This topic provides the systematic instructions to capture the additional details

1. On Additional Details screen, click the 3 dots on any Additional Details tile to view the details.

   Figure 2-11 Additional Details
   
   Description of the illustration deaddtionaldetls.png
   

   Limits and Collaterals

   The limits and collateral details are displayed as tile. The tiles displays a list of important fields with values.

   Note:

   For Guarantee Advising MT 760, user can input the values, applicable if Advising bank confirms undertaking.

   
   
   Description of the illustration delimitdetails.png
   

   Figure 2-12 Limit Details
   
   Description of the illustration delimitdetails1.png
   

   For more information on fields, refer to the field description table below.

   Table 2-14 Limit Details - Field Description

   Field	Description
   Limit Details	Specify the limit details.
   	Click plus icon to add new limit details. Below fields are displayed on the Limit Details pop-up screen, if the user clicks plus icon.
   Customer ID	This field displays the applicant’s/applicant bank customer ID defaulted from the application. The user can change the customer ID.
   Linkage Type	Select the linkage type. Linkage type can be: Facility Liability By default Linkage Type is “Facility”.
   Contribution %	System will default this to 100%. User can modify, if contribution is more than 100%. System will display an alert message, if modified. Once contribution % is provided, system will default the amount. System to validate that if Limit Contribution% plus Collateral% is equal to 100. If the total percentage is not equal to 100 application will display an alert message.
   Liability Number	Click Search to search and select the Liability Number from the look-up. The list has all the Liabilities mapped to the customer.
   Contribution Currency	Read only field. The LC currency will be defaulted in this field.
   Line ID/ Linkage Ref No	Click Search to search and select from the various lines available and mapped under the customer id gets listed in the drop down. LINE ID-DESCRIPTION will be available for selection along with Line ID. When you click on 'verify', the system will return value if the limit check was successful or Limit not Available. If limit check fails, the outstanding limit after the transaction value will be shown in the limit outstanding amount. Note: User can also select expired Line ID from the lookup and on clicking the verify button, system should default “The Earmarking cannot be performed as the Line ID is Expired” in the “Response Message” field. This field is disabled and read only, if Linkage Type is Liability.
   Limit/ Liability Currency	This field displays the limit currency. Limit Currency will be defaulted in this field, when you select the Liability Number.
   Limits Description	Read only field. This field displays the limits description.
   Limit Check Response	Read only field. This field displays the limit check response. Response can be ‘Success’ or ‘Limit not Available’ based on the limit service call response. The value in this field appears, if you click the Verify button.
   Amount to Earmark	Amount to earmark will default based on the contribution %. User can change the value.
   Expiry Date	Read only field. This field displays the date up to which the Line is valid.
   Limit Available Amount	Read only field. This field displays the value of available limit, i.e., limit available without any earmark. The Limit Available Amount must be greater than the Contribution Amount. The value in this field appears, if you click the Verify button.
   Response Message	Read only field. This field displays the detailed response message. The value in this field appears, if you click the Verify button.
   ELCM Reference Number	Read only field. This field displays the ELCM reference number.
   Limit Details - Grid	Below fields appear in the Limit Details grid along with the above fields.
   Line Serial	Read only field. Displays the serial of the various lines available and mapped under the customer id. This field appears on the Limits grid.
   Edit	Click the edit link to edit the limit details.

