1. Installing and Configuring Oracle HTTP Server
  2. Configuring Oracle HTTP Server WebGate for Oracle Access Manager

B Configuring Oracle HTTP Server WebGate for Oracle Access Manager

You can configure Oracle HTTP Server WebGate that acts as a web server plug-in to intercept and forward HTTP requests to an an existing Oracle Access Manager instance for authentication and authorization.

About Webgate

WebGate is a web server plug-in that intercepts HTTP requests and forwards them to an existing Oracle Access Manager instance for authentication and authorization.

For Oracle Fusion Middleware 12c, the Oracle WebGate software is installed as part of the Oracle HTTP Server 12c software installation. See Registering and Managing OAM 11g Agents in Adminstrator’s Guide for Oracle Access Management.

Parent topic: Configuring Oracle HTTP Server WebGate for Oracle Access Manager

General Prerequisites for Configuring Oracle HTTP Server WebGate

Before you can configure Oracle HTTP Server WebGate, you must have installed and configured a certified version of Oracle Access Manager.

For the most up-to-date information, see the certification document for your release on the Oracle Fusion Middleware Supported System Configurations page.

For WebGate certification matrix, click and open http://www.oracle.com/technetwork/middleware/id-mgmt/downloads/oam-webgates-2147084.html, then click the Certification Matrix for 12c Access Management WebGates link to download the certification matrix spreadsheet.

Note:

For production environments, it is highly recommended that you install Oracle Access Manager in its own environment and not on the machines that are hosting the enterprise deployment.

For more information about Oracle Access Manager, see the latest Oracle Identity and Access Management documentation, which you can find in the Middleware documentation on the Oracle Help Center.

Parent topic: Configuring Oracle HTTP Server WebGate for Oracle Access Manager

Configuring Oracle HTTP Server WebGate

Configuring Oracle HTTP Server WebGate for Oracle Access Manager requires several steps.

In the following examples:

  • Replace OHS_ORACLE_HOME with the complete path to the Oracle home where you installed the Oracle HTTP Server software.

  • Replace OHS_Configuration_Staging_Directory with the path to the following location in the Oracle HTTP Server domain home:
    OHS_Configuration_Staging_Directory/config/fmwconfig/components/OHS/componentName

  1. Change to deployWebGate directory in the Oracle HTTP Server.

    (UNIX)OHS_ORACLE_HOME/webgate/ohs/tools/deployWebGate

    (Windows)OHS_ORACLE_HOME\webgate\ohs\tools\deployWebGate

  2. To create the WebGate Instance directory and enable WebGate logging on OHS Instance, enter the following command::

    (UNIX) ./deployWebGateInstance.sh -w DOMAIN_HOME -oh OHS_ORACLE_HOME

    (Windows) deployWebGateInstance.bat -w DOMAIN_HOME -oh OHS_ORACLE_HOME

  3. Verify that a webgate directory and subdirectories was created by the deployWebGateInstance command:

    For example, on UNIX:

    ls -lart DOMAIN_HOME/webgate/
total 6
drwxr-x---+ 8 orcl oinstall 20 Oct  2 07:14 ..
drwxr-xr-x+ 4 orcl oinstall  4 Oct  2 07:14 .
drwxr-xr-x+ 3 orcl oinstall  3 Oct  2 07:14 tools
drwxr-xr-x+ 3 orcl oinstall  4 Oct  2 07:14 config

  4. To change set the PATH environment variable, enter the following command::

    (UNIX) export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:OHS_ORACLE_HOME/lib

    (Windows) set PATH=%PATH%;OHS_ORACLE_HOME\bin

  5. Change to the EditHttpConf directory:

    (UNIX) OHS_ORACLE_HOME/webgate/ohs/tools/EditHttpConf

    (Windows) OHS_ORACLE_HOME\webgate\ohs\tools\EditHttpConf

  6. Enter the following command from the InstallTools directory:

    (UNIX) ./EditHttpConf -w DOMAIN_HOME [-oh OHS_ORACLE_HOME] [-o output_file_name] [-dcc custom_dcc_scripts/pages_location]

    (Windows) EditHttpConf -w DOMAIN_HOME [-oh OHS_ORACLE_HOME] [-o output_file_name] [-dcc custom_dcc_scripts\pages_location]

    This command does the following:

    • Copies the apache_webgate.template file from the Oracle HTTP Server Oracle home to a new webgate.conf file in the Oracle HTTP Server configuration directory.

    • Updates the httpd.conf file to add one line, so it includes the webgate.conf.

    • Generates a WebGate configuration file. The default name of the file is webgate.conf, but you can use a custom name by using the output_file argument to the command.

