle Audit Services
   Starting readiness check of Oracle Audit Services.
     Schema User Name: DEV3_IAU
     Database Type: Oracle Database
     Database Connect String: 
     VERSION Schema DEV3_IAU is currently at version 12.1.2.0.0.  Readiness checks will now be performed.
   Starting schema test:  TEST_DATABASE_VERSION  Test that the database server version number is supported for upgrade
     INFO   Database product version: Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production
With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
   Completed schema test: TEST_DATABASE_VERSION --> Test that the database server version number is supported for upgrade +++ PASS
   Starting schema test:  TEST_REQUIRED_TABLES  Test that the schema contains all the required tables
   Completed schema test: TEST_REQUIRED_TABLES --> Test that the schema contains all the required tables +++ PASS
   Starting schema test:  TEST_UNEXPECTED_TABLES  Test that the schema does not contain any unexpected tables
   Completed schema test: TEST_UNEXPECTED_TABLES --> Test that the schema does not contain any unexpected tables +++ PASS
   Starting schema test:  TEST_ENOUGH_TABLESPACE  Test that the schema tablespaces automatically extend if full
   Completed schema test: TEST_ENOUGH_TABLESPACE --> Test that the schema tablespaces automatically extend if full +++ PASS
   Starting schema test:  TEST_USER_TABLESPACE_QUOTA  Test that tablespace quota for this user is sufficient to perform the upgrade
   Completed schema test: TEST_USER_TABLESPACE_QUOTA --> Test that tablespace quota for this user is sufficient to perform the upgrade +++ PASS
   Starting schema test:  TEST_ONLINE_TABLESPACE  Test that schema tablespaces are online
   Completed schema test: TEST_ONLINE_TABLESPACE --> Test that schema tablespaces are online +++ PASS
   Starting permissions test:  TEST_DBA_TABLE_GRANTS  Test that DBA user has privilege to view all user tables
   Completed permissions test: TEST_DBA_TABLE_GRANTS --> Test that DBA user has privilege to view all user tables +++ PASS
   Starting schema test:  TEST_MISSING_COLUMNS  Test that tables and views are not missing any required columns
   Completed schema test: TEST_MISSING_COLUMNS --> Test that tables and views are not missing any required columns +++ PASS
   Starting schema test:  TEST_UNEXPECTED_COLUMNS  Test that tables and views do not contain any unexpected columns
   Completed schema test: TEST_UNEXPECTED_COLUMNS --> Test that tables and views do not contain any unexpected columns +++ PASS
   Starting datatype test for table OIDCOMPONENT:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table OIDCOMPONENT: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table IAU_CUSTOM_01:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table IAU_CUSTOM_01: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table IAU_BASE:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table IAU_BASE: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table WS_POLICYATTACHMENT:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table WS_POLICYATTACHMENT: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table OWSM_PM_EJB:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table OWSM_PM_EJB: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table XMLPSERVER:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table XMLPSERVER: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting datatype test for table SOA_HCFP:  TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes
   Completed datatype test for table SOA_HCFP: TEST_COLUMN_DATATYPES_V2 --> Test that all table columns have the proper datatypes +++ PASS
   Starting schema test:  SEQUENCE_TEST  Test that the audit schema sequence and its properties are valid
   Completed schema test: SEQUENCE_TEST --> Test that the audit schema sequence and its properties are valid +++ PASS
   Starting schema test:  SYNONYMS_TEST  Test that the audit schema required synonyms are present
   Completed schema test: SYNONYMS_TEST --> Test that the audit schema required synonyms are present +++ PASS
   Finished readiness check of Oracle Audit Services with status: FAILURE.