   Figure 2-13 Collateral Details
   
   Description of the illustration decollateraldetails1-1.png
   

   Table 2-15 Cash Collateral Details - Field Description

   Field	Description
   Collateral Percentage	System populates the Collateral % maintained in the Customer / Product for the counter party of the contract. User can modify the collateral percentage.
   Collateral Currency and amount	System populates the contract currency as collateral currency by default. User can modify the collateral Currency and amount.
   Exchange Rate	System populates the exchange rate maintained. System validates for the Override Limit and the Stop limit if defaulted exchange rate is modified.
   	Click plus icon to add new collateral details. Below fields are displayed on the Cash Collateral Details pop-up screen, if the user clicks plus icon.
   Total Collateral Amount	Read only field. This field displays the total collateral amount provided by the user.
   Collateral Amount to be Collected	Read only field. This field displays the collateral amount yet to be collected as part of the collateral split.
   Sequence Number	Read only field. The sequence number is auto populated with the value, generated by the system.
   Collateral Split %	Specify the collateral split% to be collected against the selected settlement account.
   Collateral Contribution Amount	Collateral contribution amount will get defaulted in this field. The collateral % maintained for the customer is defaulted into the Collateral Details screen. If collateral % is not maintained for the customer, then system should default the collateral % maintained for the product. User can modify the defaulted collateral percentage, in which case system should display a override message “Defaulted Collateral Percentage modified.
   Settlement Account	Click Search to search and select the settlement account for the collateral.
   Settlement Account Currency	Read only field. This field displays the settlement account currency and will be auto-populated based on the Settlement Account selection.
   Exchange Rate	Read only field. This field displays the exchange rate, if the settlement account currency is different from the collateral currency.
   Contribution Amount in Account Currency	Read only field. This field displays the contribution amount in the settlement account currency as defaulted by the system.
   Account Available Amount	Read only field. System populates the account available amount on clicking the Verify button.
   Response	Read only field. System populates the response on clicking the Verify button.
   Response Message	Read only field. System populates the response message on clicking the Verify button.
   Verify	Click to verify the account balance of the Settlement Account.
   Save & Close	Click to to save and close the record.
   Cancel	Click to cancel the entry.
   Cash Collateral Details - Grid	Below fields appear in the Cash Collateral Details grid along with the above fields.
   Collateral %	Specify the percentage of collateral to be linked to this transaction. If the value is more than 100% system will display an alert message. The collateral % maintained for the customer is defaulted into the Collateral Details screen. If collateral % is not maintained for the customer, then system should default the collateral % maintained for the product. User can modify the defaulted collateral percentage, in which case system should display a override message “Defaulted Collateral Percentage modified.
   Contribution Amount	This field displays the collateral contribution amount. The collateral % maintained for the customer is defaulted into the Collateral Details screen. If collateral % is not maintained for the customer, then system should default the collateral % maintained for the product. User can modify the defaulted collateral percentage, in which case system should display a override message “Defaulted Collateral Percentage modified.
   Account Balance Check Response	This field displays the account balance check response.
   	Click delete icon to delete the existing collateral details.
   Edit	Click edit link to edit the collateral details.

   Figure 2-14 Deposit Linkage Details
   
   Description of the illustration depositlinkagedetails1-1.png
   

   Table 2-16 Deposit Linkage Details

   Field	Description
   	Click plus icon to add new deposit linkage details.
   Customer ID	This field displays the applicant’s/applicant bank customer ID defaulted from the application. The user can change the customer ID.
   Deposit Account	Click Search to search and select deposit for linkage from the look-up. All the Deposits of the customer should be listed in the look-up search. User should be able to select the deposit for linkage.
   Deposit Branch	This field displays the deposit branch which will be auto-populated based on the deposit account selection.
   Deposit Available Amount	Amount will be auto-populated based on the Deposit Account selection.
   Deposit Maturity Date	Maturity Date of deposit is displayed based on the Deposit Account selection.
   Exchange Rate	This field displays the latest exchange rate for deposit linkage. This will be picked up from the exchange rate maintenance from the common core.
   Deposit Available In Transaction Currency	This field displays the deposit amount available, after exchange rate conversion, if applicable.
   Linkage Percentage %	Specify the value for linkage percentage.
   Linkage Amount (Transaction Currency)	System to default the transaction amount user can change the value. System validates the linking amount with available Deposit balance and should not allow to link more than the available amount.
   Deposit Details - grid	Below fields appear in the Deposit Details grid along with the above fields.
   Deposit Currency	The currency will get defaulted in this field.
   Transaction Currency	The currency will get defaulted in this field from the underlying task.
   	Click delete icon to delete the existing deposit linkage details.
   Edit	Click edit link to edit the deposit linkage details.

2. Click Save and Close to save the details and close the screen.

   Charge Details

   If default charges are available under the product, they should be defaulted here with values. If customer or customer group specific charges are maintained, then the same will be defaulted from back end system.

   
   
   Description of the illustration dechargedetails.png
   

   For more information on fields, refer to the field description table below.