If you want to customize Detached Credential Collector (DCC) scripts or pages, such as the oamsso/logout.html, oamsso-bin/login.p, or logout.pll scripts), then you can copy these scripts from the following location to the custom location identified by the -dcc parameter to EditHttpConf utility:
ORACLE_HOME/webgate/ohs/

Parent topic: Configuring Oracle HTTP Server WebGate for Oracle Access Manager

Registering the Oracle HTTP Server WebGate with Oracle Access Manager

You can register the WebGate agent with Oracle Access Manager by using the Oracle Access Manager Administration console.

For more information about OAM registration, see Registering an OAM Agent Using the Console in Administrator's Guide for Oracle Access Management.

Parent topic: Configuring Oracle HTTP Server WebGate for Oracle Access Manager

Locating and Preparing the RREG Tool

To set up the RREG tool, complete the following steps:

  1. Sign in to one of the Oracle Access Manager hosts in the Application tier.

  2. Change to the following directory in the Oracle Access Manager Oracle home:

    OAM_ORACLE_HOME/oam/server/rreg/client

    Note:

    The location is required only for the out-of-band mode.

    In this example, OAM_ORACLE_HOME refers to the Oracle home on the system where the Oracle Access Manager software was installed.

    Note:

    If the Oracle Enterprise Deployment Guide for IDM was used, OAM_ORACLE_HOME may be /u01/oracle/products/access/iam.

    Note:

    If you do not have privileges or access to the Oracle Access Manager server, then you can use out-of-band mode to generate the required files and register the WebGate with Oracle Access Manager. See About RREG In-Band and Out-of-Band Mode.

  3. Decompress the RREG.tar.gz file to the required directory.

  4. From the unzipped directory, open the oamreg.sh file and set the following environment variables in the file, as follows:

    • Set OAM_REG_HOME to the absolute path to the directory in which you extracted the contents of RREG archive.

      Set JAVA_HOME to the absolute path of the directory in which a supported JDK is installed on your machine.

Parent topic: Registering the Oracle HTTP Server WebGate with Oracle Access Manager

Updating the Standard Properties in the OAM11gRequest.xml File

Before you can register the Webgate agent with Oracle Access Manager, you must update some required properties in the OAM11gRequest.xml file.

Note:

If you plan to use the default values for most of the parameters in the provided XML file, then you can use the shorter version (OAM11gRequest_short.xml, in which all non-listed fields will take a default value.

Note:

In the primary server list, the default names are mentioned as OAM_SERVER1 and OAM_SERVER2 for OAM servers. Rename these names in the list if the server names are changed in your environment.

To perform this task:

  1. If you are using in-band mode, then change directory to the following location in the directory:

    OAM_ORACLE_HOME/oam/server/rreg/input

    If you are using out-of-band mode, then change directory to the location where you unpacked the RREG archive.

  2. Make a copy of the OAM11GRequest.xml file template.

  3. Review the properties listed in the file, and then update your copy of the OAM11GRequest.xml file to make sure the properties reference the host names and other values specific to your environment.

OAM11gRequest.xml Property Set to...
serverAddress

The host and the port of the Administration Server for the Oracle Access Manager domain.
agentName

Any custom name for the agent. Typically, you use a name that identifies the Fusion Middleware product you are configuring for single sign-on.
applicationDomain

A value that identifies the Web tier host and the FMW component you are configuring for single sign-on.

security

The security mode of the Oracle Access Manager server, which can be open, simple, or certificate mode.

For an enterprise deployment, Oracle recommends simple mode, unless additional requirements exist to implement custom security certificates for the encryption of authentication and authorization traffic.

In most cases, avoid using open mode, because in open mode, traffic to and from the Oracle Access Manager server is not encrypted.

For more information using certificate mode or about Oracle Access Manager supported security modes in general, see Securing Communication Between OAM Servers and WebGates in the Administrator's Guide for Oracle Access Management.

cachePragmaHeader

private
cacheControlHeader

private
ipValidation

0

<ipValidation>0<ipValidation>
ipValidationExceptions

The IP address of the front-end load balancer. For example:

<ipValidationExceptions>
	<ipAddress>130.35.165.42</ipAddress>
</ipValidation>
agentBaseUrl

The host and the port of the machine on which Oracle HTTP Server 12c WebGate is installed.

Parent topic: Registering the Oracle HTTP Server WebGate with Oracle Access Manager

Running the RREG Tool

The following topics provide information about running the RREG tool to register your Oracle HTTP Server Webgate with Oracle Access Manager.

Parent topic: Registering the Oracle HTTP Server WebGate with Oracle Access Manager

About RREG In-Band and Out-of-Band Mode

You can run the RREG Tool in one of two modes: in-band and out-of-band.

Use in-band mode when you have the privileges to access the Oracle Access Manager server and run the RREG tool yourself from the Oracle Access Manager Oracle home. You can then copy the generated artifacts and files to the Web server configuration directory after you run the RREG Tool.