Common Infrastructure Services
   Starting readiness check of Common Infrastructure Services.
     Schema User Name: DEV3_STB
     Database Type: Oracle Database
     Database Connect String: 
   Starting schema test:  TEST_REQUIRED_TABLES  Test that the schema contains all the required tables
   Completed schema test: TEST_REQUIRED_TABLES --> Test that the schema contains all the required tables +++ PASS
   Completed schema test: ALL_TABLES --> TEST_REQUIRED_TABLES +++ Test that the schema contains all the required tables
   Starting schema test:  TEST_UNEXPECTED_TABLES  Test that the schema does not contain any unexpected tables
   Completed schema test: ALL_TABLES --> TEST_UNEXPECTED_TABLES +++ Test that the schema does not contain any unexpected tables
   Starting schema test:  TEST_REQUIRED_VIEWS  Test that the schema contains all the required database views
   Completed schema test: ALL_TABLES --> TEST_REQUIRED_VIEWS +++ Test that the schema contains all the required database views
   Starting schema test:  TEST_MISSING_COLUMNS  Test that tables and views are not missing any required columns
   Completed schema test: ALL_TABLES --> TEST_MISSING_COLUMNS +++ Test that tables and views are not missing any required columns
   Starting schema test:  TEST_DATABASE_VERSION  Test that the database server version number is supported for upgrade
   Starting schema test:  TEST_DATABASE_VERSION  Test that the database server version number is supported for upgrade
     INFO   Database product version: Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production
With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
   Completed schema test: TEST_DATABASE_VERSION --> Test that the database server version number is supported for upgrade +++ PASS
   Completed schema test: ALL_TABLES --> TEST_DATABASE_VERSION +++ Test that the database server version number is supported for upgrade
   Finished readiness check of Common Infrastructure Services with status: SUCCESS.

Oracle JRF
   Starting readiness check of Oracle JRF.
   Finished readiness check of Oracle JRF with status: SUCCESS.

System Components Infrastructure
   Starting readiness check of System Components Infrastructure.
   Starting config test:  TEST_SOURCE_CONFIG  Checking the source configuration.
     INFO /oracle/work/middleware_1212/user_projects/domains/jrf_domain/opmn/topology.xml was not found. No upgrade is needed.
   Completed config test: TEST_SOURCE_CONFIG --> Checking the source configuration. +++ PASS
   Finished readiness check of System Components Infrastructure with status: ALREADY_UPGRADED.

Common Infrastructure Services
   Starting readiness check of Common Infrastructure Services.
   Starting config test:  CIEConfigPlugin.readiness.test  This tests the readiness of the domain from CIE side.
   Completed config test: CIEConfigPlugin.readiness.test --> This tests the readiness of the domain from CIE side. +++ PASS
   Finished readiness check of Common Infrastructure Services with status: SUCCESS.

Finished readiness check of components.

Parent topic: Running a Pre-Upgrade Readiness Check

Stopping Servers and Processes

Before you run the Upgrade Assistant to upgrade your schemas and configurations, you must shut down all of the pre-upgrade processes and servers, including the Administration Server and any managed servers.

An Oracle Fusion Middleware environment can consist of an Oracle WebLogic Server domain, an Administration Server, multiple managed servers, Java components, system components such as Identity Management components, and a database used as a repository for metadata. The components may be dependent on each other, so they must be stopped in the correct order.

Note:

The procedures in this section describe how to stop the existing, pre-upgrade servers and processes using the WLST command-line utility or a script. You can also use the Oracle Fusion Middleware Control and the Oracle WebLogic Server Administration Console. See Starting and Stopping Administration and Managed Servers and Node Manager.

To stop your pre-upgrade Fusion Middleware environment, navigate to the pre-upgrade domain and follow the steps below:

Step 1: Stop the Managed Servers

To stop a WebLogic Server Managed Server, use the stopManagedWebLogic script:

  • (UNIX) EXISTING_DOMAIN_HOME/bin/stopManagedWebLogic.sh managed_server_name admin_url

  • (Windows) EXISTING_DOMAIN_HOME\bin\stopManagedWebLogic.cmd managed_server_name admin_url

When prompted, enter your user name and password.

Step 2: Stop System Components

To stop system components, such as Oracle HTTP Server, use the stopComponent script:

  • (UNIX) EXISTING_DOMAIN_HOME/bin/stopComponent.sh component_name

  • (Windows) EXISTING_DOMAIN_HOME\bin\stopComponent.cmd component_name

You can stop system components in any order.

Step 3: Stop the Administration Server

When you stop the Administration Server, you also stop the processes running in the Administration Server, including the WebLogic Server Administration Console and Fusion Middleware Control.