   Field	Description
   Commission Details	Specify the commission details. All charges, commission and margin are collected from the counter-party by default.
   Component	This field displays the commission component. Click the link to view the component details.
   Rate	This field displays the rate that is defaulted from product. The commission rate, if available in Back Office defaults in OBTFPMCS. The user is able to change the rate. If flat commission is applicable, then commission amount defaulted from back office is modifiable by the user. Rate field will be blank and the user cannot modify the Rate field.
   Mod. Rate	From the default value, if the rate is changed the value gets updated in this field.
   Currency	This field displays the currency in which the commission have to be collected.
   Amount	This field displays the amount that is maintained under the product code. The commission rate, if available in Back Office defaults in OBTFPMCS. The user is able to change the rate, but not the commission amount directly. The amount gets modified based on the rate changed and the new amount is calculated in back office based on the new rate and is populated in OBTFPMCS. If flat commission is applicable, then commission amount defaulted from back office is modifiable by the user. Rate field will be blank and the user cannot modify the Rate field.
   Modified	From the default value, if the amount is changed, the value gets updated in the modified amount field.
   Defer	If enabled, charges/commissions has to be deferred and collected at any future step.
   Waive	Based on the customer maintenance, the charges/commission can be marked for Billing or Defer. If the defaulted Commission is changed to defer or billing or waive, system must capture the user details and the modification details in the ‘Remarks’ place holder.
   Charge Party	Charge party is 'Applicant' by default. User can change the value to Beneficiary.
   Settl. Account	Select the settlement account.
   Amendable	Displays if the field is amendable or not.
   Charge Details	Specify the charge details.
   Component	This field displays the charge component type.
   Tag Currency	This field displays the tag currency in which the charges have to be collected.
   Tag Amount	This field displays the tag amount that is maintained under the product code.
   Currency	This field displays the currency in which the charges have to be collected.
   Amount	This field displays the amount that is maintained under the product code.
   Modified	From the default value, if the rate is changed or the amount is changed, the value gets updated in the modified amount field.
   Billing	If charges are handled by separate billing engine, then by selecting billing the details to be available for billing engine for further processing. On simulation of charges/commission from Back Office, if any of the Charges/Commission component for the customer is ‘Billing’ enabled, ‘Billing’ toggle for that component should be automatically enabled in OBTFPMCS. The user can not enable/disable the option, if it is de-selected by default. This field is disabled, if ‘Defer’ toggle is enabled.
   Defer	If charges have to be deferred and collected at any future step, this check box has to be selected. On simulation of charges/commission from Back Office, if any of the Charges/Commission component for the customer is AR-AP tracking enabled, ‘Defer’ toggle for that component should be automatically checked in OBTFPM. The user can enable/disable the option the check box. On de-selection the user has to click on ‘Recalculate’ charges button for re-simulation.
   Waive	Enble the toggle, if charges has to be waived. Based on the customer maintenance, the charges should be marked for Billing or for Defer. This field is disabled, if Defer toggle is enabled.
   Charge Party	Charge party is applicant by default. User can change the value to beneficiary.
   Settlement Account	Select the settlement account.
   Tax Details	Specify the tax details. The tax component is calculated based on the commission and defaults if maintained at product level. User cannot update tax details and any change in tax amount on account of modification of charges/ commission will be available on click of Re-Calculate button or on hand off to back-end system.
   Component	This field displays the tax component.
   Type	This field displays the type of tax component.
   Value Date	This field displays the value date of tax component.
   Ccy	This field displays the currency in which the tax have to be collected. The tax currency is the same as the commission.
   Amount	This field displays the tax amount based on the percentage of commission maintained. You can edit the tax amount, if applicable.
   Billing	If taxes are handled by separate billing engine, then by selecting billing the details to be available for billing engine for further processing. This field is disabled, if ‘Defer’ toggle is enabled.
   Defer	If taxes have to be deferred and collected at any future step, this option has to be enabled. The user can enable/disable the option the check box. On de-selection the user has to click on ‘Recalculate’ charges button for re-simulation.
   Settl. Account	System defaults the settlement account. The user can modify the settlement account.