Use out-of-band mode if you do not have privileges or access to the Oracle Access Manager server. For example, in some organizations, only the Oracle Access Manager server administrators have privileges access the server directories and perform administration tasks on the server. In out-of-band mode, the process can work as follows:

  1. The Oracle Access Manager server administrator provides you with a copy of the RREG archive file (RREG.tar.gz).

  2. Untar the RREG.tar.gz file that was provided to you by the server administrator.

    For example:

    gunzip RREG.tar.gz

    tar -xvf RREG.tar

    After you unpack the RREG archive, you can find the tool for registering the agent in the following location:

    RREG_HOME/bin/oamreg.sh

    In this example, RREG_Home is the directory in which you extracted the contents of RREG archive.

  3. Use the instructions in Updating the Standard Properties in the OAM11gRequest.xml File to update the OAM11GRequest.xml file, and send the completed OAM11GRequest.xml file to the Oracle Access Manager server administrator.

  4. The Oracle Access Manager server administrator then uses the instructions in Running the RREG Tool in Out-Of-Band Mode to run the RREG Tool and generate the AgentID_response.xml file.

  5. The Oracle Access Manager server administrator sends the AgentID_response.xml file to you.

  6. Use the instructions in Running the RREG Tool in Out-Of-Band Mode to run the RREG Tool with the AgentID_response.xml file and generate the required artifacts and files on the client system.

Parent topic: Running the RREG Tool

Running the RREG Tool in In-Band Mode

To run the RREG Tool in in-band mode:

  1. Change to the RREG home directory.

    If you are using in-band mode, the RREG directory is inside the Oracle Access Manager Oracle home:

    OAM_ORACLE_HOME/oam/server/rreg

    If you are using out-of-band mode, then the RREG home directory is the location where you unpacked the RREG archive.

  2. Change to the following directory:

    • (UNIX) RREG_HOME/bin

    • (Windows) RREG_HOME\bin

    cd RREG_HOME/bin/

  3. Set the permissions of the oamreg.sh command so that you can execute the file: 

    chmod +x oamreg.sh

  4. Enter the following command:

    ./oamreg.sh inband RREG_HOME/input/OAM11GRequest_edg.xml

In this example:

  • It is assumed that the edited OAM11GRequest.xml file is located in the RREG_HOME/input directory.

  • The output from this command is saved to the following directory:

    RREG_HOME/output/

The following example shows a sample RREG session:

Welcome to OAM Remote Registration Tool!
Parameters passed to the registration tool are: 
Mode: inband
Filename: /u01/oracle/products/fmw/iam_home/oam/server/rreg/client/rreg/input/OAM11GRequest_edg.xml
Enter admin username:weblogic_idm
Username: weblogic_iam
Enter admin password: 
Do you want to enter a Webgate password?(y/n):
n
Do you want to import an URIs file?(y/n):
n

----------------------------------------
Request summary:
OAM11G Agent Name:SOA12213_EDG_AGENT
Base URL: https://soa.example.com:443
URL String:null
Registering in Mode:inband
Your registration request is being sent to the Admin server at: http://host1.example.com:7001
----------------------------------------

Jul 08, 2015 7:18:13 PM oracle.security.jps.util.JpsUtil disableAudit
INFO: JpsUtil: isAuditDisabled set to true
Jul 08, 2015 7:18:14 PM oracle.security.jps.util.JpsUtil disableAudit
INFO: JpsUtil: isAuditDisabled set to true
Inband registration process completed successfully! Output artifacts are created in the output folder.

Parent topic: Running the RREG Tool

Running the RREG Tool in Out-Of-Band Mode

To run the RREG Tool in out-of-band mode on the WEBHOST server, the administrator uses the following command:

RREG_HOME/bin/oamreg.sh outofband input/OAM11GRequest.xml

In this example:

  • Replace RREG_HOME with the location where the RREG archive file was unpacked on the server.

  • The edited OAM11GRequest.xml file is located in the RREG_HOME/input directory.

  • The RREG Tool saves the output from this command (the AgentID_response.xml file) to the following directory: 

    RREG_HOME/output/

    The Oracle Access Manager server administrator can then send the AgentID_response.xml to the user who provided the OAM11GRequest.xml file.

To run the RREG Tool in out-of-band mode on the Web server client machine, use the following command:

RREG_HOME/bin/oamreg.sh outofband input/AgentID_response.xml

In this example:

  • Replace RREG_HOME with the location where you unpacked the RREG archive file on the client system.

  • The AgentID_response.xml file, which was provided by the Oracle Access Manager server administrator, is located in the RREG_HOME/input directory.