To stop the Administration Server, use the stopWebLogic script:

  • (UNIX) EXISTING_DOMAIN_HOME/bin/stopWebLogic.sh

  • (Windows) EXISTING_DOMAIN_HOME\bin\stopWebLogic.cmd

When prompted, enter your user name, password, and the URL of the Administration Server.

Step 4: Stop Node Manager

To stop Node Manager, close the command shell in which it is running.

Alternatively, after setting the nodemanager.properties attribute QuitEnabled to true (the default is false), you can use WLST to connect to Node Manager and shut it down. See stopNodeManager in Oracle Fusion Middleware WLST Command Reference for WebLogic Server.

Parent topic: Upgrading Oracle Universal Records Management from 11g to 12c

Upgrading Product Schemas

After stopping servers and processes, use the Upgrade Assistant to upgrade supported product schemas to the current release of Oracle Fusion Middleware.

The Upgrade Assistant allows you to upgrade individually selected schemas or all schemas associated with a domain. The option you select determines which Upgrade Assistant screens you will use.

Parent topic: Upgrading Oracle Universal Records Management from 11g to 12c

Starting the Upgrade Assistant

Run the Upgrade Assistant to upgrade product schemas, domain component configurations, or standalone system components to 12c (12.2.1.4.0).

To start the Upgrade Assistant:

Note:

Before you start the Upgrade Assistant, make sure that the JVM character encoding is set to UTF-8 for the platform on which the Upgrade Assistant is running. If the character encoding is not set to UTF-8, then you will not be able to download files containing Unicode characters in their names. This can cause the upgrade to fail.

  1. Go to the oracle_common/upgrade/bin directory:
    • (UNIX) ORACLE_HOME/oracle_common/upgrade/bin
    • (Windows) ORACLE_HOME\oracle_common\upgrade\bin
  2. Start the Upgrade Assistant:
    • (UNIX) ./ua
    • (Windows) ua.bat

For information about other parameters that you can specify on the command line, such as logging parameters, see:

Parent topic: Upgrading Product Schemas

Upgrade Assistant Parameters

When you start the Upgrade Assistant from the command line, you can specify additional parameters.

Table 8-4 Upgrade Assistant Command-Line Parameters

Parameter Required or Optional Description

-readiness

 Required for readiness checks

Note: Readiness checks cannot be performed on standalone installations (those not managed by the WebLogic Server).

Performs the upgrade readiness check without performing an actual upgrade.

Schemas and configurations are checked.

Do not use this parameter if you have specified the -examine parameter.

-threads

Optional

Identifies the number of threads available for concurrent schema upgrades or readiness checks of the schemas.

The value must be a positive integer in the range 1 to 8. The default is 4.

-response

Required for silent upgrades or silent readiness checks

Runs the Upgrade Assistant using inputs saved to a response file generated from the data that is entered when the Upgrade Assistant is run in GUI mode. Using this parameter runs the Upgrade Assistant in silent mode (without displaying Upgrade Assistant screens).

-examine

Optional

Performs the examine phase but does not perform an actual upgrade.

Do not specify this parameter if you have specified the -readiness parameter.

-logLevel attribute

Optional

Sets the logging level, specifying one of the following attributes:

  • TRACE

  • NOTIFICATION

  • WARNING

  • ERROR

  • INCIDENT_ERROR

The default logging level is NOTIFICATION.

Consider setting the -logLevel TRACE attribute to so that more information is logged. This is useful when troubleshooting a failed upgrade. The Upgrade Assistant's log files can become very large if -logLevel TRACE is used.

-logDir location

Optional

Sets the default location of upgrade log files and temporary files. You must specify an existing, writable directory where the Upgrade Assistant creates log files and temporary files.

The default locations are:

(UNIX)

ORACLE_HOME/oracle_common/upgrade/logs
ORACLE_HOME/oracle_common/upgrade/temp

(Windows)

ORACLE_HOME\oracle_common\upgrade\logs
ORACLE_HOME\oracle_common\upgrade\temp

-help

Optional

Displays all of the command-line options.

Upgrading Product Schemas Using the Upgrade Assistant

Navigate through the screens in the Upgrade Assistant to upgrade the product schemas.