   Preview Message

   The bank user can view a preview of the outgoing SWIFT message and advise simulated from back office.

   Based on the Guarantee Cancellation details captured in the previous screen, the preview message simulated from the Back Office and the user can view the message
   
   Description of the illustration depreviewmessage-1.png
   

   For more information on fields, refer to the field description table below.

   Table 2-17 Preview Message - Field Description

   Field	Description
   Preview SWIFT Message	Displays the preview of SWIFT Messages.
   Language	Read only field. The language to preview the draft guarantee details. English is set as default language for the preview.
   Message Type	Select the message type from the drop-down.
   Message Status	Read only field. Displays the message status of the draft message.
   Repair Reason	Read only field. Displays the reason of repair.
   Preview Message	This field displays a preview of the draft message. Based on the guarantee text captured in the previous screen, guarantee draft is generated in the back office and is displayed in this screen.
   Preview Mail Device	Based on the guarantee amendment captured in the previous screen, the preview message-mail advice is simulated from the back office and the user can view the message.
   Language	Read only field. The language for the advice message. English is set as default language for the preview.
   Advice Type	Select the advice type.
   Message Status	Read only field. Displays the message status of the mail advice.
   Repair Reason	Read only field. Displays the reason of repair.
   Preview Message	This field displays a preview of advice.

3. Click Save and Close to save the details and close the screen.
4. Click Next.
   The task will move to next data segment.

   For more information on action buttons, refer to the field description table below.

   Table 2-18 Additional Details - Action Buttons - Field Description

   Field	Description
   Clarification Details	Clicking the button opens a detailed screen, user can see the clarification details in the window and the status will be 'Clarification Requested'.
   Documents	Click to View/Upload the required document. Application displays the mandatory and optional documents. The user can view and input/view application details simultaneously. When a user clicks on the uploaded document, Document window get opened and on clicking the view icon of the uploaded document, Application screen should get split into two. The one side of the document allows to view and on the other side allows to input/view the details in the application
   Remarks	Specify any additional information regarding the Guarantee Advise Cancellation Islamic. This information can be viewed by other users processing the request. Content from Remarks field should be handed off to Remarks field in Backend application.
   Overrides	Click to view the overrides accepted by the user.
   Customer Instructions	Click to view/ input the following Standard Instructions – In this section, the system will populate the details of Standard Instructions maintained for the customer. User will not be able to edit this. Transaction Level Instructions – In this section, OBTFPMCS user can input any Customer Instructions received as part of transaction processing. This section will be enabled only for customer initiated transactions.
   Incoming Messages	Click this button, the system allows to display the incoming SWIFT MT 767 message received. In case of MT798-MT726-MT759 request, user can view MT798 message(726-759) in this placeholder in Header of the task. In case of MT798_MT788-MT799 request, user can view MT798 message (788-799) in this placeholder in Header of the process-task.
   View Undertaking	Click on View Undertaking button enables user to view the details of the undertaking.
   Request Clarification	User can submit the request for clarification to the “Trade Finance Portal” User for the transactions initiated offline
   Save & Close	Save the details provided and holds the task in ‘My Task’ queue for further update. This option will not submit the request.
   Cancel	Cancel the Scrutiny stage inputs. The details updated in this stage are not saved. The task will be available in 'My Task' queue.
   Hold	The details provided will be saved and status will be on hold. User must update the remarks on the reason for holding the task. This option is used, if there are any pending information yet to be received from applicant.
   Reject	On click of Reject, user must select a Reject Reason from a list displayed by the system. Reject Codes are: R1- Documents missing R2- Signature Missing R3- Input Error R4- Insufficient Balance/Limits R5 - Others Select a Reject code and give a Reject Description. This reject reason will be available in the remarks window throughout the process.
   Refer	Select a Refer Reason from the values displayed by the system. Refer Codes are: R1- Documents missing R2- Signature Missing R3- Input Error R4- Insufficient Balance/Limits R5 - Others
   Back	On click of Back, system moves the task back to previous data segment.
   Next	On click of Next, system validates if all the mandatory fields have been captured. Necessary error and override messages to be displayed. On successful validation, system moves the task to the next data segment.