Care and Handling
Equipment Placement
-
Keep the Express Station within an operating temperature between 0C (32F) and 60C (140F).
-
If you are placing your equipment in an area adjacent to carpeting, use an anti-static grade of carpeting. If you do not have anti-static carpeting, use static discharge mats.
-
Do not place equipment near food preparation areas, glass racks, or water stations. Although the Express Station is highly spill resistant, take care to avoid using electrical equipment near water.
-
Take precautions to prevent the accidental dropping of metallic objects such as paper clips and staples into the equipment.
Parent topic: Care and Handling
Electromagnetic Interference
-
Do not run exposed cables in the vicinity of AC power lines because the noise radiating from the AC power lines can be absorbed by Workstation 6 AC power and communication lines.
-
Keep devices that emit RF energy, such as cordless phones, at least eight inches from the equipment or cable during operation.
Parent topic: Care and Handling
Cleaning
LCD/Touchscreen
You can use any ammonia-free household cleaner or a 50/50 mix of isopropyl alcohol and distilled water applied with a clean, cotton cloth. Spray the cloth with the cleaner and then use the cloth to wipe the screen.
Cabinet
Use a chamois or a clean, lint-free cloth to clean the cabinet and screen surface. Do not use chemical, alcohol, or petroleum-based cleaners that are not recommended for plastics.
Magnetic Stripe Reader
Contact your Oracle representative for information and recommendations on magnetic stripe reader cleaning kits.
Parent topic: Care and Handling