To upgrade the 11g schemas:
  1. On the Welcome screen, review an introduction to the Upgrade Assistant and information about important pre-upgrade tasks. Click Next.

    Note:

    For more information about any Upgrade Assistant screen, click Help on the screen.
  2. On All Schemas screen, select the All Schemas Used by a Domain option.
    This option allows the Upgrade Assistant to discover and select all components that have a schema available to upgrade in the domain specified in the Domain Directory field. This is also known as a domain assisted schema upgrade. Additionally, the Upgrade Assistant pre-populates connection information on the schema input screens.
    Specify the path to the DOT9 domain in the Domain Directory field.

    Note:

    Oracle recommends that you select All Schemas Used by a Domain for most upgrades to ensure all of the required schemas are included in the upgrade.
    Click Next.
  3. If you selected All Schemas Used by a Domain: On the Component List screen you will see two lists of schemas. The first list shows the components whose schemas are present in the domain and will be upgraded. The second list shows the list of missing schemas that may need to be created. If none of the required schemas are missing, you will only see the first list. Review both lists and click Next.
    The Upgrade Assistant will attempt to create any missing schemas using the schema credentials used to create the existing domain schemas. You do not need to launch the Repository Creation Utility.
    If you want to exclude some components or schemas from the list, navigate back to the All Schemas screen and select Individually Selected Schemas. This option allows you to select only those schemas you want included in the upgrade.
  4. On the Prerequisites screen, acknowledge that the prerequisites have been met by selecting all the check boxes. Click Next.

    Note:

    The Upgrade Assistant does not verify whether the prerequisites have been met.
  5. On the Create Schemas screen, indicate whether you want the Upgrade Assistant to create the missing schemas for the domain. You cannot perform an upgrade if any required schemas are missing.
    The Create missing schemas for the specified domain option is enabled by default. The Upgrade Assistant will attempt to create the missing schemas for the domain using the database connection details and schema owner name provided.
    If the same password is used for all schemas select Use same passwords for all schemas. Enter and confirm the password in the table. You only have to specify the password once.
    If you do not want the Upgrade Assistant to create these schemas for you, deselect this option and click Next. You will have to run the Repository Creation Utility (RCU) to create the schemas.
  6. The Create Schemas Default screen appears if you have chosen to create the schemas in this session of the Upgrade Assistant.

    Note:

    The schemas are created with the default tablespace settings. If you want to customize the tablespace settings for your schemas, then create the required schemas with the RCU.
  7. On the Examine screen, review the status of the Upgrade Assistant as it examines each schema, verifying that the schema is ready for upgrade. If the status is Examine finished, click Next.
    If the examine phase fails, Oracle recommends that you cancel the upgrade by clicking No in the Examination Failure dialog. Click View Log to see what caused the error and refer to Troubleshooting Your Upgrade in Oracle Fusion Middleware Upgrading with the Upgrade Assistant for information on resolving common upgrade errors.

    Note:

    • If you resolve any issues detected during the examine phase without proceeding with the upgrade, you can start the Upgrade Assistant again without restoring from backup. However, if you proceed by clicking Yes in the Examination Failure dialog box, you need to restore your pre-upgrade environment from backup before starting the Upgrade Assistant again.

    • Canceling the examination process has no effect on the schemas or configuration data; the only consequence is that the information the Upgrade Assistant has collected must be collected again in a future upgrade session.

  8. On the Upgrade Summary screen, review the summary of the schemas that will be upgraded and/or created.
    Verify that the correct Source and Target Versions are listed for each schema you intend to upgrade.
    If you want to save these options to a response file to run the Upgrade Assistant again later in response (or silent) mode, click Save Response File and provide the location and name of the response file. A silent upgrade performs exactly the same function that the Upgrade Assistant performs, but you do not have to manually enter the data again.
    Click Next .
  9. The Create Schemas Progress screen displays the progress and the status of the schemas that are created. When complete, click Upgrade.
  10. On the Upgrade Progress screen, monitor the status of the upgrade.