  • The RREG Tool saves the output from this command (the artifacts and files required to register the Webgate software) to the following directory on the client machine:

    RREG_HOME/output/

Parent topic: Running the RREG Tool

Files and Artifacts Generated by RREG

The files that get generated by the RREG Tool vary, depending on the security level you are using for communications between the WebGate and the Oracle Access Manager server. For more information about the supported security levels, see Securing Communication Between OAM Servers and WebGates in Administrator's Guide for Oracle Access Management.

Note that in this topic any references to RREG_HOME should be replaced with the path to the directory where you ran the RREG tool. This is typically the following directory on the Oracle Access Manager server, or (if you are using out-of-band mode) the directory where you unpacked the RREG archive: 

OAM_ORACLE_HOME/oam/server/rreg/client

The following table lists the artifacts that are always generated by the RREG Tool, regardless of the Oracle Access Manager security level.

File Location
cwallet.sso RREG_HOME/output/Agent_ID/
ObAccessClient.xml RREG_HOME/output/Agent_ID/

The following table lists the additional files that are created if you are using the SIMPLE or CERT security level for Oracle Access Manager:

File Location
aaa_key.pem RREG_HOME/output/Agent_ID/
aaa_cert.pem RREG_HOME/output/Agent_ID/
password.xml RREG_HOME/output/Agent_ID/

Note that the password.xml file contains the obfuscated global passphrase to encrypt the private key used in SSL. This passphrase can be different than the passphrase used on the server.

You can use the files generated by RREG to generate a certificate request and get it signed by a third-party Certification Authority. To install an existing certificate, you must use the existing aaa_cert.pem and aaa_chain.pem files along with password.xml and aaa_key.pem.

Parent topic: Registering the Oracle HTTP Server WebGate with Oracle Access Manager

Copying Generated Artifacts to the Oracle HTTP Server WebGate Instance Location

After the RREG Tool generates the required artifacts, manually copy the artifacts from the RREG_Home/output/agent_ID directory to the Oracle HTTP Server configuration directory on the Web tier host.

The location of the files in the Oracle HTTP Server configuration directory depends upon the Oracle Access Manager security mode setting (OPEN, SIMPLE, or CERT).

The following table lists the required location of each generated artifact in the Oracle HTTP Server configuration directory, based on the security mode setting for Oracle Access Manager. In some cases, you might have to create the directories if they do not exist already. For example, the wallet directory might not exist in the configuration directory.

Note:

For an enterprise deployment, Oracle recommends simple mode, unless additional requirements exist to implement custom security certificates for the encryption of authentication and authorization traffic. The information about using open or certification mode is provided here as a convenience.

Avoid using open mode, because in open mode, traffic to and from the Oracle Access Manager server is not encrypted.

For more information using certificate mode or about Oracle Access Manager supported security modes in general, see Securing Communication Between OAM Servers and WebGates in Administrator's Guide for Oracle Access Management.

File Location When Using OPEN Mode Location When Using SIMPLE Mode Location When Using CERT Mode
wallet/cwallet.sso OHS_CONFIG_DIR/webgate/config/wallet OHS_CONFIG_DIR/webgate/config/wallet/

Note:

By default the wallet folder is not available. Create the wallet folder under OHS_CONFIG_DIR/webgate/config/.
OHS_CONFIG_DIR/webgate/config/wallet/
ObAccessClient.xml OHS_CONFIG_DIR/webgate/config OHS_CONFIG_DIR/webgate/config/ OHS_CONFIG_DIR/webgate/config/
password.xml N/A OHS_CONFIG_DIR/webgate/config/ OHS_CONFIG_DIR/webgate/config/
aaa_key.pem N/A OHS_CONFIG_DIR/webgate/config/simple/ OHS_CONFIG_DIR/webgate/config/
aaa_cert.pem N/A OHS_CONFIG_DIR/webgate/config/simple/ OHS_CONFIG_DIR/webgate/config/

Note:

If you need to redeploy the ObAccessClient.xml to WEBHOST1 and WEBHOST2, delete the cached copy of ObAccessClient.xml from the servers. The cache location on WEBHOST1 is:
OHS_DOMAIN_HOME/servers/ohs1/cache/

And you must perform the similar step for the second Oracle HTTP Server instance on WEBHOST2: 

OHS_DOMAIN_HOME/servers/ohs2/cache/

Parent topic: Registering the Oracle HTTP Server WebGate with Oracle Access Manager

Restarting the Oracle HTTP Server Instance

For information about restarting the Oracle HTTP Server instance, see Restarting Oracle HTTP Server Instances by Using WLST in Administering Oracle HTTP Server.

If you have configured Oracle HTTP Server in a WebLogic Server domain, you can also use Oracle Fusion Middleware Control to restart the Oracle HTTP Server instances. For more information, see Restarting Oracle HTTP Server Instances by Using Fusion Middleware Control in Administering Oracle HTTP Server.

Parent topic: Registering the Oracle HTTP Server WebGate with Oracle Access Manager