    Caution:

    Allow the Upgrade Assistant enough time to perform the upgrade. Do not cancel the upgrade operation unless absolutely necessary. Doing so may result in an unstable environment.
    If any schemas are not upgraded successfully, refer to the Upgrade Assistant log files for more information.

    Note:

    The progress bar on this screen displays the progress of the current upgrade procedure. It does not indicate the time remaining for the upgrade.

    Click Next.

  11. If the schema upgrade is successful, a summary file is generated at the following location:
    NEW_ORACLE_HOME/oracle_common/upgrade/logs/
    If the schema upgrade fails, you can review the logs for possible errors. The log file is generated at the following location:
    NEW_ORACLE_HOME/oracle_common/upgrade/logs
    Click Close to close the Upgrade Assistant.

Parent topic: Upgrading Product Schemas

Verifying the Schema Upgrade

After completing all the upgrade steps, verify that the upgrade was successful by checking that the schema version in schema_version_registry has been properly updated.

If you are using an Oracle database, connect to the database as a user having Oracle DBA privileges, and run the following from SQL*Plus to get the current version numbers: 

SET LINE 120
COLUMN MRC_NAME FORMAT A14
COLUMN COMP_ID FORMAT A20
COLUMN VERSION FORMAT A12
COLUMN STATUS FORMAT A9
COLUMN UPGRADED FORMAT A8
SELECT MRC_NAME, COMP_ID, OWNER, VERSION, STATUS, UPGRADED FROM SCHEMA_VERSION_REGISTRY ORDER BY MRC_NAME, COMP_ID ;

In the query result:

  • Check that the number in the VERSION column matches the latest version number for that schema. For example, verify that the schema version number is 12.2.1.4.0 . Note, however, that not all schema versions will be updated. The URM schema version will be displayed as 12.2.1.0.0 instead of 12.2.1.4.0.

  • The STATUS field will be either UPGRADING or UPGRADED during the schema patching operation, and will become VALID when the operation is completed.

  • If the status appears as INVALID, the schema update failed. You should examine the logs files to determine the reason for the failure.

  • Synonym objects owned by IAU_APPEND and IAU_VIEWER will appear as INVALID, but that does not indicate a failure.

    They become invalid because the target object changes after the creation of the synonym. The synonyms objects will become valid when they are accessed. You can safely ignore these INVALID objects.

Parent topic: Upgrading Product Schemas

About Reconfiguring the Domain

Run the Reconfiguration Wizard to reconfigure your domain component configurations to 12c (12.2.1.4.0).

Note:

If the source is a clustered environment, run the Reconfiguration Wizard on the primary node only.

When you reconfigure a WebLogic Server domain, the following items are automatically updated, depending on the applications in the domain:

  • WebLogic Server core infrastructure

  • Domain version

Note:

Before you begin the domain reconfiguration, note the following limitations:

  • The Reconfiguration Wizard does not update any of your own applications that are included in the domain.

  • Transforming a non-dynamic cluster domain to a dynamic cluster domain during the upgrade process is not supported.

    The dynamic cluster feature is available when running the Reconfiguration Wizard, but Oracle only supports upgrading a non-dynamic cluster upgrade and then adding dynamic clusters. You cannot add dynamic cluster during the upgrade process.

  • If the installation that you’re upgrading does not use Oracle Access Management (OAM), then you must edit two files to prevent the Reconfiguration Wizard from attempting to update the nonexistent OAM Infrastructure schema, which causes the upgrade to fail.

    Comment out the lines in your $DOMAIN/init-info/domain-info.xml that are similar to this example: 

    <!--extention-template-ref name="Oracle Identity Navigator" 
  version="11.1.1.3.0" 
  location="/u01/app/oracle/product/fmw/iam111130/common/templates/applications/yourcomany.oinav_11.1.1.3.0_template.jar" 
  symbol=""/-->

<!--install-comp-ref name="oracle.idm.oinav" version="11.1.1.3.0" 
  symbol="yourcompany.idm.oinav_11.1.1.3.0_iam111130_ORACLE_HOME" 
  product_home="/u01/app/oracle/product/fmw/iam111130"/-->

    and similarly comment out the lines in $DOMAIN/config/config.xml that are similar to this example: 

    <!--app-deployment> 
  <name>oinav#11.1.1.3.0</name>
  <target>AdminServer</target>
  <module-type>ear</module-type>

  <source-path>/u01/app/oracle/product/fmw/iam111130/oinav/modules/oinav.ear_11.1.1.3.0/oinav.ear</source-path>
  <deployment-order>500</deployment-order>
  <security-dd-model>DDOnly</security-dd-model>
  <staging-mode>nostage</staging-mode>
</app-deployment-->
Specifically, when you reconfigure a domain, the following occurs:

  • The domain version number in the config.xml file for the domain is updated to the Administration Server's installed WebLogic Server version.

  • Reconfiguration templates for all installed Oracle products are automatically selected and applied to the domain. These templates define any reconfiguration tasks that are required to make the WebLogic domain compatible with the current WebLogic Server version.

  • Start scripts are updated.

    If you want to preserve your modified start scripts, be sure to back them up before starting the Reconfiguration Wizard.

Note:

When the domain reconfiguration process starts, you can’t undo the changes that it makes. Before running the Reconfiguration Wizard, ensure that you have backed up the domain as covered in the pre-upgrade checklist. If an error or other interruption occurs while running the Reconfiguration Wizard, you must restore the domain by copying the files and directories from the backup location to the original domain directory. This is the only way to ensure that the domain has been returned to its original state before reconfiguration.

Follow these instructions to reconfigure the existing domain using the Reconfiguration Wizard. See Reconfiguring WebLogic Domains in Oracle Fusion Middleware Upgrading Oracle WebLogic Server.

Parent topic: Upgrading Oracle Universal Records Management from 11g to 12c

Backing Up the Domain

Before running the Reconfiguration Wizard, create a backup copy of the domain directory.

To create a backup of the domain directory:

  1. Copy the source domain to a separate location to preserve the contents.
    (Windows) copy C:\domains\mydomain to C:\domains\mydomain_backup.
    (UNIX) cp mydomain /domains/mydomain_backup
  2. Before updating the domain on each remote Managed Server, create a backup copy of the domain directory on each remote machine.
  3. Verify that the backed up versions of the domain are complete.
If domain reconfiguration fails for any reason, you must copy all files and directories from the backup directory into the original domain directory to ensure that the domain is returned entirely to its original state before reconfiguration.

Parent topic: About Reconfiguring the Domain

Starting the Reconfiguration Wizard

Note:

Shut down the administration server and all collocated managed servers before starting the reconfiguration process. See Stopping Servers and Processes.

To start the Reconfiguration Wizard in graphical mode:

  1. Sign in to the system on which the domain resides.
  2. Open the command shell (on UNIX operating systems) or open a command prompt window (on Windows operating systems).
  3. Edition Based Database Users Only: If your schemas are configured with EBR database, a default edition name must be manually supplied before you run the Reconfiguration Wizard.
    Run the following SQL command to set the default edition:

    ALTER DATABASE DEFAULT EDITION = edition_name;

    where edition_name is the child edition name.

  4. Go to the oracle_common/common/bin directory:
    • (UNIX) NEW_ORACLE_HOME/oracle_common/common/bin
    • (Windows) NEW_ORACLE_HOME\oracle_common\commom\bin
  5. Start the Reconfiguration Wizard with the following logging options:
    • (UNIX) ./reconfig.sh -log=log_file -log_priority=ALL
    • (Windows) reconfig.cmd -log=log_file -log_priority=ALL

    where log_file is the absolute path of the log file you'd like to create for the domain reconfiguration session. This can be helpful if you need to troubleshoot the reconfiguration process.

    The parameter -log_priority=ALL ensures that logs are logged in fine mode.

    Note:

    When you run this command, the following error message might appear to indicate that the default cache directory is not valid:

    *sys-package-mgr*: can't create package cache dir

    You can change the cache directory by setting the environment variable CONFIG_JVM_ARGS. For example:

    CONFIG_JVM_ARGS=-Dpython.cachedir=valid_directory

Parent topic: About Reconfiguring the Domain

Reconfiguring the WebCenter Content Domain with the Reconfiguration Wizard

Navigate through the screens in the Reconfiguration Wizard to reconfigure your existing domain.

Note:

Reconfiguration templates are automatically selected for every Oracle product that is installed, and are applied to the domain. These templates define any reconfiguration tasks that are required to make the WebLogic domain compatible with the current WebLogic Server version. If you see a template that is reported as missing, verify whether you have installed that respective Oracle product in your domain. For example, if Oracle HTTP Server is part of your existing domain, ensure that you install the 12c (12.2.1.4.0) Oracle HTTP Server product distribution.

Note:

  • If the source is a clustered environment, run the Reconfiguration Wizard on the primary node only. Use the pack/unpack utility to apply the changes to other cluster members in the domain.

  • When you upgrade a scaled out domain (with URM servers) to the 12c release, URM server groups are not auto populated with the URM server on the second node. The URM server on the second node is not added to the URM server group. As user-expandable server groups are visible on the managed server panel, users will see that the server on the first node is a member of the group, but not the server on the second node. However, this second server will still be a member of the same cluster. So, the same applications and services are deployed on this server when it starts as a cluster member.

To reconfigure the domain with the Reconfiguration Wizard:
  1. On the Select Domain screen, specify the location of the domain you want to upgrade or click Browse to navigate and select the domain directory. Click Next.
  2. On the Reconfiguration Setup Progress screen, view the progress of the setup process. When complete, click Next.
    During this process:

    • The reconfiguration templates for your installed products, including Fusion Middleware products, are automatically applied. This updates various domain configuration files such as config.xml, config-groups.xml, and security.xml (among others).

    • Schemas, scripts, and other such files that support your Fusion Middleware products are updated.

    • The domain upgrade is validated.

  3. The Reconfig Summary screen displays the list of templates that are reconfigured by the Reconfiguration Wizard. Click Next.
  4. On the Domain Mode and JDK screen, select the JDK to use in the domain or click Browse to navigate to the JDK you want to use. The supported JDK version for 12c (12.2.1.4.0) is 1.8.0_211 and later. Click Next.

    Note:

    You cannot change the Domain Mode at this stage.
    For a list of JDKs that are supported for a specific platform, see Oracle Fusion Middleware Supported System Configurations.
  5. (Available for domains containing only URM or both URM and UCM) On the Datasources screen, specify the service name, host name, port number and user name for URMDS datasource, and click Next.
  6. (Available for domains containing only URM or both URM and UCM) On the JDBC DS Test screen, click Test Selected Connections to test the connection for each schema.
  7. On the Database Configuration Type screen, select RCU Data to connect to the Server Table (_STB) schema.
    Enter the database connection details using the RCU service table (_STB) schema credentials and click Get RCU Configuration.
    The Reconfiguration Wizard uses this connection to automatically configure the data sources required for components in your domain.

    Note:

    For any existing 11g datasource, the reconfiguration will preserve the existing values. For new datasources where the schema was created for 12c by the RCU, the default connection data will be retrieved from the _STB schema. If no connection data for a given schema is found in the _STB schema, then the default connection data is used.
    If the check is successful, click Next. If the check fails, reenter the connection details correctly and try again.

    Note:

    If you are upgrading from 11g, and your database has _OPSS or _IAU 11g, and URM database schemas, you must manually enter database connection details for those schemas. These schemas were not required in 11g and had to be created manually. Users could assign any name to these schemas, therefore the Reconfiguration Wizard does not recognize them. When providing connection information for _IAU, use the IAU_APPEND user information.
  8. On the JDBC Component Schema screen, verify that the DBMS/Service and the Host name is correct for each component schema and click Next.
  9. On the JDBC Component Schema Test screen, select all the component schemas and click Test Selected Connections to test the connection for each schema. The result of the test is indicated in the Status column.
    When the check is complete, click Next.
  10. On the Node Manager screen, select Per Domain Default Location as the Node Manager Type. Select Create New Configuration, specify the Node Manager Credentials, and click Next.
  11. On the Advanced Configuration screen, you can select all categories for which you want to perform advanced configuration. For each category you select, the appropriate configuration screen is displayed to allow you to perform advanced configuration.

    Note:

    The categories that are listed on the Advanced Configuration screen depend on the resources defined in the templates you selected for the domain.
    For this upgrade, select none of the options and click Next.
  12. On the Configuration Summary screen, review the detailed configuration settings of the domain before continuing.
    You can limit the items that are displayed in the right-most panel by selecting a filter option from the View drop-down list.
    To change the configuration, click Back to return to the appropriate screen. To reconfigure the domain, click Reconfig.

    Note:

    The location of the domain does not change when you reconfigure it.
  13. The Reconfiguration Progress screen displays the progress of the reconfiguration process.
    During this process:

    • Domain information is extracted, saved, and updated.

    • Schemas, scripts, and other such files that support your Fusion Middleware products are updated.

    When the progress bar shows 100%, click Next.
  14. The End of Configuration screen indicates whether the reconfiguration process completed successfully or failed. It also displays the location of the domain that was reconfigured as well as the Administration Server URL (including the listen port). If the reconfiguration is successful, it displays Oracle WebLogic Server Reconfiguration Succeeded.
    If the reconfiguration process did not complete successfully, an error message is displayed indicates the reason. Take appropriate action to resolve the issue. If you cannot resolve the issue, contact My Oracle Support.
    Note the Domain Location and the Admin Server URL for further operations.

Parent topic: About Reconfiguring the Domain

Starting Servers and Processes

After a successful upgrade, restart all processes and servers, including the Administration Server and any Managed Servers.

The components may be dependent on each other so they must be started in the correct order.

Note:

The procedures in this section describe how to start servers and process using the WLST command line or a script. You can also use the Oracle Fusion Middleware Control and the Oracle WebLogic Server Administration Console. See Starting and Stopping Administration and Managed Servers and Node Manager in Administering Oracle Fusion Middleware.

To start your Fusion Middleware environment, follow the steps below:

Step 1: Start the Administration Server

When you start the Administration Server, you also start the processes running in the Administration Server, including the WebLogic Server Administration Console and Fusion Middleware Control.

To start the Administration Server, use the startWebLogic script:

  • (UNIX) NEW_DOMAIN_HOME/bin/startWebLogic.sh

  • (Windows) NEW_DOMAIN_HOME\bin\startWebLogic.cmd

When prompted, enter your user name, password, and the URL of the Administration Server.

Step 2: Start Node Manager

To start Node Manager, use the startNodeManager script:

  • (UNIX) NEW_DOMAIN_HOME/bin/startNodeManager.sh

  • (Windows) NEW_DOMAIN_HOME\bin\startNodeManager.cmd

Step 3: Start the Managed Servers

To start a WebLogic Server Managed Server, use the startManagedWebLogic script:

  • (UNIX) NEW_DOMAIN_HOME/bin/startManagedWebLogic.sh managed_server_name admin_url

  • (Windows) NEW_DOMAIN_HOME\bin\startManagedWebLogic.cmd managed_server_name admin_url

When prompted, enter your user name and password.

Note:

The startup of a Managed Server will typically start the applications that are deployed to it. Therefore, it should not be necessary to manually start applications after the Managed Server startup.

Step 4: Start System Components

To start system components, such as Oracle HTTP Server, use the startComponent script:

  • (UNIX) NEW_DOMAIN_HOME/bin/startComponent.sh component_name

  • (Windows) NEW_DOMAIN_HOME\bin\startComponent.cmd component_name

You can start system components in any order.

Parent topic: Upgrading Oracle Universal Records Management from 11g to 12c

Verifying the Upgrade

After you have upgraded a domain containing URM and/or from 11g to 12c, you should be able to access the 12c UCM server using the URLs depending upon the component that you upgraded.

If you have upgraded UCM from 11g to 12c, you should be able to access the 12c UCM server through the following URL: http://host:16200/cs.

If you have upgraded URM from 11g to 12c, you should be able to access the 12c URM server through the following URL: http://host:16300/urm.

Note:

In 12c, URM is re-established as UCM. However, the 12.2.1.4.0 UCM server will continue to use the URMSERVER database schema and /urm as the HttpRelativeWebRoot.

Parent topic: Upgrading Oracle Universal Records Management from 11g to 12c